• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.39 no.1
• /
• pp.66-75
• /
• 2002

For the theoretical performance analysis of Viterbi Decoder for wireless LAN with data rate 12Mbps, code rate 1/2 and constraint length 7 defined in IEEE 802.11a, the transfer function is derived using Cramer's rule and the first-event error probability and bit error probability is derived under the AWGN. In the design process, input symbol is quantized into 16 steps for 4 bit soft decision and register exchange method instead of memory method is proposed for trace back, which enables the majority at the final decision stage. In the implementation, the Viterbi decoder based on parallel architecture with pipelined scheme for processing 12Mbps high speed data rate and AWGN generator are implemented using FPGA chips. And then its performance is verified in real time.

• Journal of KIISE:Computer Systems and Theory
• /
• v.34 no.3
• /
• pp.113-123
• /
• 2007

This paper presents a high-performance elliptic curve cryptographic processor over $GF(2^m)$. The proposed design adopts Lopez-Dahab Montgomery algorithm for elliptic curve point multiplication and uses Gaussian normal basis for $GF(2^m)$ field arithmetic operations. We select m=163 which is the smallest value among five recommended $GF(2^m)$ field sizes by NIST and it is Gaussian normal basis of type 4. The proposed elliptic curve cryptographic processor consists of host interface, data memory, instruction memory, and control. We implement the proposed design using Xilinx XCV2000E FPGA device. Based on the FPGA implementation results, we can see that our design is 2.6 times faster and requires significantly less hardware resources compared with the previously proposed best hardware implementation.

• Journal of the Korea Society of Computer and Information
• /
• v.11 no.2 s.40
• /
• pp.159-167
• /
• 2006

Lipreading has been suggested as one of the methods to improve the performance of speech recognition in noisy environment. However, existing methods are developed and implemented only in software. This paper suggests a hardware design for real-time lipreading. For real-time processing and feasible implementation, we decompose the lipreading system into three parts; image acquisition module, feature vector extraction module, and recognition module. Image acquisition module capture input image by using CMOS image sensor. The feature vector extraction module extracts feature vector from the input image by using parallel block matching algorithm. The parallel block matching algorithm is coded and simulated for FPGA circuit. Recognition module uses HMM based recognition algorithm. The recognition algorithm is coded and simulated by using DSP chip. The simulation results show that a real-time lipreading system can be implemented in hardware.

• Journal of IKEEE
• /
• v.24 no.1
• /
• pp.200-207
• /
• 2020

In this paper, an area-efficient feature extractor was proposed for security surveillance radar systems and FPGA-based implementation results were presented. In order to reduce the memory requirements, features extracted from Doppler profile for FFT window-size are used, while those extracted from total spectrogram for frame-size are excluded. The proposed feature extractor was design using Verilog-HDL and implemented with Xilinx Zynq-7000 FPGA device. Implementation results show that the proposed design can reduce the logic slice and memory requirements by 58.3% and 98.3%, respectively, compared with the existing research. In addition, security surveillance radar system with the proposed feature extractor was implemented and experiments to classify car, bicycle, human and kickboard were performed. It is confirmed from these experiments that the accuracy of classification is 93.4%.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.20 no.3
• /
• pp.326-331
• /
• 2010

This paper presents the design and implementation of a data acquisition system with a large number of multi-channels for manufacturing machine. The system having a throughput of 800-ch analog signals has been designed with Quartus II tool and Cyclone II FPGA. The proposed system is suitable for the large scale data handling in order to distinguish whether the operation is correct or not. The designed system is composed of a control unit, voltage divider and USB interface. To reduce the data throughput, we utilized an algorithm which can extract the same data from the achieved data. The test results of the system adapted to a manufacturing machine, show a relevant data acquisition operation of 800 channels in short time.

• Journal of IKEEE
• /
• v.22 no.4
• /
• pp.886-895
• /
• 2018

This paper describes a hardware design of the Secure Hash Algorithm-3 (SHA-3) hash functions that are the latest version of the SHA family of standards released by NIST, and an implementation of ARM Cortex-M0 interface for security SoC applications. To achieve an optimized design, the tradeoff between hardware complexity and performance was analyzed for five hardware architectures, and the datapath of round block was determined to be 1600-bit on the basis of the analysis results. In addition, the padder with a 64-bit interface to round block was implemented in hardware. A SoC prototype that integrates the SHA-3 hash processor, Cortex-M0 and AHB interface was implemented in Cyclone-V FPGA device, and the hardware/software co-verification was carried out. The SHA-3 hash processor uses 1,672 slices of Virtex-5 FPGA and has an estimated maximum clock frequency of 289 Mhz, achieving a throughput of 5.04 Gbps.

