• Proceedings of the Korean Society of Computer Information Conference
• /
• 2010.07a
• /
• pp.35-38
• /
• 2010

본 논문에서는 일상생활 속에서 무자각적으로 생체신호를 측정하고 분석하여 감성을 평가할 수 있는 임베디드 시스템에 관하여 연구하였다. 지속적으로 변화하는 감성을 일관적이며 신뢰성이 높은 생리적인 방법으로 평가하기 위해 심전도(ECG:Electrocardiogram), 맥파(PPG:Photoplethysmogram)의 두 가지 생체신호를 측정하고, 무선전송(Bluetooth) 장치를 이용하여 측정한 생체신호를 실시간으로 노트북PC로 전송하여 분석하였다. 생체신호의 분석방법은 FFT(Fast Fourier Transform)과 전력스펙트럼밀도(Power Spectrum Density)를 이용한 주파수 분석방법으로 두 생체신호의 특정 주파수 대역이 가지는 자율신경계의 활성도의 비율을 분석하여 비교 연구하였다. 또한 보다 빠르고 정확한 감성을 평가하기 위하여 분석알고리즘의 연산을 최소화 하였으며 그래프를 이용한 분석결과의 시각화를 하였다. 본 논문에서는 무자각적인 생체신호 측정 시스템을 이용하여 다양한 상황에서 생체신호를 측정하고, 개발한 분석 알고리즘으로 분석한 결과의 차이를 연구하여 정확도 및 신뢰도를 기준으로 감성을 평가하기 위한 분석 시스템을 평가하였다.

• Advances in aircraft and spacecraft science
• /
• v.5 no.2
• /
• pp.177-186
• /
• 2018

This paper deals with the idea to replace the usual high-level sine sweep test on shaker at system level, very severe, by a low level one completed by a transient test in the same configuration, in order to be more representative of the real environment, thus limiting over testing and improving the payload comfort. The problem of the transient test specification is first discussed. The proposed solution is to derive from LV/SC coupled analyses a shock response spectrum corresponding to two damping ratios. Then, the question of adequate shock synthesis is tackled. A new method with a given spectrum is considered for better potential and accuracy than the usual wavelets. A campaign on the Intespace bi-shaker devoted to system level showed its capability to perform the resulting test with one spectrum. First investigations to extend this approach to two spectra are in progress.

• Proceedings of the KIEE Conference
• /
• 1993.07a
• /
• pp.281-283
• /
• 1993

A new method of EEG spindle waveform detection i s presented. The method combines the signal conditioning in the time-domin and the analysis of local spectrum in the frequency-domain. Fast computation methods, utilizing some effective approximations, are also suggested for the desist and implementation of the filter as well as for the computation of the local spectrum. The presented approach is especially useful for the real-time implementation of the waveform detection system under a general purpose microcomputer environment. The overall detection system is implemented and tested on-line with the total 24 hour data of selected four subjects. The result show the average agreement of 86.7% with the visually inspected result.

• Journal of Sensor Science and Technology
• /
• v.24 no.3
• /
• pp.169-174
• /
• 2015

In this study, we developed a system to detect the various defects in the metallic objects using the phenomenon that the defects cause the changes of the natural resonant frequencies. Our system consists of a FFT Amp, an Auto Impact Hammer, a Hammer controller and a PC. Auto Impact Hammer creates vibrations in the metallic objects when tapped on the surface. These vibrational signals are converted to the voltage signals by an acceleration sensor attached to the metallic part surface. These analog voltage signals were fed into an ADC (analog-digital converter) and an FFT (fast fourier transform) conversion in the FFT Amp to obtain the digital data in the frequency domain. Labview graphical program was used to process the digital data from th FFT amp to display the spectrum. We compared those spectra with the standard spectrum to find the shifts in the resonant frequencies of the metal parts, and thus detecting the defects. We used PCB's acceleration sensor and TI's TMS320F28335 DSP (digital signal processor) to obtain the resolution of 2.93 Hz and to analyze the frequencies up to 44 kHz.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.3
• /
• pp.167-172
• /
• 2010

