• 한국ITS학회 논문지
• /
• 제14권6호
• /
• pp.133-140
• /
• 2015

차세대지능형교통시스템(C-ITS)는 차량과 차량, 차량과 인프라 간의 양방향 통신으로 교통 정보를 공유하여 더욱 편리하고 안전하게 교통을 제어하는 시스템이다. C-ITS의 보안에 대한 준비가 제대로 갖춰지지 않을 경우 일시적인 교통 마비 및 대형 교통사고를 유발할 수 있고, 이에 따라 운전자의 생명에도 직접적인 영향을 미칠 수 있다. 본 논문에서는 C-ITS에서 발생할 수 있는 사이버 공격들을 시나리오를 통해 연구하여 그 예방 및 대응 방안을 제시한다.

• 중소기업융합학회논문지
• /
• 제3권1호
• /
• pp.31-41
• /
• 2013

치명적인 사고를 막기 위해 드라이버 졸음 (DD)를 검출하는 다양한 최근 방법이 제안되고있다. 본 논문은 운전자의 눈에 폐쇄 속도를 모니터링 할 수 있는 기능을 AdaBoost 기반 물체 검출 알고리즘에 적용한 DD 탐지 시스템 구현에서 하드웨어/소프트웨어 공동 설계 방법을 제안한다. 소프트웨어 구성 요소는 DD 검출 알고리즘 중에서 필요한 기능성을 완전하게 달성하기 위해 전체적인 제어 및 논리 연산을 구현한다. 반면, 본 연구에서는 DD 검출 알고리즘의 중요한 기능은 처리를 가속화하기 위해 맞춤형 하드웨어 구성 요소를 통해 가속된다. 하드웨어/소프트웨어 아키텍처는 비디오 도터 보드와 알테라 DE2 보드에 구현되었습니다. 제안 된 구현의 성능을 평가하고 몇 가지 최근의 작품을 벤치마킹했다.

• 대한임베디드공학회논문지
• /
• 제8권5호
• /
• pp.235-242
• /
• 2013

Recently, the number of automotive electrical and electronic system has been increased because the requirements for the convenience and safety of the drivers and passengers are raised. In most cases, the data for controlling the various sensors and automotive electrical and electronic system used in runtime should be stored on the internal or external non-volatile memory of the ECU(Electronic Control Units). However, the non-volatile memory has a constraint with write limitation due to the hardware characteristics. The limitation causes fatal accidents or unexpected results if the non-volatile memory is not managed. In this paper, we propose a management scheme for using non-volatile memory to prolong the writing times based on AUTOSAR(AUTOmotive Open System Architecture) platform. Our proposal is implemented on the CDD(Complex Device Driver) and uses an algorithm which swaps a frequently modified block for a least modified block. Through the development of the prototype, the proposed scheme extends the lifetime of non-volatile memory about 1.08 to 2.48 times than simply using the AUTOSAR standard.

• KIEAE Journal
• /
• 제7권6호
• /
• pp.99-106
• /
• 2007

Tower crane is a large construction equipment which is extremely tall for its section when it is erected, with its high slenderness ratio, and it has a heavy load by itself due to large lifting stuff to handle. In line with the construction projects in these days which increasingly tend to become higher, larger and complex, the stuff and height subject to lifting are also getting larger and higher, which has also increased the risk of disastrous accidents. A stable foundation design thus to deal with the increasing self load becomes more important. When a typhoon Maemi swept the nation in 2003, as many as 43 tower cranes fell down or collapsed, causing a severe damage to the people and the properties. Considering such fatal damages, a technical evaluation of the stability to prevent the safety accident with the tower crane must be very crucial. Tower cranes operation in domestic construction sites, in fact, have been simply dependent on personal experience and intuition of the engineers. Particularly when it comes to the foundation design, it mostly depends on manufacturer's recommendation. The study hence was intended to develop the fundamental measures for granting the objective stability, instead of following the individual's experience only. The simulation model recommended in the study is expected to make a good commitment to achieving an effective lifting work as well as preventing the safety accident.

