• Journal of KIISE:Computing Practices and Letters
• /
• v.7 no.4
• /
• pp.372-381
• /
• 2001

In this paper SEED, the Korea Standard 128-bit block cipher algorithm is implemented with VHDL and mapped into one FPGA. SEED consists of round key generation block, F function block, G function block, round processing block, control block and I/O block. The designed SEED is realized in an FPGA but we design it technology-independently so that ASIC or core-based implementation is possible. SEED requires many hardware resources which may be impossible to realize in one FPGA. So it is necessary to minimize hardware resources. In this paper only one G function is implemented and is used for both the F function block and the round key block. That is, by using one G function sequentially, we can realize all the SEED components in one FPGA. The used cell rate after synthesis is 80% in Altem FLEXI0KlOO. The resulted design has 28Mhz clock speed and 14.9Mbps performance. The SEED hardware is technology-independent and no other external component is needed. Thus, it can be applied to other SEED implementations and cipher systems which use SEED.

• The KIPS Transactions:PartC
• /
• v.8C no.1
• /
• pp.32-40
• /
• 2001

In this paper, we propose a high-speed modular multiplication algorithm which revises conventional Montgomery's algorithm. A hardware architecture is also presented to implement 1024-bit RSA cryptosystem for digital signature based on the proposed algorithm. Each iteration in our approach requires only one addition operation for two n-bit integers, while that in Montgomery's requires two addition operations for three n-bit integers. The system which is modelled in VHDL(VHSIC Hardware Description Language) is simulated in functionally through the use of $Synopsys^{TM}$ tools on a Axil-320 workstation, where Altera 10K libraries are used for logic synthesis. For FPGA implementation, timing simulation is also performed through the use of Altera MAX + PLUS II. Experimental results show that the proposed RSA cryptosystem has distinctive features that not only computation speed is faster but also hardware area is drastically reduced compared to conventional approach.

• Journal of Computing Science and Engineering
• /
• v.12 no.1
• /
• pp.24-35
• /
• 2018

Deep convolutional neural network (DCNN) is an advanced technology in image recognition. Because of extreme computing resource requirements, DCNN implementation with software alone cannot achieve real-time requirement. Therefore, the need to implement DCNN accelerator hardware is increasing. In this paper, we present a field programmable gate array (FPGA)-based hardware accelerator design of DCNN targeting handwritten Hangul character recognition application. Also, we present design optimization techniques in SDAccel environments for searching the optimal FPGA design space. The techniques we used include memory access optimization and computing unit parallelism, and data conversion. We achieved about 11.19 ms recognition time per character with Xilinx FPGA accelerator. Our design optimization was performed with Xilinx HLS and SDAccel environment targeting Kintex XCKU115 FPGA from Xilinx. Our design outperforms CPU in terms of energy efficiency (the number of samples per unit energy) by 5.88 times, and GPGPU in terms of energy efficiency by 5 times. We expect the research results will be an alternative to GPGPU solution for real-time applications, especially in data centers or server farms where energy consumption is a critical problem.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.2
• /
• pp.278-287
• /
• 2011

NMEA 2000 protocol known as IEC 61162-3 of Multi-talker, Multi-listener and Plug and Play network communication has been adopted as standard network for SOLAS(Safety of Life at Sea) ship by IMO. This paper focuses on the implementation of FPGA and MicroBlaze for NMEA 2000 based gateway, which is able to convert NMEA 2000 protocol into various types of network protocol such as Ethernet, UART and USB using Vertex4-based ML401 board. Each communication module and the stack of NMEA 2000 are mounted on FPGA. To be able to receive each communication data, ML401 board is configured to handle required communication speed. PC based NMEA 2000 monitoring program is developed to verify that data on different networks are correctly converted each other in real time.

• Journal of the Institute of Convergence Signal Processing
• /
• v.5 no.3
• /
• pp.230-235
• /
• 2004

This paper describes FPGA implementation of a pointer interpreter which can support a synchronization of SDH(or SONET)-based transmission network. The pointer interpreter consists of a pointer-word extractor and a pointer-word interpreter The pointer-word extractor which is composed of mod-6480 counter, shift register and pointer synchronizing block, finds out the H1 and H2 pointer word from a 51.84 Mb/s AU-3/STS-1 data frame and then performs the synchronizing with a 6.48 Mb/s by dividing them in 8. Based on the extracted pointer word, pointer-word interpreter analyzes pointer states such LOP, AIS and NORM according to pointer state-transition algorithm. It consists of a majority vote, a pointer word valid/invalid check, a pointer justification, and a pointer state check. The simulation results of Xilinx Virtex XCV200PQ240 FPGA chip shows the exact pointer word extraction and correct decision of pointer status based on extracted pointer word. The proposed pointer interpreter is suitable for pointer interpretation of 155 Mb/s STM-1/STS-3 frame.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.14 no.4
• /
• pp.123-134
• /
• 2004

In this paper a high speed architecture of the RC4 stream cipher is proposed and its FPGA implementation is presented. Compared to the conventional RC4 designs which have long initialization operation or use double or triple S-arrays to reduce latency delay due to S-array initialization phase, the proposed architecture for RC4 stream cipher eliminates the S-array initialization operation using 256-bit valid entry scheme and supports 40/128-bit key lengths with efficient modular arithmetic hardware. The proposed RC4 stream cipher is implemented using Xilinx XCV1000E-6H240C FPGA device. The designed RC4 stream cipher has about a throughput of 106 Mbits/sec at 40 MHz clock and thus can be applicable to WEP processor and RC4 key search processor.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.11 no.2
• /
• pp.127-134
• /
• 2006

This paper describes a fully hardware realization of vector controller for the permanent magnet synchronous motor (PMSM) using high density field programmable gate mays (FPGA). In the proposed system, the vector controller including vector transformation , PI regulator, position and speed measurement, current measurement, and space vector PWM blocks is implemented in a FPGA using a VHSIC hardware description language (VHDL). The experimental results using a 1.1kW PMSM are provided to show the validity of the proposed system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.3
• /
• pp.413-420
• /
• 2006

In this thesis, a RFID baseband system is implemented based on the international standard ISO/IEC 18000-6 Type-B using FPCA, and also anti-collision algorithm is implemented to improve the system performance. We compares the performance of the proposed anti-collision algorithm with that binary tree algorithm and bit-by-bit algorithm, and also validated analytic results using OPNET simulation. The proposed algorithm for Type-B transmission protocol and collision prohibition was designed using ISE7.1i which is a FPGA design-tool of Xilinx and implemented with Spartan2 chip which is a FPGA device.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.336-339
• /
• 2007

A chaos signal is used in all fields like engineering, a medical science and a biology very much, and study regarding the digital communication system that used a recent chaos signal is consisting actively. Applied a chaos signal in a digital communication system, and this paper designed six chaos signal generator to have been composed of by nonlinear equations as used System Generator, and implemented hardware to FPGA. Loaded bit stream to a FPGA board in order to verify this design to Hardware co-simulation from these results. Also, compared as investigated the maximum action frequency through timing analysis and resource of logic in order to evaluate performance of six chaos generator.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.131-134
• /
• 2007

In this paper, we propose the 1D-CZP pattern for FPGA verification. The algorithm that was implemented by Verilog-HDL on FPGA board is verified before the chip is producted. Input through the external sensor might not be enough to verify the algorithm on FPGA board. Hence, both external input and internal input can lead the verification of the algorithm. This paper suggests the hardware implementation of compact 1D-CZP pattern that has the random input. It is useful to analyze the characteristics of the filter frequencies and organized as ROM Table which is efficient to Modulus operation.