• 한국수산과학회지
• /
• 제54권6호
• /
• pp.1036-1044
• /
• 2021

A linear array acoustic transducer with 12 tonpilz elements mounted independently on a gradual wedge-shaped tail mass was fabricated, tested and analyzed. The compensated transducer, which is modified by including a series inductance of 137 µH in the developed linear array transducer, attained improved figure of merit (FOM) performance characteristics compared with the uncompensated transducer. The four resonant frequency bands were identified from the measured FOM curve. The FOM response patterns over the frequency ranges of 31 to 40 kHz and 50 to 60 kHz were relatively uniform, whereas sharp resonance peaks were observed at around 73 kHz and 84 kHz. These results indicate that the developed linear array transducer can be used as an enhanced broadband transducer of echo sounder, and the operating frequency can be selected for more effective echo surveys in the fishing ground.

• 대한수학회보
• /
• 제34권4호
• /
• pp.667-678
• /
• 1997

This paper contains a convergence analysis of a flexible restarted FOM(k)(FFOM(k)), and its performance is compared with FGMRES(k). Performances of these two algorithms with variable preconditioners are also compared with those of preconditioned FOM(k) and GMRES(k). Numerical experiments show that FFOM(k) performs as well as, or better than for some problems, FGMRES(k).

• Asian-Australasian Journal of Animal Sciences
• /
• 제17권6호
• /
• pp.836-842
• /
• 2004

An experiment was conducted to study the performance of broilers chicks (2 to 42 d of age) fed diets containing pearl millet (PM, Pennisetum typhoides), foxtail millet (FOM, Setaria italica) or finger millet (FIM, Elusine coracana) totally replacing (w/w) yellow maize (YM) with and with out supplementing non-starch polysaccharide (NSP) hydrolysing enzymes at the rate of 0.5 g/kg diet. Enzyme preparation contained amylase 2,400 units, hemi-cellulase 5,400 units, cellulase 12,000 units, protease 2,400 units and beta-glucanase 106 units/g. Each diet was fed to eight replicates (five female Vencob broilers/replicate) housed in stainless steel battery brooders. The estimated metabolizable energy (ME) contents of YM, PM, FOM and FIM were FM (PM) were about 3,389, 2,736, 3,303 and 2,846 kcal/kg, respectively. Total replacement of YM with FOM did not influence the body weight gain, ready to cook yield, relative weights of giblet, liver, intestine, lymphoid organs (bursa and spleen) and length of intestine, antibody titers and livability at 42 d of age. But the food efficiency decreased significantly in FOM fed broilers compared those fed YM. Further, the fat content in thigh muscle reduced with FOM fed groups compared to those fed YM. The performance of broilers decreased significantly in PM and FIM fed broilers compared to those fed YM. The relative weights of giblet, gizzard and liver increased in FIM fed groups compared to those fed YM as the principal source of energy in broilers. Incorporation of NSP hydrolysing enzymes in commercial broiler diets improved the efficiency of feed utilization during starter phase but not at 42 d of age. The results thus indicate that yellow maize can be replaced in toto on weight basis in commercial broiler diets without affecting the performance. Supplementation of NSP hydrolysing enzymes was beneficial in enhancing feed utilization during the starter phase.

• 설비공학논문집
• /
• 제9권3호
• /
• pp.284-291
• /
• 1997

A hydrogen liquefaction equipment by direct cooling has been designed and built at KIST. Cool-down characteristics and liquefaction performance of the equipment have been investigated. The hydrogen liquefaction equipment consists of a GM refrigerator, a liquefaction velssel, a radiation shield and a cryostat. It is found that the hydrogen starts to be liquefied in the liquefaction vessel after 40~50 minutes of cool-down from the gas state of 270K. The effect of natural convection phenomena of charged gas in liquefaction vessel on the cool-down characteristics is evaluated by comparing with those in vacuum of liquefaction vessel. It is seen that the cool-down time of a liquefaction vessel is substantially increased in vacuum environment of liquefaction vessel. The experiments have been performed for 1~5 atm of hydrogen pressure to investigate the influence of hydrogen pressure on the liquefaction rate and figure of merit(FOM). It is found that both liquefaction rate and FOM are increased as the charged hydrogen pressure is increased.