• 한국해안해양공학회지
• /
• 제11권1호
• /
• pp.1-6
• /
• 1999

해안 및 해양에 설치되어 있는 해저관로는 원유, 가스, 물과 이들의 혼합된 유체들을 전달하기 위한 수단으로 사용되고 있다. 관로 내부 유체의 열과 압력 차이는 해저관로의 팽찰을 야기시킨다. 해전관로 팽창은 관로와 연결되는 구조물들에 응력을 유발시킨다. 작용 응력이 연결 부재의 항복점을 초과하거나 전체 시스템의 허용변형을 초과할 경우 구조물에 손상이 발생된다. 해안 및 해양에 설치되는 해저관로는 주로 위험 물질이나 유독 유체를 포함하기 때문에 만약 이런 유체의 유출이 발생될 경우 인명 피해는 물론 큰 경제적 손실을 가져온다. 비록 해저관로는 시간적/공간적 제약 없이 유체를 전달할 수 있지만, 이런 관로 설계시 안전하게 그 기능을 수행할 수 있도록 고려되어야 한다. 본 논문에서는 해저관로의 열변형 해석에 사용되는 여러 개의 이론을 조사하였고, 관로의 요소들이 관로 팽창에 미치는 영향에 대해 조사하였다.

• 한국안전학회지
• /
• 제29권1호
• /
• pp.37-40
• /
• 2014

Article 29(3) of Occupational Safety And Health Act, which states a contractor can request a design change to an employer of businesses under the risk condition of construction of temporary structure, was established. Accordingly, in this study, recent fatal accidents caused by temporary structures were analyzed, and the level of inclusion of temporary structures in the design document were examined, and high risk temporary structures were classified. In addition, the requirements of design change of temporary structures were presented, and the qualifications of expert to certify the design change were proposed.

• 한국재료학회지
• /
• 제20권3호
• /
• pp.148-154
• /
• 2010

It is necessary to develop new methods to prevent catastrophic failure of structural material in order to avoid accidents and conserve natural and energy resources. Design of intelligent materials with a self-diagnosing function to prevent fatal fracture of structural materials was achieved by smart composites consisting of carbon fiber tows or carbon powders with a small value of ultimate elongation and glass fiber tows with a large value of ultimate elongation. The changes in electrical resistance of CF-GFRP/GFRP (carbon fiber and glass fiber-reinforced plastics/glass fiber-reinforced plastics) composites increased abruptly with increasing strain, and a tremendous change was seen at the transition point where carbon fiber tows were broken. Therefore, the composites were not to monitor damage from the early stage. On the other hand, the change in electrical resistance of CP-GFRP/GFRP (carbon powder dispersed in glass fiber-reinforced plastics/glass fiber-reinforced plastics) composites increased almost linearly in proportion to strain. CP-GFRP/GFRP composites are superior to CF-GFRP/GFRP composites in terms of their capability to monitor damage by measuring change in electrical resistance from the early stage of damage. However, the former was inferior to the latter as an application because of the difficulties of mass production and high cost. A method based on monitoring damage by measuring changes in the electrical resistance of structural materials is promising for improved reliability of the material.

• 한국표면공학회지
• /
• 제49권4호
• /
• pp.389-394
• /
• 2016

The operation method of nuclear power plants is currently changing to high burn-up and long period that can enhance economics and efficiency of the plant. Since nuclear plant operation environment has been becoming severe, the amount of absorbed hydrogen also has increased. Absorbed hydrogen can be fatal securing safety of nuclear fuel cladding in case of Loss of Coolant Accidents(LOCA). In order to examine the impact of hydride on high-temperature oxidation, high-temperature oxidation experiment was performed on normal Zry-4 cladding and on Zry-4 cladding where hydrogen is charged in air pressure steam atmosphere under the $950^{\circ}C$ and $1000^{\circ}C$. According to the results, while oxidation acceleration due to charged hydrogen was not observed prior to breakaway oxidation creation, oxidation began to accelerate in cladding where hydrogens charged as soon as the breakaway oxidation started. If so much hydrogen are charged in the cladding, equiaxial monoclinic phase to unstable of stress is formed and it is presumed that oxidation is accelerated because nearby stress caused a crack in equiaxial phase, and that makes corrosion resistance decline sharply.

