• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.359-360
• /
• 2006

Recently, a lot of work and interest has been devoted to the development of multiaxial fatigue parameters for fretting fatigue life prediction. Many of these parameters have been reviewed in the literature for simple geometries like a cylinder-on-flat contact configuration. The purpose of this study was to estimate fretting fatigue life using critical plane approach which is one of the multiaxial fatigue theories.

• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.4 s.193
• /
• pp.123-130
• /
• 2007

Recently, a lot of work and interest have been devoted to the development of multiaxial fatigue parameters for fretting fatigue life prediction. In this study, the fretting fatigue lift and critical location ware estimated and evaluated through the multiaxial fatigue theories in a cylinder-on-flat contact configuration far Cr-Mo steel, SCM420, the material commonly is used in gears of the automobile and rollers of the conveyor. The strain-life curve was obtained from fatigue test for SCM420. The Fretting fatigue life and critical location were estimated through stress distributions, SWT-parameters and FS-parameters obtained from FEA. This paper showed possibility of applying multiaxial fatigue theories to fretting fatigue lift prediction comparing predicted life with experimental results.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.2
• /
• pp.127-136
• /
• 2008

This paper proposes the efficient system for automatic design of FSS(Frequency Selective Surface) with periodic pattern and frequency characteristics specified by operator. The proposed system derives optimal design parameters through tool for analysis of FSS with arbitrary pattern, DB(Data Base) implemented from limited simulation and measurement data of FSS, and GA(Genetic Algorithm) for optimizing design parameters. FSS analysis tool consists of two analysis tools. One is the simulator for analysis of monolayer FSS that using moment method, another is the tool with approximated analysis method of FSS with dielectric layer. Given pattern configuration and characteristics specified by operators, the DB system searches the best matching FSS, and provides initial genes to GA from the searched parameters, which drastically reduces running time of GA for finding the FSS design parameters. In this paper, the proposed design system is verified through simulation and measurement about FSS with various patterns.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2003.05b
• /
• pp.205-206
• /
• 2003

대기중의 에어로졸은 지구-대기 시스템에 직접효과(direct effect)와 간접효과(inderect effec)로 불리우는 복사효과를 나타내어 지구복사수지에 영향을 미치는 인자이다. 또한 대기중에서 비교적 짧은 체류시간과 공간적인 변화성으로 인하여 제역적인 효과가 매우 크게 일어남에도 불구하고 그 효과가 정확히 알려져 있지 않다 (IPCC, 200l). 따라서 지역적인 규모의 에어로졸의 복사특성 관측이 중요한 요소가 되었다. 이러한 연구의 일환으로 수행된 일련의 프로젝트들은 TARFOX(Tropospheric Aerosol Radiative Forcing Obserational Experiment; Russel et al., 1999). (중략)

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.4
• /
• pp.210-213
• /
• 2017

In this paper, we analyzed the structural design and electrical characteristics of a 3.3 kV super junction FS IGBT as a next generation power device. The device parameters were extracted by design and process simulation. To obtain optimal breakdown voltage, we researched the breakdown characteristics. Initially, we confirmed that the breakdown voltage decreased as trench depth increased. We analyzed the breakdown voltage according to p pillar dose. As a result of the experiment, we confirmed that the breakdown voltage increased as p pillar dose increased. To obtain more than 3.3 kV, the p pillar dose was $5{\times}10^{13}cm^{-2}$, and the epi layer resistance was $140{\Omega}$. We extracted design and process parameters considering the on state voltage drop.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.4 s.346
• /
• pp.58-66
• /
• 2006

This paper proposes an FSS(Frequency Selective Surface) design system that automatically derives design parameters minimally specified by engineers. The proposed system derives optimal design parameters through theory of electromagnetic scattering on FSS, database implemented from real data obtained from practically manufactured FSS, and GA(Genetic Algorithm) for optimizing design parameters. The system, at the first step, searches the best matching FSS within preconstructed DB with given characteristics specified by operators, and then sets initial genes from the searched FSS parameters. GA iterates the optimization process until the system finds the FSS design parameters that matches the characteristics specified by operators. The theory for the electromagnetic scattering on FSS is verified by comparing the simulation results with real data obtained by measuring system composed of horn antenna and receiver. The process for manufacturing the FSS is also included in the paper.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.6 s.237
• /
• pp.815-821
• /
• 2005

