• 제목/요약/키워드: FT-NMR

검색결과 534건 처리시간 0.026초

Non-monotonic Size Dependence of Electron Mobility in Indium Oxide Nanocrystals Thin Film Transistor

  • Pham, Hien Thu;Jeong, Hyun-Dam
    • Bulletin of the Korean Chemical Society
    • /
    • 제35권8호
    • /
    • pp.2505-2511
    • /
    • 2014
  • Indium oxide nanocrystals ($In_2O_3$ NCs) with sizes of 5.5 nm-10 nm were synthesized by hot injection of the mixture precursors, indium acetate and oleic acid, into alcohol solution (1-octadecanol and 1-octadecence mixture). Field emission transmission electron microscopy (FE-TEM), High resolution X-Ray diffraction (X-ray), Nuclear magnetic resonance (NMR), and Fourier transform infrared spectroscopy (FT-IR) were employed to investigate the size, surface molecular structure, and crystallinity of the synthesized $In_2O_3$ NCs. When covered by oleic acid as a capping group, the $In_2O_3$ NCs had a high crystallinity with a cubic structure, demonstrating a narrow size distribution. A high mobility of $2.51cm^2/V{\cdot}s$ and an on/off current ratio of about $1.0{\times}10^3$ were observed with an $In_2O_3$ NCs thin film transistor (TFT) device, where the channel layer of $In_2O_3$ NCs thin films were formed by a solution process of spin coating, cured at a relatively low temperature, $350^{\circ}C$. A size-dependent, non-monotonic trend on electron mobility was distinctly observed: the electron mobility increased from $0.43cm^2/V{\cdot}s$ for NCs with a 5.5 nm diameter to $2.51cm^2/V{\cdot}s$ for NCs with a diameter of 7.1 nm, and then decreased for NCs larger than 7.1 nm. This phenomenon is clearly explained by the combination of a smaller number of hops, a decrease in charging energy, and a decrease in electronic coupling with the increasing NC size, where the crossover diameter is estimated to be 7.1 nm. The decrease in electronic coupling proved to be the decisive factor giving rise to the decrease in the mobility associated with increasing size in the larger NCs above the crossover diameter.

Subphthalocyanine 화합물 유도체들의 합성 및 특성 비교 (Synthesis of Subphthalocyanine Compound Derivatives and Their Properties)

  • 김재환;허진;이윤이;김보현;이근대;홍성수;박성수
    • 공업화학
    • /
    • 제20권1호
    • /
    • pp.46-51
    • /
    • 2009
  • 본 연구에서는 중간체인 여러 종류의 전구체를 사용하여 치환기의 종류와 위치가 상이한 subphthalocyanine (SubPc) 유도체를 성공적으로 합성하였다. 중간체 및 최종 생성물의 화학적 구조는 핵자기 공명 분광기 및 푸레어 변환 적외선 분광기를 이용하여 확인하였다. 또한, 분광학적 특성 및 결정상 특성은 자외선-가시광 분광기 및 XRD를 이용하여 측정 분석하였다. 합성한 SubPc 유도체들은 각각 560~600 nm 사이의 가시광을 선택적으로 흡수하였고, 치환기가 도입되면 용해도가 향상되었고, 치환기의 종류 및 위치에 따라 최대 흡수파장이 장파장 혹은 단파장으로 이동하였다.

Hybrid LED용 적색 유기형광체의 합성 및 특성 연구 (Synthesis and Characterization of Red Organic Phosphor for Hybrid LED)

  • 이승민;정연태
    • 한국전기전자재료학회논문지
    • /
    • 제30권1호
    • /
    • pp.48-53
    • /
    • 2017
  • We report the studies on the red organic phosphor by using perylene bisimide derivatives. Even though perylene bisimide derivatives have excellent thermal stability and luminous efficiency, they have low solubility in organic solvents. In this research, modified perylene bisimide derivative, N,N'-Bis(4-bromo-2, 6-diisopropylphenyl)-1, 6, 7, 12-tetraphenoxyperylene-3, 4, 9, 10-tetracarboxyl bisimide (1C), has been prepared by the reaction of phenol with N,N'-Bis(4-bromo-2, 6-diisopropylphenyl)-1, 6, 7, 12-tetrachloroperylene-3, 4, 9, 10-tetracarboxyl bisimide (1B) in presence of DMF, at $70^{\circ}C$. The synthesized (1C) was characterized by using $^1H-NMR$, FT-IR, UV/V is spectroscopy, and TGA. The absorbtion and emission of (1C) was shown at 576 nm and 610 nm in UV/V is spectrum. In TGA thermogram, (1C) showed good thermal stability without significant weight loss to $220^{\circ}C$. And in the solubility analysis, (1C) with phenoxy group showed the good solubility in general organic solvents. The blended films of (1C) with PMMA (polymethyl methacrylate) at different weight % concentration such as 10, 5, 1 weight % have been prepared. The blended film was shown at 616 nm when monitored at 450 nm in PL emission spectra.

