• 비파괴검사학회지
• /
• 제18권2호
• /
• pp.92-102
• /
• 1998

섬유강화 복합재 연소관은 복합재료의 사용, 필라멘트 와인딩 및 경화공정 등으로 인하여 제작 중 다양한 결함이 발생할 수 있으며, 또한 사용 도중에도 예기치 않은 손상을 받아 기계적 성질이 저하될 수 있다. 따라서 제작 완료된 연소관의 품질 보증을 위해 수압보증시험이 사용되고 있으나 이를 위해 가한 수압이 오히려 연소관에 예기치 않은 손상을 가하여 실제 사용시 그 성능을 저하시키는 요인으로 작용하는 경우도 있다. 이러한 문제를 해결하기 위해 본 연구에서는 수압보증시험시의 음향방출을 감지하여, 그 신호의 특성으로부터 복합재 연소관의 파손 거동을 예측하는 체계적인 기법의 개발을 시도하였다. 음향방출을 이용하여 연소관에 발생한 손상의 개략적 위치를 결정할 수 있었으며, 또한 파괴모드의 식별도 가능하였다. 다만, 시료의 부족으로 최종파열압력의 변화와 충격손상의 영향에 대한 신뢰성 있는 분석은 불가능하였다.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제17권4호
• /
• pp.280-288
• /
• 2017

Purpose: PBA buried in underwater requires high reliability because of its mission critical characteristic and harsh operational environment during its life cycle. Therefore, various reliability improvement activities are necessary. The defect on PBA manufacturing process have been studied, as a result, many activities and standards have been presented. However, there are less studies regarding failure pattern on physical features based on design. In this paper, we studied a possible failure patten based on physical features that is related with manufacturing process of PBA. And reliability improvement design based on PoF (Physical of Failure) were intruduced in this paper. Methods: A reliability prediction simulation were performed on the components A and B of the H system using Sherlock Software which is a PoF commercial tool from DFR solution. Solder fatigue and PTH fatigue analysis based on thermal cycling profiles and random vibration was analyzed on three earthquake response spectrum. Result: It was validated that life time and reliability improvement design through solder fatigue and PTH fatigue analysis in case of component. For compoenet B, random vibration fatigue was additionally analyzed and validated reliability for earthquakes profile. Conclusion: In design stage prior to manufacturing, PoF can be analyzed, and it is possible to make a reliability improvement/validated design using design data. This study can be applied in every design step and contribute to make more stable development product.

• Applied Science and Convergence Technology
• /
• 제24권2호
• /
• pp.27-32
• /
• 2015

We analyzed the destruction patterns of a turbo-molecular pump (TMP) resulting from its sudden exposure of a foreline to the atmospheric pressure due to a destruction of the foreline connecting clamp of an ICP dry etcher for 300 mm wafers during high-vacuum operation ($5{\times}10^{-6}$ Torr). Unlike in the case of view port's breakage, the TMP's rotor module was crashed inside the chamber. The primary damage resulted from the collision of the blades and stators, and the secondary damage resulted from the breaking of the rotor - driving shaft assembly. The fixing screws of the rotor and axial shaft were bent and broken when the TMP controller output the maximum current even after the crash event. Electrical power consumption analysis of the TMP power controller confirmed it. The stress distributions were analyzed by a finite element method using CFD-ACE+ multi physics software. Rotating inertia of each parts and kinetic energies were calculated as well. 68% of the rotational kinetic energy is deposited by the rotor - shaft module.

• Journal of Welding and Joining
• /
• 제32권3호
• /
• pp.74-80
• /
• 2014

Due to environmental regulations (RoHS, WEEE and ELV) of the European Union, electronics and automotive electronics have to eliminate toxic substance from their devices and system. Especially, reliability issue of lead-free solder joint is increasing in car electronics due to ELV (End-of-Life Vehicle) banning from 2016. We have prepared engine control unit (ECU) modules soldered with Sn-40Pb and Sn-3.0Ag-0.5Cu (SAC305) solders, respectively. Degradation characteristics of solder joint strength were compared with various conditions of automobile environment such as cabin and engine room. Thermal cycle test (TC, $-40^{\circ}C$ ~ ($85^{\circ}C$ and $125^{\circ}C$), 1500 cycles) were conducted with automotive company standard. To compare shear strength degradation rate with eutectic and Pb-free solder alloy, we measured shear strength of chip components and its size from cabin and engine ECU modules. Based on the TC test results, finally, we have known the difference of degradation level with solder alloys and use environmental conditions. Solder joints degradation rate of engine room ECU is superior to cabin ECU due to large CTE (coefficient of thermal expansion) mismatch in field condition. Degradation rate of engine room ECU is 50~60% larger than cabin room electronics.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1730-1733
• /
• 2007

As semiconductor and MEMS devices become smaller, testing process during their production should follow such a high density trend. A circuit inspection tool "probe card" makes contact with electrode pads of the device under test (DUT). Nowadays, electrode pads are irregularly arranged and have height difference. In order to absorb variations in the heights of electrode pads and to generate contact loads, contact probes must have some levels of mechanical spring properties. Contact probes must also yield a force to break the surface native oxide layer or contamination layer on the electrodes to make electric contact. In this research, new vertical micro contact probe with bellows shape is developed to overcome shortage of prior work. Especially, novel bellows shape is used to reduce stress concentration in this design and stopper is used to change the stiffness of micro contact probe. Variable stiffness can be one solution to overcome the height difference of electrode pads.

