• Aerospace Engineering and Technology
• /
• v.12 no.2
• /
• pp.131-139
• /
• 2013

This paper describes the design and implementation of a small avionics unit based on soft CPU. A small avionics unit is developed with the soft CPU which can be wholly implemented in FPGA using logic synthesis. Design and integration of a modular architecture for versatile, reconfigurable and re-adaptable is presented with the Nios-II processor. To gain modular architecture, both at main board and sub-board level, attention has been paid to the selection of interfaces and an adequate data and power bus.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1997.11a
• /
• pp.67-72
• /
• 1997

본 논문은 저비용이면서 정확한 제어를 수행하는 새로운 퍼지 제어기의 재구성 가능한 FPGA 시스템상의 구현을 다룬다. 제안한 퍼지 제어기 (Fuzzy Logic Controller : FLC)의 시스템 구조와 이의 VHDL 설계 및 시뮬레이션은 다른 논문에 나타나 있다. 제안한 퍼지 제어기의 구현 과정은 다음과 같다. 각 모듈은 VHDL 언어에 의해서 기술된 뒤, Synopsys사의 FPGA 컴파일러에 의해 합성된다. 합성된 각 모듈은 Xilinx사의 XactStep 6.0에 의해 최적화 및 배치, 배선이 이루어진다. 얻어진 Xilinx rawbit 파일은 VCC사의 r2h에 의해 C 언어의 header 파일 형태의 하드웨어 object로 변환된다. C언어 형태의 하드웨어 object를 포함하는 응용 제어 프로그램이 C 컴파일러에 의해 컴파일된 후, 이 실행 파일이 재구성 가능한 FPGA 시스템 상에 다운로드된다. 제안한 퍼지 제어기를 EVCI 보드 상에 동적으로 구현하여 트럭 후진 주차 제어에 사용할 때 걸리는 시간을 Synopsys사의 VHDL 시뮬레이터와 워크스테이션상에서 C언어에 의해 구현하여 트럭 후진 주차 제어에 사용할 때 걸리는 시간을 각각 비교하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.409-411
• /
• 2015

본 논문은 128/192/256-비트의 마스터키 길이를 지원하는 경량 블록 암호 알고리즘 CLEFIA-128/192/256의 FPGA 설계에 대하여 기술한다. 라운드키 생성을 위한 중간키 생성과 라운드 변환이 단일 데이터 프로세싱 블록으로 처리되도록 설계하였으며, 변형된 GFN(Generalized Feistel Network) 구조와 키 스케줄링 방법을 적용하여 데이터 프로세싱 블록과 키 스케줄링 블록의 회로를 단순화시켰다. Verilog HDL로 설계된 CLEFIA 크립토 프로세서를 FPGA로 구현하여 정상 동작함을 확인하였다. Vertex5 XC5VSX50T FPGA에서 1,563개의 LUT FilpFlop pairs로 구현되었으며, 최대 112 Mhz 81.5/69/60 Mbps의 성능을 갖는 것으로 예측되었다.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.52 no.12
• /
• pp.708-716
• /
• 2003

The surface EMG signal detected from voluntarily activated muscles can be used as a control signal for functional electrical stimulation. To use the voluntary EMG signal, it is necessary to eliminate the muscle response evoked by the electrical stimulation and enable to process the algorithm in real time. In this paper, we propose the Gram-Schmidt(GS) algorithm and implement it in FPGA(field programmable gate array). GS algorithm is efficient to eliminate periodic signals like muscle response, and is more stable and suitable to FPGA implementations than the conventional least-square approach, due to the systolic array structure.

• Journal of information and communication convergence engineering
• /
• v.11 no.3
• /
• pp.190-198
• /
• 2013

Recently, one of the most vital advancement in the field of finance is high-performance trading using field-programmable gate array (FPGA). The objective of this paper is to design high-performance Black Scholes option trading system on an FPGA. We implemented an efficient Black Scholes Call Option System IP on an FPGA. The IP may perform 180 million transactions per second after initial latency of 208 clock cycles. The implementation requires the 64-bit IEEE double-precision floatingpoint adder, multiplier, exponent, logarithm, division, and square root IPs. Our experimental results show that the design is highly efficient in terms of frequency and resource utilization, with the maximum frequency of 179 MHz on Altera Stratix V.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2003.05a
• /
• pp.397-400
• /
• 2003

FPGA 보드를 이용하여 디지털 논리 설계를 검증하려면 고가의 논리 분석기 장비를 필요로 한다. 본 논문은 FPGA 설계에 대한 검증을 PC에서 직접 입력 데이터를 FPGA 보드 쪽으로 전달하고 그 결과를 다시 PC 쪽에서 GUI 형태로 확인할 수 있도록 구성된, 논리 분석기 기능을 갖는 VHDL 모듈과 소프트웨어의 구현에 관한 것이다. 이와 같은 VHDL 모듈과 소프트웨어 모듈을 활용함으로써 추가 비용 없이 검증 과정을 수행할 수 있다.

