• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.4 s.334
• /
• pp.37-44
• /
• 2005

In this paper, a new type of the TC-to-BC encoder for high speed flash ADC's, called the Successive Selection Encoder (SSE), is proposed. In contrast to the conventional fat tree encoder based on OR operations, the W- outputs, in the new design, are obtained directly from TC inputs through simple MUX operations. The detailed structure of the SSE has been determined systematically by the method of the logical effort and the simulation oil Hynix 0.25um process. The theoretical and experimental results show that (1) it is not required to generate one-out-of-n signals, (2) the number of gates is reduced by the factor of 1/3, and (3) the speed is improved more than 2-times, compared to the fat tree encoder. It is speculated that the SSE proposed in this study is an effective solution for bottleneck problems in high speed ADCs.

• Journal of the Institute of Convergence Signal Processing
• /
• v.8 no.3
• /
• pp.205-210
• /
• 2007

This paper presents a CMOS TIQ flash A/D converter which operates very fast compared to other types of A/D converters due to its parallel architecture. The output resolution of designed A/D converter is 6-bit. In order to reduce the power consumption and chip area of conventional flash A/D converter, TIQ based flash A/D converter is proposed, which uses the advantage of the structure of CMOS transistors. The length and width of transistors of TIQ were determined with HSPICE simulation. To speed up the ultra-high speed flash A/D converter, the Fat Tree Encoder technique is used. The TIQ A/D converter was designed with full custom method. The chip's maximum power consumption was 38.45mW at 1.8V, and the operating speed of simulation was 2.7 GSPS.

• Journal of the Institute of Convergence Signal Processing
• /
• v.9 no.3
• /
• pp.224-229
• /
• 2008

In the paper, a new Constraint algorithm is proposed to solve the fan-in problem occurred in the encoding circuitry of an ADC. The Flash ADC architecture uses a Double-Base Number System(DBNS). The DBNS has been known to represent the Multidimensional Logarithmic Number System (MDLNS) used for implementing the multiplier accumulator architecture of FIR filter in Digital Signal Processing (DSP) applications. The authors use the DBNS with the base 2 and 3 in designing ADC encoder circuits, which is called as Double Base Integer Encoder(DBIE). A symmetric map is analyzed first, and then asymmetric map is followed to provide addition ready DBNS for DSP circuitry. The simulation results of the DBIE circuits in 6-bit and 8-bit ADC show the effectiveness of the Constraint algorithm with $0.18{\mu}m$ CMOS technology. The DBIE yields faster processing speed compared to the speed of Fat Tree Encoder (FAT) circuits by 17% at more power consumption by 39%.

• Journal of Electrical Engineering and Technology
• /
• v.3 no.3
• /
• pp.430-435
• /
• 2008

In the paper, an algorithm called a Constraint algorithm is proposed to solve the fan-in problem occurred in ADC encoding circuits. The Flash ADC architecture uses a double-base number system (DBNS). The DBNS has known to represent the multi-dimensional logarithmic number system (MDLNS) used for implementing the multiplier accumulator architecture of FIR filter in digital signal processing (DSP) applications. The authors use the DBNS with the base 2 and 3 to represent binary output of ADC. A symmetric map is analyzed first, and then asymmetric map is followed to provide addition read DBNS to DSP circuitry. The simulation results are shown for the Double-Base Integer Encoder (DBIE) of the 6-bit ADC to demonstrate an effectiveness of the Constraint algorithm, using $0.18{\mu}\;m$ CMOS technology. The DBIE’s processing speed of the ADC is fast compared to the FAT tree encoder circuit by 0.95 GHz.

• Journal of the Institute of Convergence Signal Processing
• /
• v.10 no.4
• /
• pp.289-293
• /
• 2009

This study proposes a novel double-base log encoder (DBLE) for flash Analog-to-Digital converters (ADCs). Analog inputs of flash ADCs are represented in logarithmic number systems with bases of 2 and 3 at the outputs of DBLE. A look up table stores the sets of exponents of base 2 and 3 values. This algorithm improves the performance of a DSP (Digital Signal Processor) system that takes outputs of a flash ADC, since the double-base log number representation does multiplication operation easily within negligible error range in ADC. We have designed and implemented 6 bits DBLE implemented with ROM (Read-Only Memory) architecture in a $0.18\;{\mu}m$ CMOS technology. The power consumption and speed of DBLE are better than the FAT tree and binary ROM encoders at the cost of more chip area. The DBLE can be implemented into SoC architecture with DSP to improve the processing speed.