• Journal of Advanced Navigation Technology
• /
• v.22 no.6
• /
• pp.675-680
• /
• 2018

In this paper, we propose a hand gesture recognizer using restricted coulomb energy (RCE) neural network, and present hardware implementation results for real-time learning and recognition. Since RCE-NN has a flexible network architecture and real-time learning process with low complexity, it is suitable for hand recognition applications. The 3D number dataset was created using an FPGA-based test platform and the designed hand gesture recognizer showed 98.8% recognition accuracy for the 3D number dataset. The proposed hand gesture recognizer is implemented in Intel-Altera cyclone IV FPGA and confirmed that it can be implemented with 26,702 logic elements and 258Kbit memory. In addition, real-time learning and recognition verification were performed at an operating frequency of 70MHz.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.12
• /
• pp.1609-1617
• /
• 2019

Described in this paper is a design of hardware accelerator for implementing public-key cryptographic protocols (PKCPs) based on Elliptic Curve Cryptography (ECC) and RSA. It supports five elliptic curves (ECs) over GF(p) and three key lengths of RSA that are defined by NIST standard. It was designed to support four point operations over ECs and six modular arithmetic operations, making it suitable for hardware implementation of ECC- and RSA-based PKCPs. In order to achieve small-area implementation, a finite field arithmetic circuit was designed with 32-bit data-path, and it adopted word-based Montgomery multiplication algorithm, the Jacobian coordinate system for EC point operations, and the Fermat's little theorem for modular multiplicative inverse. The hardware operation was verified with FPGA device by implementing EC-DH key exchange protocol and RSA operations. It occupied 20,800 gate equivalents and 28 kbits of RAM at 50 MHz clock frequency with 180-nm CMOS cell library, and 1,503 slices and 2 BRAMs in Virtex-5 FPGA device.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.6
• /
• pp.813-818
• /
• 2021

This paper proposes an optimized hardware implementation method for existing CIE1931 color gamut control algorithm. Among the post-processing methods of dehazing algorithms, existing algorithm with relatively low computations have the disadvantage of consuming many hardware resources by calculating large bits using Split multiplier in the computation process. The proposed algorithm achieves computational reduction and hardware miniaturization by reducing the predefined two matrix multiplication operations of the existing algorithm to one. And by optimizing the Split multiplier computation, it is implemented more efficient hardware to mount. The hardware was designed in the Verilog HDL language, and the results of logical synthesis using the Xilinx Vivado program were compared to verify real-time processing performance in 4K environments. Furthermore, this paper verifies the performance of the proposed hardware with mounting results on two FPGAs.

• Proceedings of the KIEE Conference
• /
• 2008.04a
• /
• pp.79-80
• /
• 2008

본 논문은 FPGA 기반에서 실수형 프로세서의 설계 및 구현에 대한 내용과 이를 이용하여 휴머노이드 로봇 팔의 위치제어를 위한 PD 제어기반의 신경회로망 제어기의 구현에 대한 내용이다. 설계된 프로세서는 명령어 기반의 처리를 통해 산술 연산 뿐만 아니라 로봇의 제어에 사용되는 외부 모듈의 사용이 가능하도록 설계하였으며, 신경회로망 구현에 사용되는 지수함수를 효율적으로 근사화하기 위한 Taylor series를 이용한 알고리즘을 하드웨어 레벨에서 구현하였다. 휴머노이드 로봇 팔의 위치 추종을 위해 고전적인 PD 제어기를 설계하고 PD 기반의 신경회로망 제어기를 설계하였다. 로봇 팔의 6축 제어를 위한 신경회로망 제어기에 요구되는 많은 연산을 감당하도록 하기 위해 설계된 프로세서를 통해 정의된 프로그래밍언어로 제어 프로그램을 작성하였다. PD 제어기와 PD 기반의 신경회로망 제어기를 하드웨어에 설계하여 로봇팔의 위치 추종을 실험하였으며 성능을 비교 검증하였다. 프로세서는 Altera의 Stratix II EP2S180 DSP development board에 구현되었으며 실험적으로 25MIPS의 성능을 가지는 것으로 나타났다.