• Journal of Radiation Protection and Research
• /
• 제44권2호
• /
• pp.64-71
• /
• 2019

Background: It is very difficult to distinguish between a radioactive contamination source and background radiation from natural radionuclides in the marine environment by means of online monitoring system. The objective of this study was to investigate a statistical process for triggering abnormal level of count rate data measured from our on-line seawater radioactivity monitoring. Materials and Methods: Count rate data sets in time series were collected from 9 monitoring posts. All of the count rate data were measured every 15 minutes from the region of interest (ROI) for $^{137}Cs$ ($E_{\gamma}=661.6keV$) on the gamma-ray energy spectrum. The Shewhart ($3{\sigma}$), CUSUM, and Bayesian S-R control chart methods were evaluated and the comparative analysis of determination methods for count rate data was carried out in terms of the false positive incidence rate. All statistical algorithms were developed using R Programming by the authors. Results and Discussion: The $3{\sigma}$, CUSUM, and S-R analyses resulted in the average false positive incidence rate of $0.164{\pm}0.047%$, $0.064{\pm}0.0367%$, and $0.030{\pm}0.018%$, respectively. The S-R method has a lower value than that of the $3{\sigma}$ and CUSUM method, because the Bayesian S-R method use the information to evaluate a posterior distribution, even though the CUSUM control chart accumulate information from recent data points. As the result of comparison between net count rate and gross count rate measured in time series all the year at a monitoring post using the $3{\sigma}$ control charts, the two methods resulted in the false positive incidence rate of 0.142% and 0.219%, respectively. Conclusion: Bayesian S-R and CUSUM control charts are better suited for on-line seawater radioactivity monitoring with an count rate data in time series than $3{\sigma}$ control chart. However, it requires a continuous increasing trend to differentiate between a false positive and actual radioactive contamination. For the determination of count rate, the net count method is better than the gross count method because of relatively a small variation in the data points.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.593-596
• /
• 1999

In this paper, we propose an image retrieval system using the MBCM(Modified Borda Count method) in CME(Combining Multiple Experts). It combines color-, shape- and texture-based retrieval sub-systems. CME method can complementarily combine results of each retrieval system, which uses different features. There are some problems when the Borda count method in pattern recognition is applied to image retrieval. Thus, we propose a modified Borda count method to solve these problems. In the experiment, our method reduces false positive errors and produces better results than that of each retrieval module that uses only one feature.

• 전기전자학회논문지
• /
• 제26권4호
• /
• pp.622-627
• /
• 2022

본 논문에서는 공격 횟수와 공격 유형을 모두 고려하여 차량 내 네트워크에서 해킹을 탐지하는 침입 탐지 시스템의 성능을 개선하는 기법을 제안한다. 침입 탐지 시스템에서 침입을 정상으로 잘못 인식하는 FNR(False Negative Rate)과 정상을 침입으로 잘못 인식하는 FPR(False Positive Rate)은 모두 차량의 안전에 큰 영향을 미친다. 본 논문에서는 일정 홧수 이상 공격으로 탐지된 데이터 프레임을 자동적으로 공격으로 처리하며, 자동 공격으로 판단하는 방법도 공격 유형에 따라 다르게 적용함으로서 FNR과 FPR을 모두 개선하는 침입 탐지 기법을 제안하였다. 시뮬레이션 결과 제안하는 기법은 DoS(Denial of Service) 공격과 Spoofing 공격에서 FNR과 FPR을 효과적으로 개선할 수 있었다.

• 한국정보통신학회논문지
• /
• 제17권6호
• /
• pp.1462-1470
• /
• 2013

본 논문에서는 클러스터 단위로 센서 노드의 키와 그룹키를 생성한 후 분배하는 KGDC(Key Generation and Distribution based on Cluster) 모듈과 이 키를 이용하여 시빌 공격과 웜홀 공격을 탐지할 수 있는 SWAD(Sybil & Wormhole Attack Detection) 모듈로 구성되는 SWAD-KNH(Sybil & Wormhole Attack Detection using Key, Neighbor list and Hop count) 기법을 제안한다. KGDC 모듈은 ECDH 알고리즘, 해시함수, 키 체인 기법을 이용하여 그룹키와 센서 노드의 키들을 생성하고 안전하게 배포한다. SWAD 모듈은 2단계 키 확인절차를 수행함으로써 시빌 공격 탐지를 강화시키고, 근원지와 목적지 노드의 공동이웃노드들의 수와 홉 카운트를 이용하여 웜홀 공격을 탐지한다. 그 결과 SWAD-KNH 기법은 시빌 공격 탐지율은 91.2%, 평균 FPR(False Positive Rate)은 3.82%이고, 그리고 웜홀 공격 탐지율은 90%, 평균 FPR(False Positive Rate)은 4.64%으로 평가되므로 시빌과 웜홀 공격 탐지율 및 시빌과 웜홀 공격 탐지의 신뢰성을 향상시켰다.