• 한국산학기술학회논문지
• /
• 제19권12호
• /
• pp.498-506
• /
• 2018

현재 연합연습은 미군 주도 하 단일 페더레이션으로 모의지원을 하고 있다. 그러나 전작권 전환 이후에는 자국의 보안정책과 정보보호 등의 이유로 현재의 단일 페더레이션에는 많은 제약사항들이 수반된다. 이러한 문제점으로부터 파생되는 다양한 문제점들을 극복하기 위한 방법으로 다중 페더레이션 구성의 필요성이 꾸준히 제기되고 있다. HLA(High Level Architecture) 규칙은 하나의 페더레이션에서 모든 페더레이트들이 같은 FOM(Federation Object Model)과 RTI(Run Time Infrastructure)를 사용하여야 한다. 현재의 단일 페더레이션에서는 이질의 FOM과 RTI를 적용하기에는 제한사항이 있다. 따라서 본 논문에서는 이질의 FOM과 RTI를 적용할 수 있는 연동 접속기(Confederation Interface)를 구현하여 전작권 전환 이후 현재의 단일 페더레이션 연동구조의 단점인 체계 구성의 확장성 미흡과 보안의 취약성을 극복할 수 있는 방법을 제시하고자 한다. 실제 연합연습 환경에서의 연동 시험결과, CI를 적용한 체계가 이질의 FOM과 RTI를 사용하여 다중 페더레이션을 구현 할 수 있었다. 결론적으로 CI를 통해 전작권 전환 이후 한국군이 주도할 수 있는 연합연습 모의체계 구축이 가능할 것으로 판단된다.

• 설비공학논문집
• /
• 제12권2호
• /
• pp.131-139
• /
• 2000

A direct hydrogen liquefaction equipment has been developed and tested, which consists of a GM refrigerator, a liquefaction vessel, a radiation shield, a cryostat, and an ortho-para converter with catalyst. The effect of ortho-para hydrogen conversion on the performance of hydrogen liquefaction has been investigated. The time needed for the hydrogen liquefaction process with hydrogen pressure charge of 4 atm was delayed to around 75 minutes, and the liquefied mass flow rate of the hydrogen was about 0.0150∼ 0.0205 g/s when the hydrogen was liquefied with the direct hydrogen liquefaction system considering ortho-para conversion. With ortho-para conversion, the liquefied mass flow rate decreased up to 20%. Considering ortho-para conversion, there were up to 30% increase in the work input per unit liquefied mass flow rate. When the ortho-para conversion was considered, FOM decreased to be about 0.031∼0.045.

• Journal of Radiation Protection and Research
• /
• 제44권2호
• /
• pp.53-63
• /
• 2019

Background: As neutron fields are always accompanied by gamma rays, it is essential to distinguish neutrons from gamma rays in the detection of neutrons. Neutrons and gamma rays can be separated by pulse shape discrimination (PSD) methods. Recently, we performed characterization of a stilbene scintillator detector and an EJ-301 liquid scintillator detector with a high-speed digitizer DT5730 and investigated optimized PSD variables for both detectors. This study is for providing a basis for developing fast neutron/gamma-ray dual-particle imager. Materials and Methods: We conducted PSD experiments using stilbene scintillator and EJ-301 liquid scintillator and evaluated neutron and gamma ray discriminability of each PSD method with a $^{137}Cs$ gamma source and a $^{252}Cf$ neutron source. We implemented digital signal processing techniques to apply two PSD methods - the charge comparison (CC) method and the constant time discrimination (CTD) method - to distinguish neutrons from gamma rays. We tried to find optimized PSD variables giving the best discriminability in a given experimental condition. Results and Discussion: For the stilbene scintillator detector, the charge comparison method and the constant time discrimination method both delivered the PSD FOM values of 1.7. For the EJ-301 liquid scintillator detector, both PSD methods delivered the PSD FOM values of 1.79. With the same PSD variables, PSD performance was excellent in $300{\pm}100keVee$, $500{\pm}100keVee$, and $700{\pm}100keVee$ energy regions. This result shows that we can achieve an effective discrimination of neutrons from gamma rays using these scintillator detector systems. Conclusion: We applied both PSD methods to a stilbene and a liquid scintillator and optimized the PSD performance represented by FOM values. We observed a good separation performance of both scintillators combined with a high-speed digitizer and digital PSD. These results will provide reference values for the dual-particle imager we are developing, which can image both fast neutrons and gamma rays simultaneously.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제6권
• /
• pp.124-135
• /
• 1998

