• The Korean Journal of Soil Zoology
• /
• v.9 no.1_2
• /
• pp.1-5
• /
• 2004

Insect pests and their natural enemies of Hibiscus Linne (Malvaceae) were investigated from March 2002 to November 2004. Fourteen insect pest species of 9 families in 5 orders were collected from Hibiscus syriacus: 5 species in Homoptera, 3 species in Lepidoptera, 2 species in Coleoptera, 1 species in Orthoprera, 1species in Hemiptera, 1 spedies in Acarina, and 1 species in Stylommatophora. Especially, Aphis gossypii Glover (Aphididae), Anomis megogona Walker(Noctuidae) and Tetranychus urticae Koch (Tetranychidae) were very important species because of their increasing daminge. The highest donsities were observed from May to June in August in Tetranychus urticae. As the enemies and ento-mopathogens of insect pests on Hibiscus syriacus, 1 species of bacteria, 3 species of fungi, 1 species of fungi, 1 species of Hemiptera, 1 species of Coleoptera, 2 species of Hymenopetera, 2 species of Diptera, and 1 species of Acarina were investigated. As the predators and parasitoids of Aphis gossypii, Aphidoletes aphidoletes aphidimyza Rondani (Cecidomyiidae), Meliscaeva cinctella Zetterstedt (Syrphidae), Harmonia axyridis Pallas (Coccinellidae), and Aphidius gifuensis Ashmead (Braconidae), entomopathogenic fungi, Vericillium lecani naturalis strain (Moniliaceae) and Beauveria bassiana naturalis strain strain (Hypocreaceae) were observed and Bacillus thuringiensis naturalis strain (Bacillaceae), B. bassiana, Metarhizium anisopliae naturalis strain (Hypocreaceae), predators of Tetranychus urticae, Amblyseius sp. (Phytoseiidae), and Orius sp. (Anthocoridae) were observed.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.62 no.1
• /
• pp.73-78
• /
• 2017

This study was conducted to elucidate the effects of mulching materials on root growth characteristics and weed occurrence of Platycodon grandiflorum transplants (3 years old) in organic farming. After transplanting, roots were mulched with one of three mulching materials (biodegradable film, sawdust, or rice husks) or a control (no mulching). The average root diameter of all mulching groups was 28.1 mm, which was 5.1 mm thicker than the no-mulching treatment. Roots with the biodegradable film treatment were the thickest at 30.9 mm. Root length was the shortest, 22.0 cm, with rice husk mulching. The number of rootlets was the highest with film mulching (36.0 rootlets/root) and the lowest with no mulching. For root fresh weight, which directly affects yield, the average of treated and untreated roots was 100 and 56 g/root, respectively. The highest fresh weight was in the biodegradable film plot (130 g/root). The mulching treatment groups showed a weed inhibition effect compared with the no-mulching treatment. The dominant weeds with the no-mulching treatment were Setaria viridis and Digitaria ciliaris, and that with the mulching treatment was Setaria viridis. Average annual weed occurrence across all treatments was 72%. Weed occurrence was the highest with the no-mulching treatment ($125weeds/m^2$), and there were no weeds with the biodegradable film treatment.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.3
• /
• pp.440-448
• /
• 2016

As recent buildings become more air tight, the natural ventilation rate is significantly reduced and it leads to difficulty in removing accumulated moisture in buildings. Hot and humid weather in summer and the large amount of moisture caused by indoor activity are the major factors of moisture problem in Korea. The hygrothermal behavior of building environment has to be considered carefully to reduce condensation risk and mold growth potential, and comfortable indoor environment. In this study, we evaluated hygrothermal behavior of Standard Wood-frame Structure published in the Korea Rural Community Corporation Using WUFI simulation program. The results indicated that the total water contents of wood wall measured in 2014 was lower than wood wall in 2010. As a result of evaluation by separating the farming and fishing areas, Moisture problems in fishing area became larger. The walls had a significant impact on the relative humidity than the temperature each areas. Furthermore, excessive water content problem of the wood-based material was reduced in the wall that could be applied in the fishing villages by changing the outdoor finishing materials. And Mold growth risk on the interior materials could be removed through the different setting of the indoor temperature during summertime.