Biaxial low cycle fatigue test was carried out to predict fatigue life under combined axial-torsional-loading condition which is that of in-phase and out-of-phase for CF8M cast stainless steels. Fatemi-Socie(FS) parameter which is based on critical plane approach is not only one of methods but also the best method that can predict fatigue life under biaxial loading condition. But the result showed that, biaxial fatigue life prediction by using FS parameter with several different parameters for the CF8M cast stainless steels is not conservative but best results. So in this present research, we proposed new fatigue life prediction parameter considering effective shear stress instead of FS parameter which considers the maximum normal stress acting on maximum shear strain and its effectiveness was verified.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.2A
• /
• pp.181-186
• /
• 2004

Analysis on sharing between GSO FSS and terrestrial system in the 40㎓ band, related with the problem for sharing between terrestrial services and FSS and identification of HDFSS downlink bands in World Radiocommunication Conference 2003, was practiced by assuming that both systems are operated in Korea. According to results from simulation using the characteristic parameters of GSO FSS and terrestrial FS system in 40 ㎓ described in ITU-R Recommendations, in case that elevation and azimuth angle of antenna of FS station are adjusted to point directly to the geostationary satellite, the GSO system can cause the worst interference to the FS system. This situation is possible to occur in the installation of 40 GHz FS station in urban area where there are high-rise buildings. If high-density FS stations in 40 ㎓ band are operated in the future, interference mitigation techniques to avoid GSO arc should be considered.

• Korean Journal of Optics and Photonics
• /
• v.16 no.6
• /
• pp.490-493
• /
• 2005

We have experimentally studied supercontinuum generation in a photonic crystal fiber as a function of pump wavelength and intensity with 100 fs pulsewidth. A supercontinuum over 750 nm spectral width with amplitude variation less than 10 dB has been achieved. It was generated by coupling femtosecond pulses from a mode-locked Ti:Sapphire laser into a 2 m long photonic crystal fiber. Adjusting the parameters of the pump source, it was also possible to control different spectral features of the supercontinuum radiation.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2011.11a
• /
• pp.225-228
• /
• 2011

동영상을 고효율로 압축할 수 있는 중요한 기술 중의 하나가 움직임 추정 기술이다. 움직임 추정 기술에서 가장 널리 사용되는 탐색 방식과 정합오차를 판단하는 기준은 각각 전역 탐색(FS: Full Search)알고리듬과 Sum of Absolute Differences(SAD)이다. 하지만, FS와 SAD를 사용한 움직임 추정기술은 인코더 전체 계산량의 50%이상을 차지하게 된다. 무선 통신 및 인터넷 환경에서 사용되는 응용프로그램에 대해서는 많은 계산량이 실시간 전송을 어렵게 만든다. 이러한 이유로, 동영상 압축 기술에서 계산량을 줄이는 방법이 중요하게 되었다. 그 결과로, SAD대신 다른 정합 오차 기준을 사용하여 움직임 추정기술의 계산량을 줄이는 알고리듬들이 제안되었다. 본 논문에서는 계산량을 줄이면서 하드웨어 구현 시 많은 이점을 가진 1비트 변환 (One-bit Transform, 1BT)알고리듬과 1비트 변환의 성능을 향상시킨 제한된 1비트 변환(Constrained one-bit transform, C-1BT)을 소개하고 C-1BT방법에 있어서 기존 방식의 빠른 인코딩속도를 유지하면서 PSNR을 증가시키는 알고리듬을 제안한다. 제안하는 알고리듬에서는 기존 C-1BT에서 고정해서 사용한 파라미터 D값을 대신에 현재블록과 동일한 위치에 있는 참조영역의 블록과 그 주변블록의 움직임벡터 정보를 이용해서 블록의 움직임 정도를 판단하고, 블록단위로 D값을 적응적으로 결정한다. 실험결과는 제안하는 알고리듬이 기존의 알고리듬과 비교하여 평균 0.11dB PSNR 증가를 보여 준다.