Opuntia ficus-indica 다당 A-1의 특성 및 알코올유도 간 산화스트레스의 보호 효과 (Characterization of polysaccharide A-1 from Opuntia ficus-indica and it's protection effect on alcoholic induced hepatic oxidative stress)

  • 류일환;권지웅;이어진;윤용갑;권태오
    • 대한한의학방제학회지
    • /
    • 제17권2호
    • /
    • pp.163-174
    • /
    • 2009
  • Reactive oxygen species(ROS) can induce hepatotoxicity and trigger apoptosis in the liver. In this study, we investigated the sulfated polysaccharide A-1 from Opuntia ficus-indica against alcoholic oxidative stress in human liver Hep G2 cell. An antioxidant substance A-1 obtained from the enzymatic extract of Opuntia ficus-indica fruit was purified by DEAE-cellulose ion exchange and sephadex G-100 gel permeation chromatography. The purification yield and molecular weight were 14.3% and 1.8 KDa, respectively. The A-1 predominately contained arabinose, galactose, rhamnose and also sulfate group. The structure of A-1 was investigated by periodate oxidation, FT-IR spectroscopy, $^1H$-NMR spectroscopy. The A-1 mainly composed of alternating unit of ${\rightarrow}4$)-$\alpha$-L- Rapp-2-$SO_3^-$-$\alpha$-L-Galp-($1{\rightarrow}$ and branched linkage of $\beta$-D-Arbp- ($5{\rightarrow}$. The antioxidative activity was measured using the SOD, CAT activity and GSH assay, respectively. The expression of Nrf2 protein was analyzed by western blotting. The viable cell count analyzed by autofluorescence. Oxidative stress induced by ethanol(1 M) were dramatically reduced by A-1 treatment. A-1 also prevented cell death induced by oxidative stress. It also increased expression Nrf2 protein level. We concluded that sulfated polysaccharide A-1 from Opuntia ficus-indica effectively protect Hep G2 liver cell from alcoholic oxidative stress.

  • PDF

Donor-Acceptor 발색단과 디케토피롤로피롤(DPP) 유도체에 관한 연구 (The Study of Donor-Acceptor Chromophores and Diketopyrrolopyrrole(DPP) Analogues)

  • 김헌수;김승회;박수열
    • Tribology and Lubricants
    • /
    • 제32권5호
    • /
    • pp.141-146
    • /
    • 2016
  • The diketopyrrolopyrrole (DPP) pigment is a bicyclic 8-π-electron system containing two lactam units. Typical DPP derivative pigments have melting points of over 350°C and very low solubility in most solvents, and show absorption in the visible region with a molar extinction coefficient of 33,000 dm2mol−1 and strong photoluminescence with maxima in the range 500–600 nm. X-ray structure analyses of DPP show that the whole molecule is almost in one plane. The phenyl rings are twisted out of the heterocyclic plane and the intermolecular hydrogen bonding between neighboring lactam NH and carbonyl units influences the structure of the DPP pigment in the solid state. In this study, mono-N-alkylation and mono-N-arylation were undertaken for Pigment Red 264 or Pigment Orange 73 with alkyl halide and aryl halide, respectively, in the presence of sodium tert-butoxide as a base catalyst to improve the solubility of DPP pigments and their application as CO2 indicators. The synthetic yield was in the range 11–88%. The indicator dyes are highly soluble in organic solvents and shows pH-dependent absorption (λmax 501 and 572 nm for the protonated and deprotonated forms, respectively) and emission (λmax 524 and 605 nm for the protonated and deprotonated forms, respectively) spectra. The mono-N-alkylated and mono-N-arylated DPP pigment was identified by 1H-NMR (1H-Nuclear Magnetic Resonance Spectrometer), FT-IR (Fourier Transform Infrared Spectroscopy), and MS (Mass Spectrometry). According to the results of color and hue properties obtained by a color matching analyzer, the synthesized DPP pigment material can be used as a CO2 indicator.