• Journal of Dental Anesthesia and Pain Medicine
• /
• 제16권3호
• /
• pp.165-173
• /
• 2016

Dentists often sedate patients in order to reduce their dental phobia and stress during dental treatment. Sedatives are administered through various routes such as oral, inhalation, and intravenous routes. Intravenous administration has the advantage of rapid onset of action, predictable duration of action, and easy titration. Typically, midazolam, propofol or dexmedetomidine are used as intravenous sedatives. Administration of these sedatives via infusion by using a syringe pump is more effective and successful than infusing them as a bolus. However, during intravenous infusion of sedatives or opioids using a syringe pump, fatal accidents may occur due to the clinician's carelessness. To prevent such risks, smart syringe pumps have been introduced clinically. They allow clinicians to perform effective sedation by using a computer to control the dose of the drug being infused. To ensure patient safety, various alarm features along with a drug library, which provides drug information and prevents excessive infusion by limiting the dose, have been added to smart pumps. In addition, programmed infusion systems and target-controlled infusion systems have also been developed to enable effective administration of sedatives. Patient-controlled infusion, which allows a patient to control his/her level of sedation through self-infusion, has also been developed. Safer and more successful sedation may be achieved by fully utilizing these new features of the smart pump.

• 대한교통학회지
• /
• 제16권4호
• /
• pp.89-98
• /
• 1998

교통사고의 원인은 인적 요인, 차량적 요인, 도로 환경적 요인으로 분류된다. 주어진 도로 환경과 차량 조건하에서는 운전자가 마지막으로 안전을 제어할 책임을 지고 있다. 따라서, 교통사고를 사전에 예방하기 위하여 운전자의 교통법규 위반 행위에 대하여는 도로교통법에 근거하여 징역, 벌금, 구류, 과료, 과태료, 범칙금에 처하고 있다. 교통법규 위반 행위 단속 시에는 교통사고 유발 가능성과 위험도에 따라 단속의 강약을 포함하여 차등화된 처벌이 이루어져야 한다. 교통 범칙금 기준 제시를 위하여 1991~1995년의 5년간 교통사고 및 교통법규 위반을 분석한 결과 전체 교통법규 위반 단속 중 교통사고를 야기하는 동적 위반 행위인 사고관련 위반 행위 단속의 비율이 44%로 일본의 61%에 비해 매우 낮은 수준이다. 따라서 사고유발 가능성에 근거한 교통법규 위반 행위 단속의 강화가 필요하다. 한편 범칙금 부과방안으로 피해도 모형과 빈도 모형을 비교한 결과 교통법규 위반 행위로 인해 발생된 교통사고 비용을 고려한 피해도 모형은 범칙금의 차등화가 분명하지 않고 변별력이 뚜렷이 나타나지 않아 적합하지 않은 것으로 분석되었다. 교통법규 위반 행위에 따른 빈도 모형은 교통사고 건수와 사망사고 건수의 가중치(w)설정을 위해 동적 위반행위가 우리나라와 유사한 일본 자료와 비교한 결과 가중치가 한국=0.7, 일본=0.8일 때 상대적으로 $x^2$가 31.71로 가장 낮게 나타났다. 따라서, 사고건수에 대한 가중치는 0.7로 사망사고에 대한 가중치는 0.3을 적용하였다. 마지막으로 현행 범칙금과 제안된 범칙금을 비교분석하였다.