• Proceedings of the KIEE Conference
• /
• 1999.07g
• /
• pp.3067-3069
• /
• 1999

In this paper, A bit processor for controlling sequence logic was implemented, using a FPGA. This processor consists of program memory interface. I/O interface, parts for instruction fetch and decode, registers, ALU, program counter and etc. This FPGA is able to execute sequence instruction during program fetch cycle, because of divided bus system, program bus and data bus. Also this bit processor has instructions set that 16bit or 32bit fixed width, so instruction decoding time and data memory interface time was reduced. This FPGA was synthesized by pASIC 2 SpDE and Synplify-Lite synthesis tool of Quick Logic company. The final simulation for worst cases was successfully performed under a Verilog HDL simulation environment. And the FPGA programmed for an 84 pin PLCC package. Finally, the benchmark was performed to prove that Our FPGA has better performance than DSP(TMS320C32-40MHz) for the sequence logic control of PLC.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1577-1580
• /
• 2004

This paper proposes a design and implementation of transversal adaptive digital filter using LMS (Least Mean Squares) adaptive algorithm. The filter structure is based on Distributed Arithmetic (DA) which is able to calculate the inner product by shifting and accumulating of partial products and storing in look-up table, also the desired adaptive digital filter will be multiplierless filter. In addition, the hardware implementation uses VHDL (Very high speed integrated circuit Hardware Description Language) and synthesis using FLEX10K Altera FPGA (Field Programmable Gate Array) as target technology and uses Leonardo Spectrum and MAX+plusII program for overall development. The results of this design are shown that the speed performance and used area of FPGA. The experimental results are presented to demonstrate the feasibility of the desired adaptive digital filter.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.9 no.6
• /
• pp.335-344
• /
• 2014

As a kind of 2D spatial coordinate transform, image warping is a basic image processing technique utilized in various applications. Though image warping algorithm is composed of relatively simple operations such as memory accesses and computations of weighted average, real-time implementations on embedded vision systems suffer from limited computational power because the simple operations are iterated as many times as the number of pixels. This paper presents a real-time implementation of a look-up table(LUT)-based image warping using an FPGA. In order to ensure sufficient data transfer rate from memories storing mapping LUT and image data, appropriate memory devices are selected by analyzing memory access patterns in an LUT-based image warping using backward mapping. In addition, hardware structure of a parallel and pipelined architecture is proposed for fast computation of bilinear interpolation using fixed-point operations. Accuracy of the implemented hardware is verified using a synthesized test image, and an application to real-time lens distortion correction is exemplified.

• IEIE Transactions on Smart Processing and Computing
• /
• v.6 no.2
• /
• pp.133-139
• /
• 2017

Vehicles have increasingly evolved and become intelligent with convergence of information and communications technologies (ICT). Vehicle communications (VC) has become one of the major necessities for intelligent vehicles. However, VC suffers from serious security problems that hinder its commercialization. Hence, the IEEE 1609 Wireless Access Vehicular Environment (WAVE) protocol defines a security service for VC. This service includes Advanced Encryption Standard-Counter with CBC-MAC (AES-CCM) for data encryption in VC. A high-speed AES-CCM crypto module is necessary, because VC requires a fast communication rate between vehicles. In this study, we propose and implement an efficient AES-CCM hardware architecture for high-speed VC. First, we propose a 32-bit substitution table (S_Box) to reduce the AES module latency. Second, we employ key box register files to save key expansion results. Third, we save the input and processed data to internal register files for secure encryption and to secure data from external attacks. Finally, we design a parallel architecture for both cipher block chaining message authentication code (CBC-MAC) and the counter module in AES-CCM to improve performance. For implementation of the field programmable gate array (FPGA) hardware, we use a Xilinx Virtex-5 FPGA chip. The entire operation of the AES-CCM module is validated by timing simulations in Xilinx ISE at a speed of 166.2 MHz.