Characterization of by-products from organosolv pretreatments of yellow poplar wood (Liriodendron tulipifera) in the presence of acid and alkali catalysts

  • 곽기섭;구본욱;박나현;정한섭;최준원;여환명;최인규
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2009년도 추계학술대회 논문집
    • /
    • pp.520-520
    • /
    • 2009
  • Organic by-products derived from cellulose and lignin during organosolv pretreatments of yellow poplar wood (Liriodendron tulipifera) in the presence of $H_2SO_4$ and NaOH as catalysts, respectively, were subjected to various analyses to elucidate their effects on further performance of biological ethanol fermentation and provide preliminary data for the structure and utilization of organosolv lignin. Monomeric sugars amounted to ca. 2.2-7.7% in the organosoluble fraction of the organosolv pretreatment with $H_2SO_4$, while significantly low amount of sugars (0.2-0.3%) were determined in that of the organosolv pretreatment with NaOH. In case of addition of $H_2SO_4$ during organosolv pretreatment of biomass, a fermentation of the organosoluble fraction could be considered as an essential process to increase an efficiency of biomass utilization as well as yield of bioethanol. Precipitates, insoluble by-products in the solvent mixture, were also cficiency oed by diverse analytical methods and revealed that these were typically composed of a lignin moiety regardless of catalyst. According to the results of nuclear magnetic resonance (NMR), Fourier Tcinsform Infrared Spectroscopy (FT-IR) and Gel permeation chromatograp r (GPC), the main components of precipitates seem to be lignin polymers. However, their structures could be slightly modified during pretreatment and mixed with some carbohydrates by chemical bonds and/or physical associations.

  • PDF

Bis(dithiobenzil) 금속 화합물의 합성 및 광안정성 (Synthesis of Bis(dithiobenzil) Metal Complex and Its Photostability)

  • 이근대;박나이;전승엽;허진;손대희;황태경;박성수
    • 공업화학
    • /
    • 제18권5호
    • /
    • pp.433-437
    • /
    • 2007
  • 본 연구에서는 기능성 근적외선 흡수색소 및 광안정제로 사용되는 bis(dithiobenzil) 금속 화합물은 중간체인 benzoin 및 anisoin을 먼저 합성하고 이들을 전구체로 사용하여 합성하였다. 또한, bis(dithiobenzil) 금속 화합물의 광안정성 효과를 확인하기 위하여 전하발생재료인 squarylium을 합성하였다. 중간체 및 최종 생성물의 구조는 핵자기 공명 분석기와 적외선 분광기를 이용하여 확인하였고, 열적 특성은 시차열분석기 및 열중량분석기를 이용하여 분석하였다. 광학 특성과 광안정성 효과는 UV-Vis-NIR 분광기를 이용하여 측정 분석하였다. 합성한 bis(dithiobenzil) 금속 화합물은 근적외선 영역에서 우수한 흡광특성을 나타내었고, 치환기의 종류 및 위치에 따라 최대흡수파장이 이동하였다. 또한, squarylium에 bis(dithiobenzil) 금속 화합물을 첨가하면 squarylium의 광퇴색현상을 감소시켰다.

In situ Gel Forming Stereocomplex Composed of Four-Arm PEG-PDLA and PEG-PLLA Block Copolymers

  • Jun, Yeo-Jin;Park, Kyung-Min;Joung, Yoon-Ki;Park, Ki-Dong;Lee, Seung-Jin
    • Macromolecular Research
    • /
    • 제16권8호
    • /
    • pp.704-710
    • /
    • 2008
  • Injectable hydrogels are quite promising materials due to their potential to minimize invasive implantation and this provides versatile fitness irrespective of the damaged regions and facilitates the incorporation of bioactive agents or cells. In situ gel formation through stereocomplex formation is a promising candidate for injectable hydrogels. In this paper, a new series of enantiomeric, four-arm, PEG-PLA block copolymers and their stereocomplexed hydrogels were prepared by bulk ring-opening polymerization of D-lactide and L-lactide, respectively, with stannous octoate as a catalyst. The prepared polymers were characterized by $^1H$ nuclear magnetic resonance (NMR) spectroscopy, Fourier-transform infrared (FT IR) spectroscopy, gel permeation chromatography (GPC) and thermal gravitational analysis (TGA), confirming the tailored structure and chain lengths. The swelling and degradation behavior of the hydrogels formed from a selected copolymer series were observed in different concentrations. The degradation rate decreased with increasing polymer content in the solution. The rheological behavior indicated that the prepared hydrogel underwent in situ gelation and had favorable mechanical strength. In addition, its feasibility as an injectable scaffold was evaluated using a media dependence test for cell culture. A Tris solution was more favorable for in situ gel formation than PBS and DMEM solutions were. These results demonstrated the in situ formation of hydrogel through the construction of a stereocomplex with enantiomeric, 4-arm, PEG-PLA copolymers. Overall, enantiomeric, 4-arm, PEG-PLA copolymers are a new species of stereocomplexed hydrogels that are suitable for further research into injectable hydrogels.