• 한국시뮬레이션학회논문지
• /
• 제21권4호
• /
• pp.91-102
• /
• 2012

네트워크 포트스캔 공격은 내부 네트워크에 있는 시스템에서 열려 있는 포트를 알아내기 위한 방법이다. 기존 대부분의 침입탐지시스템(Intrusion Detection System; IDS)들은 단위 시간당 시스템 또는 네트워크에 몇 번의 패킷을 보냈는지의 횟수를 기록하여 전송한 패킷의 횟수가 임계치보다 높은 소스 인터넷 주소(source IP address)에 대해서 포트스캔 공격이 수행되었다고 간주하였다. 즉, 네트워크 포트스캔 공격을 수행한 소스 인터넷 주소에 대한 위험 정도는 IDS들이 기록한 포트스캔 공격횟수에 의존하였다. 그러나 단순히 포트스캔 공격 횟수에 기반을 둔 위험성의 측정은 느린 포트스캔 공격에 대해 거짓 부정(false negative)이 높아져 포트스캔 탐지율이 낮아진다는 문제가 있다. 본 연구에서는 네트워크 포트스캔 공격에 대해 좀 더 정확하고 포괄적인 구분을 하기 위해 4가지 형태의 정보를 요약한다. 포트스캔 공격에 대한 위험성을 집약적으로 나타내기 위하여 주성분분석(principal component analysis, PCA)에 의해 이러한 정보들을 정량화한 위험지수를 제안한다. 실험을 통해 제안한 위험지수를 이용한 탐지가 포트스캔 탐지율에 있어서 Snort보다 우수하다는 것을 보인다.

• 한국의류산업학회지
• /
• 제12권4호
• /
• pp.500-507
• /
• 2010

In this study, physical properties were studied by using latent stretching yarn in order to develop the texturing yarn technique for super bulky yarn, which is better in bulkiness and handle than natural wool and also adds property of synthetic fiber to natural wool. In order to obtain textured conditions by analysing basic properties for manufacturing DTY yarn with super bulky property, DTY 50d/12 after spinning latent yarn spined POY 80d/12 was obtained under the two conditions of (i) false twist(T/M) level 3 in DTY texturing and (ii) draw ratio level 4 in draw texturing. For DTY texturing yarn, Elongation rate increased as the heat treatment time and temperatures increased. In addition, shrinkage became higher as false twist was higher, so that elongation rate became lower. When annealing became longer in time and higher in temperature, initial modulus increased. In addition, as the count of false twist increased, the initial modulus showed higher values. For draw texturing yarn, under the conditions of heat temperature 180 and heating time 30 minutes, shrinkage rate in draw ratio 1.55 and 1.6 draw ratio was 7%, and that in 1.65 and 1.7 draw ratio was 8.5%. High draw ratio samples' tenacity was much influenced by heating time and temperature, but low draw ratio samples' tenacity was influenced not by treated time, but by treated temperature.

• 대한기계학회논문집
• /
• 제16권3호
• /
• pp.547-554
• /
• 1992

본 연구에서는 Climet사의 백색광원 OPC인 CI226와 PMS사의 laser 광원 OPC인 LAS-X 및 HS-LAS의 응답특성을 측정하여 제작사가 제시한 응답특성과 비교하여 그 정 확성을 논하였으며 아울러 고유량(high flow rate) Clean Room용 OPC인 Climet CI- 7300, Met One 200, Hiac/Royco5120 등 3가지 장치에 관한 오계수의 원인을 박히고자 하였다.

• Communications for Statistical Applications and Methods
• /
• 제19권6호
• /
• pp.899-904
• /
• 2012

High-dimensional categorical data models with small sample sizes have not been used extensively in genomic sequences that involve count (or discrete) or purely qualitative responses. A basic task is to identify differentially expressed genes (or positions) among a number of genes. It requires an appropriate test statistics and a corresponding multiple testing procedure so that a multivariate analysis of variance should not be feasible. A family wise error rate(FWER) is not appropriate to test thousands of genes simultaneously in a multiple testing procedure. False discovery rate(FDR) is better than FWER in multiple testing problems. The data from the 2002-2003 SARS epidemic shows that a conventional FDR procedure and a proposed test statistic based on a pseudo-marginal approach with Hamming distance performs better.

• 한국공간정보시스템학회:학술대회논문집
• /
• 한국공간정보시스템학회 2004년도 국내 LBS 기술개발 및 표준화 동향세미나
• /
• pp.69-74
• /
• 2004

Selectivity estimation for spatial query is very important process in finding the most efficient execution plan. Many works have been performed to estimate accurately selectivity. Although they deal with some problems such as false-count, multi-count, they require a large amount of memory to retain accurate selectivity, so they can not get good results in little memory environments such as mobile-based small database. In order to solve this problem, we propose a new technique called MW histogram which is able to compress summary data and get reasonable results. It also has a flexible structure to react dynamic update. The experimental results showed that the MW histogram has lower relative error than MinSkew histogram and gets a good selectivity in little memory.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.766-768
• /
• 2003

Selectivity estimation for spatial query is curial in Spatial Database Management Systems(SDBMS). Many works have been performed to estimate accurate selectivity. Although they deal with some problems such as false-count, multi-count arising from properties of spatial dataset, they can not get such effects in little memory space.* Therefore, we need to compress spatial dataset into little memory. In this paper, we propose a new technique called MW Histogram which is able to compress summary data and get reasonable results. Our method is based on two techniques:(a)MinSkew partitioning algorithm which deal with skewed spatial datasets. efficiently (b) Wavelet transformation which compression effect is proven. We evaluate our method via real datasets. The experimental result shows that the MW Histogram has the ability of providing estimates with low relative error and retaining the similar estimates even if memory space is small.