• Journal of Advanced Marine Engineering and Technology
• /
• 제34권6호
• /
• pp.792-797
• /
• 2010

가정용 조리기구인 전자레인지는 구동시 필요한 고주파의 형성을 위하여 고전압 발생장치와 고 전압 축전지 등의 장치가 사용된다. 이 장치들은 높은 전압에서 구동되기 때문에 다량의 열에너지를 방출한다. 따라서 방출된 열에너지는 전자레인지 본체의 온도를 상승시키는 요인이 된다. 본 연구에서는 쿨링팬 구동조건과 열에너지 발생조건에 따른 전자레인지 내부의 온도 분포를 해석하였다. 해석결과 쿨링팬에서 유출되는 공기의 속도가 증가함에 따라 내부 온도가 감소하는 것을 확인하였으며 감소하는 정도를 정량적으로 분석하였다. 그리고 열에너지 방출량을 조정하여 내부 온도분포를 조사하였다.

• International Journal of Fluid Machinery and Systems
• /
• 제3권1호
• /
• pp.1-10
• /
• 2010

The present study is a fundamental approach to develop the measuring technology for minute fluctuating pressures on the three-dimensional blade surfaces of the fan which rotates with an arbitrary rotation-axis direction. In this situation, we are required to correct the centrifugal-force effect, the gravitational-force effect and the other leading-error effects for accurate measurements of the minute pressures. The working fluid is air. A pressure transducer rotating with an arbitrary attitude is closely sealed by a twofold shroud system. The rotational motion with an arbitrary attitude is produced by fixing the pressure transducer to the cantilever which is connected to a motor-driven disc of 500mm in diameter and 5mm in thickness. As a result, we have quantitatively determined main governing effects upon the non-effective component of the pressure-transducer signal.

• 한국항공운항학회지
• /
• 제19권4호
• /
• pp.24-29
• /
• 2011

Conceptual study of an open-circuit type low-speed wind tunnel for performance test of wind turbine blade and airfoil is conducted. The tunnel is constituted of a settling chamber, a contraction, closed test section, a diffuser, two corners, a cross leg and a fan and motor. For the performance test, the closed test section width of 1.8 m, height of 1.8 m and length of 5.25 m is selected. The contraction ratio is 9 to 1 and maximum speed in the test section is 67 m/sec. Input power in the tunnel is about 238 kW and its energy ratio is 3.6. The wind tunnel designed in present study will be an effective tool in research and development of wind turbine and airfoil.

• 전력전자학회논문지
• /
• 제21권2호
• /
• pp.144-149
• /
• 2016

This paper presents a power control method of high-speed single-phase BLDC motor. Most electric appliances require a power factor corrector (PFC) to mitigate grid current harmonics. However, the reactive components and power semiconductors in the PFC increase system cost and dimension. In this paper, a new motor drive system for a high-speed single-phase BLDC motor is proposed, which can decrease grid current harmonics without PFC by directly manipulating motor power and eliminating bulky electrolytic dc-link capacitor. Given that the proposed motor power control method does not require motor current controller, no current sensor is necessary. Moreover, the proposed algorithms can be easily implemented using a low-cost micro-controller. The effectiveness of the proposed power control method is verified by experiments.

• 한국통신학회논문지
• /
• 제17권5호
• /
• pp.509-520
• /
• 1992

AIGaAs/GaAs HBT를 이용한 고속 디지틀 시스템에 사용 될 CML OR/NOR 논리게이트를 설계하였다. HBT모델링은 직접 추출법, Gummel-poon모델을 혼합한 형태로 등가회로를 얻었으며 PSPICE를 이용한 시뮬레이션 결과, 전달지연시간이 25ps로써 차단 토글주파수가200Hz에 이르는 초고속 특성을 가지고 기 보고된 HBT의 ECL이나 ME.IFET SCFL에 비하여 noise margin이 커서 입력변동에 비한 잡음에 강하며 fan-out특성이 우수함을 확인하였다.

• 한국해양공학회지
• /
• 제21권6호
• /
• pp.120-124
• /
• 2007

The purpose of this study was to investigate the stability of the arched and fan types of artificial reefs, which provide habitats for shellfish and seaweed. According to the Froude similitude, parameters affecting the stability of the artificial reefs were analytically, experimentally studied. First, the design parameters of the artificial reefs in wave and current fields were presented. Then, using dimensionless parameters, such as the surf similarity parameter and water particle speed, the stability of the arched and fan types of artificial reefs was investigated. From the hydraulic experiments, it is shown that the stability heavily depends on the way the artificial reefs are installed. Therefore, the installation of the artificial reefs on the surf zone should be carefully executed.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2000년도 유체기계 연구개발 발표회 논문집
• /
• pp.99-103
• /
• 2000

This paper describes the development of standard series for turbo blowers. In mass production system, it is very required to standardize blowers to improve the productivity of ordering, estimating, manufacturing. To standardize blowers, we performed researches on the effects of $b_1$(impeller inlet width), $b_2$(impeller outlet width), ${\beta}_1$(blade inlet angle), ${\beta}_2$(blade outlet angle), Z(number of blades) of impellers and geometry of casing experimentally. Through this study, we chose the several best model of turbo blowers with high efficiency and low noise, which represent each specific speed series 63, 80, 100, 125, 160, 200, 250, 315. After the development of such standardized blowers, the test results are used to prepare the fan geometry and performance database for a selection software.

• 한국유체기계학회 논문집
• /
• 제13권3호
• /
• pp.24-29
• /
• 2010

Axial fans for an air-conditioning unit are designed to equip the system with an expected flow-rate and low noise level by applying the blade design method of multi-sectioning and local camber generation. In this study, the distributions of chord length, stagger angle, and camber angle are globally and locally determined for the given specific speed, which is considered to be relatively high. The mock-up fans are observed to satisfy the aerodynamic performance and the noise level for the system simultaneously and discussed in terms of local flow patterns related to the emitted noise.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2006년도 전력전자학술대회 논문집
• /
• pp.175-177
• /
• 2006

최근 네트워크를 이용한 제어 시스템은 기존의 중앙집중식 제어방식을 벗어나 점차 분산형 제어 방식을 이용하고 있다. 이는 흔히 필드 버스라 일컫는 분산형 제어방식이 여러 가지 장점을 가지고 있기 때문이다. 특히 CAN(Controller Area Network)는 차량내의 Wiring Harness의 공간과 중량을 덜 차지하고 Controller 간의 빠르고 안정적이며 내구성이 우수한 차량 내 네트워크 프로토콜로 주로 사용되고 있다. 본 논문에서는 CAN 프로토콜을 이용하여 차량 HVAC FAN의 엑추에이터로 사용되는 DC Motor의 속도 제어를 수행하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 정기총회 및 창립40주년기념 학술대회 학회본부
• /
• pp.362-366
• /
• 1987

The amount of inflowing Air into the boiler has controlled by manipulating the opening of valve, damper and vane, as fan operated by induction motor operats at constant speed, but these control methods are not efficient. Thus VVVf(Variable Voltage Variable Frequency) control of fan has selected to improve efficiency and to acquire power savings. Control system of Air Flow is affected by nonlinearity caused by load variation, vane opening, etc. The analysis of control parameter causing nonlinearity is needed to acquire optimal control and excellent transient response. This paper provides modeling of boiler with various load conditions and vane opening, and analysis of this system.