• Korean journal of applied entomology
• /
• v.43 no.3 s.136
• /
• pp.211-215
• /
• 2004

Temperature-fecundity of the melon aphid, Aphis gossypii Glover, was studied at constant temperatures ranging from 15 to $32.5^{\circ}C$ under $60-70\%$ RH and a photoperiod of 16 : 8 (L : D) A life table parameters were constructed using the results. The longevity of A. gossypii gradually increased with decreasing temperature below $27.5^{\circ}C$. Also fecundity increased with decreasing temperature and the highest fecundity was 61.8 nymphs per female at $17.5^{\circ}C$. However. daily fecundity increased with increasing temperatures up to $22.5^{\circ}C$ showing 5.9 nymphs per day and thereafter decreased. Longevity and fecundity of the adult in the greenhouse with an average temperature of $21^{\circ}C$ and $65.6\%$ RH, were 20.0 days and 59.6, respectively, which were longer and higher than those in the growth chamber with similar conditions. net reproductive rate (Ro) was 54.9 at $17.5^{\circ}C$ while intrinsic rate of increase ($r_m$) and finite rate of increase ($\lambda$) were the highest 0.5 and 1.6 at $30^{\circ}C$, respectively. doubling time (DT) and mean generation time (T) were the shortest 1.4 and 6.8 at $30^{\circ}C$ indicating that optimal temperature for the development is $30^{\circ}C$.

• Korean journal of applied entomology
• /
• v.43 no.4 s.137
• /
• pp.305-310
• /
• 2004

The development of Myzus persicae (Sulzer) was studied at temperatures ranging from 15 to $32.5^{\circ}C$ under $70{\pm}5\%$ RH, and a photoperiod of 16:8 (L:D). Mortality of 1st-2nd nymph was higher than that of 3rd-4th nymph at the most temperature ranges whereas at high temperature of $32.5^{\circ}C$, more 3-4nymph stage individuals died. The total developmental time ranged from 12.4 days at $15^{\circ}C$ to 4.9 days at $27.5^{\circ}C$, suggesting that higher the temperature, faster the development. However, at higher end temperature ranges of 30 and $32.5^{\circ}C$, the development took 5.0 and 6.3 days, respectively. The lower developmental threshold temperature and effective accumulative temperatures for the total immature stage were $4.9^{\circ}C$ and 116.5 day-degrees. The nonlinear shape of temperature related development was well described by the modified Sharpe and DeMichele model. When the normalized cumulative frequency distributions of developmental times for each life stage were fitted to the three-parameter Weibull function, attendance of shortened developmental times was apparent with pre-nymph, post-nymph, and total nymph stages in descending order. The coefficient of determination $r^2$ ranged between 0.87 and 0.94.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.40 no.3
• /
• pp.214-224
• /
• 2004

A large cage system for the purpose of fishes farming in the open sea was influenced by various forces from the ocean environment. The deformation of the cage by these forces affects the safety of the cage itself, as well as that of the cultivated creatures. In this research, theoretical model was established to analyzing dynamic movement influenced by current for cage. Also, to increase the accuracy of calculations, the reduction ratio of flow speed acquired using the flume tank experiment. Applying the reduction ratio of flow speed to the numerical calculation, the calculation values were compared with the measured values in the flume tank experiment using cage model. The results were as follows ; 1. When the flow speed of the flume tank is fixed, the decrease of the velocity of flow which is passed the upper panel side is proportion to the increase of porosity ratio of netting. 2. When the porosity ratio is fixed, the increase of the velocity of flow which is passed the upper panel side is proportion to the increase of velocity of flow. 3. When the porosity ratio and the flow speed of the flume tank are fixed, the decrease of the velocity of flow which is passed the upper panel side is proportion to the increase of attack angle. 4. As a result of comparison between the underwater shape by simulation which is applying the reduction ratio of flow speed from the experiment using plane netting and that by model experiment, it was found out that the result of the simulation was very close to that of model gear within ${\pm}$ 5 % error range.

• Journal of fish pathology
• /
• v.18 no.2
• /
• pp.187-195
• /
• 2005

Effluent of aquaculture industry has caused a growing concern regarding its environmental impact. We assessed the use of flounder farming sewage as supplement of diet, to minimize the impact of aquaculture on the environment or also establish the technique for the recycling of effluent sediment derived from land-based seawater fish farm. In order to investigate the effects of a fermented aquaculture waste on biochemical responses of olive flounder (Paralichthys olivaceus), fermented products of aquaculture wastes were used as test compounds that cause hepatic and renal stress through the induction of oxidative stress in liver and kidney. Hepatosomatic index (HSI), glutathione content and glutathione dependent enzyme were not significantly different and no correlation was found within the different types of fermentation condition or supplement concentration, except for significant increases in 50% fermentation group and 50% concentration group in case of glutathione peroxidase activity and HSI value, respectively. These results showed addition of fermented aquaculture sewage may be an economic artificial sources of diet for fish aquaculture practices without affecting the function and safety in view of biochemical examination.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.13 no.5
• /
• pp.73-86
• /
• 2018

