• Progress in Superconductivity and Cryogenics
• /
• v.15 no.4
• /
• pp.6-9
• /
• 2013

Korea Superconducting Tokamak Advanced Research (KSTAR) has a helium refrigeration system (HRS) with the cooling capacity of 9 kW at 4.5 K. Main cold components are composed of 300 tons of superconducting (SC) magnets, main cryostat thermal shields, and SC current feeder system. The HRS comprises six gas storage tanks, a liquid nitrogen tank, the room temperature compression sector, the cold box (C/B), the 1st stage helium distribution box (DB#1), the PLC base local control system interconnected to central control tower and so on. Between HRS and cold components, there's another distribution box (DB#2) nearby the KSTAR device. The entire KSTAR device was constructed in 2007 and has been operated since 2008. This paper will present the maintenance result of the KSTAR HRS during the campaign and discuss the operation record and maintenance history of the KSTAR HRS.

• Laser Solutions
• /
• v.7 no.3
• /
• pp.25-36
• /
• 2004

This study was performed to clarification of the formation of weld discontinuities in the dissimilar laser fusion zone. Welding parameters were beam power of 1300, 1430, 1560, and 1700 W and travel speed of 1, 1.3, and 1.7 m/min. Most cavities in the fusion zone were observed near the tip. Cavities in the fusion zone observed to be formed and grown from pores in the tip. More cavities were formed as the beam position moves to the tip side. Small cavities were decreased but large cavities were increased when the energy input increased. W content in the fusion zone was increased with heat input and as the beam position close to the tip. In the fusion zone, W content in the dendrite boundary was increased with heat input. Considering the propagation path and fracture morphology, cracks were solidification cracking, and were initiated and propagated along the dendrite boundaries. The formation of cracks might be related with the W rich ${\mu}$ phase which was formed in the grain boundaries and dendrite boundaries.

• Korean Journal of Microbiology
• /
• v.37 no.4
• /
• pp.312-316
• /
• 2001

To improve the ethanol fermentability, four Saccharomyces yeast strains with efficient ethanol fermentability were subjected to rare-mating and protoplast fusion. Using these 4 strains, 5 different combinations of mating-pair or fusion-pair were constructed and their hybrids or fusants were obtained. From the statistical analysis of the results of the ethanol fermentation by the hybrids of the different mating-pair or fusion-pair, no difference was found in ethanol production, but [S. kluveri $khl{\times}S$ cerevisiae cp3] pair was shown to be the best combination which can produce high cell-viability. In fact, the clone No. 3 of the [S. kluveri $khl{\times}S$ cerevisiae cp3] pair was selected as the best strain which produced ethanol of 10.11% (w/v) or 12.81% (v/v) from 25% (w/v) glucose at $33^{\circ}C$ for 3 days with the residual sugar of 3.53% (w/v), viability of 62.65%, fermentation efficiency of 92.2%.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2005.05a
• /
• pp.1092-1093
• /
• 2005

• Proceedings of the KIPE Conference
• /
• 2018.11a
• /
• pp.111-112
• /
• 2018

4Quadrant 동작하는 ITER CS, VS1, CC AC/DC Converter Local Controller는 전압제어 모드로 동작하며 초전도 코일에 제어된 전류를 충전, 유지, 방전하며 제어기 내외부 조건에 의한 보호 동작이 요구된다. 코일 전류가 제로 영역에 있을 때 플라즈마 붕괘로 인한 코일 전류 blocking을 방지하기 위한 순환전류 모드가 요구 되며 코일 전류에 따른 컨버터 브릿지의 동작모드가 결정된다. 본 논문은 RTDS를 이용하여 제어기의 성능을 검증한 내용을 논의하고자 한다.

• Proceedings of the KIPE Conference
• /
• 2018.11a
• /
• pp.113-114
• /
• 2018

ITER TF AC/DC Converter는 2Quadrant 동작하며 컨버터 변압기의 무부하 Tap chage position에 따라 출력 전압은 ${\pm}160V/68000A$, ${\pm}650V/68000A$ 2가지 출력 사양으로 동작한다. TF Local Controller는 2상한 동작과 변압기 Tap change 제어에서 높은 신뢰도를 요구 한다. 본 논문은 RTDS를 이용하여 TF 컨버터 제어기의 성능을 검증한 내용을 논의하고자 한다.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.19 no.4
• /
• pp.169-185
• /
• 2016

Recently mean stand height has been added as new attribute to forest type maps, but it is often too costly and time consuming to manually measure 9,100,000 points from countrywide stereo aerial photos. In addition, tree heights are frequently measured around tombs and forest edges, which are poor representations of the interior tree stand. This work proposes an estimation of mean stand height using an image-based point cloud, which was extracted from stereo aerial photo with FUSION S/W. Then, a digital terrain model was created by filtering the DSM point cloud and subtracting the DTM from DSM, resulting in nDSM, which represents object heights (buildings, trees, etc.). The RMSE was calculated to compare differences in tree heights between those observed and extracted from the nDSM. The resulting RMSE of average total plot height was 0.96 m. Individual tree heights of the whole study site area were extracted using the USDA Forest Service's FUSION S/W. Finally, mean stand height was produced by averaging individual tree heights in a stand polygon of the forest type map. In order to automate the mean stand height extraction using photogrammetric methods, a module was developed as an ArcGIS add-in toolbox.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2005.05a
• /
• pp.1078-1079
• /
• 2005

• Proceedings of the KIPE Conference
• /
• 2016.11a
• /
• pp.188-189
• /
• 2016

ITER AC/DC Converter Local Controller는 플라즈마 제어 시스템에서 요구하는 전압 전류 명령에 따라 초전도 코일에 전류를 공급하고 컨버터 System 자체 보호 기능, 초전도 코일시스템 이상 시 Bypass 및 코일 에너지를 계통에 회생하여 에너지를 방전하여야 한다. 코일 별로 플라즈마 제어에 필요한 높은 전압 전류는 전원 장치의 직렬 접속이 요구되고(2직렬, 4직렬, 6직렬) 제어적으로 이들 제어 시스템들은 신뢰도가 높은 디지털 설계를 요구 한다. 본 논문은 다 직렬 전원 장치 제어를 위한 Local Controller의 설계 내용을 논의하고자 한다.

• Proceedings of the KIPE Conference
• /
• 2017.11a
• /
• pp.203-204
• /
• 2017

ITER AC/DC Converter Local Controller는 ITER 토카막 초전도 코일 전류를 제어하는 것으로 코일 전류 충전, 유지, 방전 및 보호 동작이 요구되며 토카막 제어실에서 Real time 통신으로 명령되는 실시간 전압 명령을 추종해야 한다. 대용량 Utility 및 대전류 초전도 코일 실부하에서 제어기 개발 시험은 불가능하므로 RTDS를 이용하여 제어기의 성능을 검증할 수 있다. 본 논문은 RTDS를 이용하여 전원 장치 제어기의 시험 된 내용을 논의 하고자 한다.