• 센서학회지
• /
• 제28권6호
• /
• pp.371-376
• /
• 2019

We have developed an acoustic resonance inspection system to inspect the welding defects in the mechanical parts fabricated using friction stir welding method. The inspection system was consisted of a DAQ board, a microphone sensor, an impact hammer, and controlled by a PC software. The system was developed to collect and analyze the sound signal generated by hitting the sample with an impact hammer to determine whether it is defective. In this study, 100% welded good samples were compared with 95%, 90%, and 85% welded samples, respectively. The variation of the completeness in welding did not affect the visual appearance in the samples. As a result of analyzing the natural frequencies of the good samples, the five natural frequency peaks were identified. In the case of the defective samples, the frequency change was observed. The welding failure detection time was fast enough to be only 0.7 seconds. Employing our welding defect inspection system to the actual industrial field will maximize the efficiency of quality inspection and thus improve the productivity.

• 센서학회지
• /
• 제25권2호
• /
• pp.155-159
• /
• 2016

In this work, we have developed a test system to examine whether the charge indicator of the plug-in hybrid electric vehicle (PHEV) works properly or not. In PHEV, the driver should charge the necessary electricity by plugging in manually and be able to know the charging status through the charge indicator conveniently located for the charging individual. Our system used the CAN bus to transmit the same commands from ECU to the indicator to test the proper operation of the indicator lights. It measured the electric current values during operation and analyzed to determine the quality of the indicators. The inspection items included the proper packaging, the electrical shorts, the LED lighting during charging, the LED lighting for charging failure, and the LED lighting when errors occur. We developed the system for the operators in the factory allowing them to approve the test results at the site. We developed the hardware, the control software, and the software to store the test results and the history of the products in the database. Serial numbers were given to the good quality products and the bar code labels were printed to trace the products afterwards. Through this work, we developed a system to inspect the electric parts in real time upon fabrication. We are planning to further improve our system to inspect the brightness of the indicator by adding the vision inspection in future.

• Composites Research
• /
• 제32권1호
• /
• pp.50-55
• /
• 2019

본 연구에서는 생체모방 섬유강화 복합재에서 섬유의 나선형 구조의 배열이 복합재의 기계적 물성에 미치는 영향을 연구하였다. 유한요소해석을 이용해 원형의 생체모방 섬유강화 복합재를 구성하였고, 다양한 크기의 압력하중을 복합재 면에 적용시켜 굽힘과 파괴 거동의 결과를 분석하였다. 섬유의 정렬 방향에 따라 파괴 형상이 다르게 나타났고, 복합재에서 섬유의 나선형 구조 배열이 압력하중하에서 복합재의 굽힘 파괴강도를 크게 향상시키는 것으로 나타났다. 이는 섬유가 각 층별로 여러 방향으로 정렬되어 외부하중에 의한 파괴에너지가 여러방향으로 분산되는 것에서 기인한다.

• Steel and Composite Structures
• /
• 제43권1호
• /
• pp.19-30
• /
• 2022

The static strength and fatigue crack resistance of the aircraft skin structures depend on the materials used and joint type. Most of the commercial aircraft's skin panel structures are made from aluminium alloy and carbon fibre reinforced epoxy. In this study, the fatigue resistance of four joint configurations (metal/metal, metal/composite, composite/composite and composite/metal) with riveted, adhesive bonded, and hybrid joining techniques are investigated with experiments and finite element analysis. The fatigue tests were tension-tension because of the typical nature of the loads on aircraft skin panels susceptible of experimenting fatigue. Experiment results suggest that the fatigue life of hybrid joints is superior to adhesive bonded joints, and these in turn much better than conventional riveted joints. Thanks to the fact that, for hybrid joints, the adhesive bond provides better load distribution and ensures load-carrying capacity in the event of premature adhesive failure while rivets induce compressive residual stresses in the joint. Results from FE tool ABAQUS analysis for adhesive bonded and hybrid joints agrees with the experiments. From the analysis, the energy release rate for adhesive bonded joints is higher than that of hybrid joints in both opening (mode I) and shear direction (mode II). Most joints show higher energy release rate in mode II. This indicates that the joints experience fatigue crack in the shear direction, which is responsible for crack opening.

• 대한기계학회논문집A
• /
• 제36권5호
• /
• pp.523-528
• /
• 2012

이동용 전자기기에 적용 가능한 유연성 전자모듈이 롤투롤 공정에 의해 개발되었다. 개발된 전자 모듈은 최 외곽의 두 폴리이미드 층과 그 사이의 동선과 이방성도전필름과 박막 실리콘 칩과 모듈의 봉지재 역할을 하는 접착재료로 구성된다. 개발된 유연성 전자모듈의 신뢰성을 평가하기 위하여 열충격시험, 고온고습 시험, 오토클레이브 시험을 수행하였다. 시험수행 결과 두 시험에서는 문제가 발생하지 않았으나, 오토클레이브 시험에서는 대부분의 시편 모듈 내에 박리가 발생하였다. 발생한 박리의 고장 메커니즘을 연구하기 위하여 봉지재의 흡습 관련 물성치를 실험적으로 분석하고 오토클레이브 시험조건에서의 모듈 내 습기확산과정을 범용 유한요소 프로그램을 이용하여 분석하였다. 해석결과로부터 오토클레이브 시험조건에서 모듈 내에 발생하는 습기확산과정을 밝혀낼 수 있었다.