Recently, the trend is an increase in prep and existing entrepreneurs returning to farming, people who take over the business and work on a secondary inauguration, and those who are in the field of processed food or exposing farm arisen from the activation of the sixth industry. However, the fact is that majority of an agricultural education is about production process technology education of farm product and processed food under a government-affiliated organization, so the education for start-up, management, or marketing are scarcely proceeding. Rapidly changing customers' demands and trends, agricultural product and food market opening cause a crisis in the field of agrifood. To turn this crisis into opportunity, return farmers need to be fully qualified as an entrepreneur and enterpriser, so that they improve their business mind-set such as plaining, manufacturing and marketing items in a customer perspective, and have ability to take action against imported goods. Also there is a necessary education to change recognition and enhance their ability as an entrepreneur. This study gives a proposal that an agricultural education should expand and strengthen for practician in the field of agrifood to inspire mind-set, change recognition, and enhance their ability as an entrepreneur, and aim at basically figuring out reality of current agricultural education which has not been systematically studied yet, and also establishing theories associated with that. This study is composed of present state, content, drawback, improvement plan of the current agricultural education intended for five of education managers and instructors who provided various education about inception towards farmers, returning farmers, and prep entrepreneurs who have already started up or get ready to do the business in agrifood field.

• Journal of Engineering Education Research
• /
• v.18 no.3
• /
• pp.46-58
• /
• 2015

Informal engineering education program for high school students was developed to cultivate engineering literacy using the human resources and facilities of university. Plant factory, a smart farming technology, was selected as a main theme, and the novel engineering camp program involving engineering design activities and intra-linter-team works was planned. The camp program was applied to 38 high school students in an active learning classroom. Five teams were constructed according to elemental technologies such as biotechnology, information-communication technology, energy engineering, mechanical engineering and architectural engineering, and the students were participated in intra- and inter-team activities to achieve the final goal of 'the construction of a plant factory in school'. The team works were conducted according to the eight steps of engineering design process (identifying the problem and need, identifying criteria and constraints, brainstorming possible solutions, selecting the best possible solution, constructing a prototype, testing and evaluating the solution, communicating the solution, and refining design). Participants' satisfaction survey showed that the satisfaction on the contents of engineering design was 4.48 on 5-point Likert scale. The participants' satisfaction on creative activity and systematic methodology was 4.43 on 5-point Likert scale. 97% of participants responded positively to team works, and 92% of participants were satisfied with career mentoring activity supplied by undergraduate/graduate students. These results indicates that the engineering camp program involving engineering design activity and intra-/inter-team works can contribute to cultivate engineering literacy such as creativity, problem solving ability, collaboration, communication skills for high school students, and to increase their interests in engineering fields.

• Research in Plant Disease
• /
• v.13 no.1
• /
• pp.57-60
• /
• 2007

A rhizopus soft rot caused by Rhizopus stolonifer occurred sporadically on grape in orchard in Gyeongsang-nam-do Agricultural Research and Extension Services and in Wholesale Market of Agricultural Products in Jinju city. The infected fruits were rapidly water-soaked, softened and eventually rotted, and the symptoms were initiated from wounds or cracks occurred at harvest time. Sporangiophores were $850{\sim}1,800{\mu}m$ in length and $12{\sim}23{\mu}m$ in width. Sporangia were globose or hemispheric and $80{\sim}190{\mu}m$ in size. The color of sporangia was white and cottony at first and gradually to brownish black, bearing abundant spores when it matured. Columella were hemispheric and $70{\sim}95{\mu}m$ in size. Sporangiospores were irregular round or oval, brownish-black streaked and $8{\sim}22{\times}6{\sim}10{\mu}m$ in size. The optimum temperature for mycelial growth of the fungus on PDA was 25$^{\circ}C$. On the basis of mycological characteristics and pathogenicity to grape (Vitis vinifera), the causal fungus was identified as Rhizopus stolonifer (Ehrenberg ex. Fr,) Lind. This is the first report of Rhizopus soft rot by R. stolonifer on grape (V. vinifera) in Korea.