The Isolation and Antioxidative Effects of Vitexin from Acer palmatum

  • Kim Jin Hwa;Lee Bum Chun;Kim Jin Hui;Sim Gwan Sub;Lee Dong Hwan;Lee Kyung Eun;Yun Yeo Pyo;Pyo Hyeong Bae
    • Archives of Pharmacal Research
    • /
    • 제28권2호
    • /
    • pp.195-202
    • /
    • 2005
  • Free radicals and reactive oxygen species (ROS) caused by UV exposure or other environmental factors are critical players in cellular damage and aging. In order to develop a new antiphotoaging agent, this work focused on the antioxidant effects of the extract of tinged autumnal leaves of Acer palmatum. One compound was isolated from an ethyl acetate soluble fraction of the A. palmatum extract using silica gel column chromatography. The chemical structure was identified as apigenin-8-C-beta-D-glucopyranoside, more commonly known as vitexin, by spectral analysis including LC-MS, FT-IR, UV, $^{1}H-$, and $^{13}C-NMR$. The biological activities of vitexin were investigated for the potential application of its anti-aging effects in the cosmetic field. Vitexin inhibited superoxide radicals by about $70\%$ at a concentration of $100\;{\mu}g/mL$ and 1,1-diphenyl-2-picrylhydrazyl (DPPH) radicals by about $60\%$ at a concentration of $100\;{\mu}g/mL$. Intracellular ROS scavenging activity was indicated by increases in dichlorofluorescein (DCF) fluorescence upon exposure to UVB $20\;mJ/cm^2$ in cultured human dermal fibroblasts (HDFs) after the treatment of vitexin. The results show that oxidation of 5-(6-)chloromethyl-2',7'-dichlo-rodihydrofluorescein diacetate ($CM-H_{2}DCFDA$) is inhibited by vitexin effectively and that vitexin has a potent free radical scavenging activity in UVB-irradiated HDFs. In ROS imaging using a confocal microscope we visualized DCF fluorescence in HDFs directly. In conclusion, our findings suggest that vitexin can be effectively used for the prevention of UV-induced adverse skin reactions such as free radical production and skin cell damage.

PEMFC용 고분자 전해질 막을 위한 BFBN을 포함한 sulfonated poly(ether sulfone)s의 합성 및 특성 (Preparation and Properties of Sulfonated Poly(ether Sulfone)s Containing BFBN for PEMFC)

  • 임영돈;서동완;이현철;진현미;후세인;정인석;김환기
    • 한국수소및신에너지학회논문집
    • /
    • 제22권5호
    • /
    • pp.579-584
    • /
    • 2011
  • Sulfonated poly (ether sulfone)s containing BFBN were prepared from 2,3-bis(4-fluorophenyl)-2-butenedinitrile , 4,4-sulfonyldiphenol and sulfonated 4,4'-difluorodiphenylsulfone sodium salt using potassium carbonate, and followed acidification reaction with 1M $H_2SO_4$. BFBN was prepared from 4-fluorobenzylcyanide, $CCl_4$, NaOH using trimethylbenzylammoniumchloride . Sulfonated poly(ether sulfone)s containing BFBN were studied by FT-IR, $^1H$-NMR spectroscopy, and thermo gravimetric analysis (TGA). The water uptake of synthesized S-PBFBN membranes exhibit 31~62% compared with 28% of Nafion 211. The S-PBFBN membranes exhibit proton conductivities ($80^{\circ}C$, RH 100) of 53.8~117.4 mS/cm compared with 137.4 mS/cm of Nafion 211.