In this paper, we analyze and simulate the performance of a pilot signal detection algorithm based on fast Fourier transform (FFT) for several system parameters in order to detect advanced television system committee digital television (ATSC DTV) signals. Requirements for detecting DTV signals are analyzed. And the detection performance is compared according to sensing frequency and time. Form the simulation results, it is confirmed that the signal detection performance increases as the sensing frequency rises. The results of this paper can be applied for implementing cognitive radio (CR) systems in the frequency band of DTV signals.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.5
• /
• pp.2434-2453
• /
• 2019

To improve the separation performance of time-frequency overlapped radar and communication signals from a single channel, this paper proposes an effective separation method based on an improved empirical wavelet transform (EWT) that introduces a fast boundary detection mechanism. The fast boundary detection mechanism can be regarded as a process of searching, difference optimization, and continuity detection of the important local minima in the Fourier spectrum that enables determination of the sub-band boundary and thus allows multiple signal components to be distinguished. An orthogonal empirical wavelet filter bank that was designed for signal adaptive reconstruction is then used to separate the input time-frequency overlapped signals. The experimental results show that if two source components are completely overlapped within the time domain and the spectrum overlap ratio is less than 60%, the average separation performance is improved by approximately 32.3% when compared with the classic EWT; the proposed method also improves the suitability for multiple frequency shift keying (MFSK) and reduces the algorithm complexity.

• The Journal of the Korea Contents Association
• /
• v.7 no.7
• /
• pp.60-67
• /
• 2007

The spectrum sensing is important for decision of using frequency band. It checks the frequency band for cognitive radio system. In this paper, we apply autocorrelation function to the energy detection method. We use the autocorrelation function to improve the performance of spectrum sensing method based on the energy detection method. This method is different from cyclostationary process method where parameters such as the mean or the autocorrelation function are time-varying periodically. And we propose improved method that is robust in poor radio environment. If the proposed method applies for sensing in the cognitive radio system, it will have the structural simplicity and the fast computation of spectrum sensing.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.21 no.6
• /
• pp.105-114
• /
• 1984

A fast pseudo-noise (PN) sequence acquisition algorithm for the direct-sequence (DS) spread spectrum system is proposed. The basic concept of the algorithm has been adopted from that of the classical sliding correlator. Mathematical modeling, analysis and computer simulation of the proposed system have been done. The results of analysis and computer simulation show that the acquisition system yields a significant performance improvement over the sliding correlator. Its acquisition time takes only 45 ms when signal-to-noise ratio(SNR) is -18dB. The algorithm developed has been implemented in hardware and its experimental result is also given.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.11
• /
• pp.19-31
• /
• 1996

Spread spectrum method gurantees good performance in digital communication system under multi-path interference and jamming signals. The purpose of this paper is to develop the wireless modem using DS/SS techinque. The transceiver consists of a spread spectrum DQPSK transmitter and a mtching receiver. The system operates with the chipping rate set to 4 Mcps and the number of chips/symbol at 64, making the data rate 62.5 Kbps using QPSK modilation. The receiver section uses a digital matched filter for fast acquisition of burst signals and uses the comparing the BER of proposed system iwth that of narrow bnd system under various additive white gaussian noises. It is showen that the proposed sysem has better performance than narrow band system. When jamming signals is added to the suggested DS/SS system, we also show that the experimental performance (BER) of the suggested wireless modem is almost same as theroretical performance.

• Proceedings of the IEEK Conference
• /
• 2000.06a
• /
• pp.252-255
• /
• 2000

In this paper, a fast pseudo-noise (PN) code acquisition with novel adaptive architecture is presented in direct-sequence spread- spectrum (DS-SS) systems. Since an existing acquisition system has a fixed correlation tap size and threshold value, this system cannot adapt to various mobile communication environments and results in a low detection probability or a high false alarm rate and long acquisition time. Therefore, if a correlation tap size and a threshold value can be controlled adaptively according to received signals, problems of ail existing system will be solved. The system parameter varies adaptively by using constant false alarm rate (CFAR) algorithm well known in a field of detection and proposed signal-to-noise ratio (SNR) measurement system. By deriving formulas of the proposed system, the performance is analyzed.