A thermodynamic cycle analysis is performed for refrigerator-precooled Linde-Hampson hydrogen liquefiers, including catalysts for the ortho-to-para conversion. Three different configurations of the liquefying system, depending upon the method of the o-p conversion, are selected for the analysis. After some simplifying and justifiable assumptions are made, a general analysis program to predict the liquid yield and the figure of merit (FOM) is developed with incorporating the commercial computer code for the thermodynamic properties of hydrogen. The discussion is focused on the effect of the two primary design parameters - the precooling temperature and the high pressure of the cycle. When the precooling temperature is in a range between 45 and 60 K, the optimal high pressure for the maximal liquid yield is found to be about 100 to 140 bar, regardless of the ortho-to-para conversion. However, the FOM can be maximized at slightly lower high pressures, 75 to 130 bar. It is concluded that the good performance of the precooling refrigerator is significant in the liquefiers, because at low precooling temperatures high values of the liquid yield and the FOM can be achieved without compression of gas to a very high pressure.

• 한국전기전자재료학회논문지
• /
• 제37권5호
• /
• pp.500-506
• /
• 2024

The transparent electrode characteristics of the SnO₂/AgNi/SnO₂ (OMO) multilayer structures prepared by sputtering were investigated according to the annealing temperature. Ni-doped Ag of various compositions was selected as the metal layer and heat treatment was performed at 100~300℃ to evaluate the thermal stability of the metals. The manufactured OMO multilayer structures were heat treated for 6 hours at 400~600℃ in an N₂ atmosphere. The structural, electrical, and optical properties of the OMO structures before and after annealing were evaluated and analyzed using a UV-VIS spectrophotometer, 4-point probe, XPS, FE-SEM, etc. OMO with Ni-doped Ag shows improved performance due to the reduction of structural defects of Ag during annealing, but OMO structure with pure Ag shows degradation characteristics due to Ag diffusion into the oxide layer during high-temperature annealing. The figure of merit (FOM) of SnO₂/Ag/SnO₂ was highest at room temperature and gradually decreased as the heat treatment temperature increased. On the other hand, the FOM value of SnO₂/AgNi/SnO₂ mostly showed its maximum value at high temperature(~550℃). In particular, the FOM value of SnO₂/Ag-Ni (3.2 at%)/SnO₂ was estimated to be approximately 2.38×10^-2 Ω^-1. Compared to transparent electrodes made of other similar materials, the FOM value of the SnO₂/Ag-Ni (3.2 at%)/SnO₂ multilayer structure is competitive and is expected to be used as an alternative transparent conductive electrode in various devices.

• 전자공학회논문지 IE
• /
• 제44권2호
• /
• pp.14-20
• /
• 2007

본 논문에서는 개선된 성능을 갖는 4치 D-플립플롭을 제안하였다. 제안된 4치 D 플립플롭은 뉴런모스를 기반으로 바이어스 인버터, 온도계 코드 출력회로, EX-OR 게이트, 전달 게이트를 이용하여 4치 항등 논리회로(Identity logic circuit)를 구성하고, 이를 2진의 RS 래치 회로와 결합하여 설계하였다. 설계된 회로들은 3.3V 단일 공급 전원에서 $0.35{\mu}m$ 1-poly 6-metal COMS 공정 파라미터 표준조건에서 HSPICE를 사용하여 모의실험 하였다. 모의실험 결과, 본 논문에서 제안된 4치 D 플립플롭은 100MHz 전후까지의 빠른 동작속도로 측정되었으며 PDP(Power dissipation-delay time product)와 FOM(Figure of merit)은 각각 59.3pJ과 33.7로 평가되어졌다.