• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.11
• /
• pp.801-807
• /
• 2022

In this paper, we propose an ultra compact S-Band PCM/FM telemetry transmitter. The equipment is compact, so it can be applied to a limited space and capable of stable data transmission was designed and manufactured even with specifications set differently for each operating environment and system. RF direct conversion structure is used for the miniaturization of equipment, an RF transmission board, Power distribution board, and a signal processing board were implemented on a single PCB, so that the function of the transmitter could be performed with a minimum device. According to the target specification, variable output of 1~10W and variable data rate of 390kbps~12.5Mbps is possible in S-Band(2,200~2,400MHz) without degradation of performance. To verify the performance of the equipment, the RF performance test and BER measurement test were performed after the equipment was manufactured. It was confirmed that the OBW, null-to-null bandwidth, 1st IMD, Spurious emission, Phase noise specification of the PCM/FM modulated signal which is presented by the IRIG standard were satisfied, and we can confirm the data received using the transmitter inspection equipment were transmitted normally without distortion.

• The Journal of the Acoustical Society of Korea
• /
• v.13 no.4
• /
• pp.50-59
• /
• 1994

The pan-european paging system European Radio MEssage System (ERMES), a new system of digital information communication, has 16 channels with 25KHz channel spacing. The ERMES modulation format is 4-PAM/FM. The ERMES operates in the frequency range 169.4125MHz$\~$169.8125MHz. In this paper, an ERMES receiving system according to the European Telecommunication Standard Institute(ETSI) specfication with a double error correction capability is designed. The ERMES receiver system is designed with the conventional circuit and its error performance for muitiple signal modulated by the 4-PAM/FM method are analyzed. Since amplitude imbalance among the signal components can impair the system performance when several receivers are operated on the same RF channel simultaneously, the optimal parameters are obtained in designing the radio system. Performance of the proposed receiver system is verified via computer simulation for processing procedure.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.47 no.5
• /
• pp.81-88
• /
• 2010

In this paper, we proposed an automatic music/non-music signal discrimination system from broadcasting audio signal as a preliminary study of building a sound source monitoring system in real broadcasting environment. By reflecting human speech articulation characteristics, we used three simple time-domain features such as energy standard deviation, log energy standard deviation and log energy mean. Based on the experimental threshold values of each feature, we developed a rule-based algorithm to classify music portion of the input audio signal. For the verification of the proposed algorithm, actual FM broadcasting signal was recorded for 24 hours and used as source input audio signal. From the experimental results, the proposed system can effectively recognize music section with the accuracy of 96% and non-music section with that of 87%, where the performance is good enough to be used as a pre-process module for the a sound source monitoring system.

• Proceedings of the KSR Conference
• /
• 1998.05a
• /
• pp.419-426
• /
• 1998

The information for operating the train should be transmitted to train, with extreme security. In our system, The information, such that the allowable velocity of the train, train existence in current area, and other data necessary for operating train, is transmitted in the form of FM signal. Received by the receiver located on train, the signal is filtered, demodulated, and analyzed for extracting the original information. The analysis of the demodulated signal is done through FFT algorithm using sliding slot. The simulation results shows the validity of the algorithm.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.05a
• /
• pp.178-182
• /
• 2000

During the past five years, there has born tremendous interest worldwide in the possibility of exploiting chaos in wideband communication systems. Many different demodulation techniques have been proposed up to date. They can be divided into two basic categories. In the first approach, like the conventional coherent demodulation techniques, the chaotic signal has to be recovered from the received noisy signal by synchronization. However, the chaotic synchronization techniques published to data are so sensitive to the channel noise and distortion that these techniques can not be used in radio communications. In the second approach, the demodulation is carried out nonsynchronization. This paper surveys the different chaotic communication techniques that can be implemented nonsynchronization and compares the threshold and BER of the different methods. Finally, FM-DCSK is introduced the first step for apply to wideband chaos digital CDMA, where the data is not limited by the inherent nonperiodic property of the chaotic signal.

• Journal of Advanced Navigation Technology
• /
• v.28 no.2
• /
• pp.193-200
• /
• 2024

This paper describes the design and development of a transmit receiver module(TRM) for mounting on X-band SAR of the NEXTSat-2. The TRM generates the chirp signal with required bandwidth through the DDS in X-band and performs frequency conversion, combination for the signal to transmit and be received and frequency synthesis. Tx path of the TRM produces signals of total 28 bandwidths up to 96.8 MHz and has output signal level of more than + 9.37 dBm. Rx path of the TRM has minimum noise figure of 15.7 dB. The measurement results show that required requirements are satisfied. The TRM is installed on the NEXTSat-2 flight model(FM), launched by KSLV-II(Nuri) on May 23, 2023 and currently operational.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.20 no.2
• /
• pp.35-40
• /
• 1983

The bit error probability of PCM/FM system was derived and numerically calculated. Binary NRZ-L baseband signal was premodulation filtered to frequency modulate a sinusoidal carrier, and a common circuit of limiter-discriminator was employed as a detector. Considering both RF spectrum limitation and bit error Probability reduction, it was found that h ≒ 3WT would be reasonable, where h is the frequency deviation ratio, W is the bandwidth of a premodulation filter and T is the time interval of one bit.

• Applied Microscopy
• /
• v.44 no.1
• /
• pp.8-14
• /
• 2014

The auditory system of the Korean greater horseshoe bat (Rhinolophus ferrumequinum korai, RFK) is adapted to its own echolocation signal, which consist of constant frequency (CF) element and frequency modulated (FM) element. In contrast, the Japanese long-fingered bat (Miniopterus schreibersii fuliginosus, MSF) emits FM signals. In the present study, the characteristics of stereocilia in RFK (a CF/FM bat) and MSF (a FM bat) were studied in the apical turn of the cochlea where the lower frequencies are transduced. Stereocilia lengths and numbers were quantitatively measured in RFK by scanning electron microscopy and compared with those of MSF. Each inner hair cells (IHCs) of RFK possessed three rows of stereocilia, whereas MSF possessed five rows of stereocilia. Gradients in stereocilia lengths and numbers of stereocilia of the IHCs of RFK were found to be less pronounced and fewer, respectively, than those of MSF. Each outer hair cells (OHCs) possessed three rows of stereocilia in both species. OHCs stereocilia in RFK that distinguished it from MSF were a shorter length and a greater number of stereocilia. These features suggest that the apical cochleas of RFK are adapted for the processing of higher frequency echolocation calls rather than that of MSF.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.6
• /
• pp.599-607
• /
• 2004

In this paper, using phase locked loop(PLL) synthesizer, we introduce a novel but simple and low cost frequency modulation(FM) circuit of a flat peak frequency deviation fur modulation signal whose frequency covers from outside to inside of the loop-bandwidth of PLL. The FM circuit was basically designed to compensate an amount of feedback of the loop filter in PLL. The circuit also includes the capability of the adjustment of peak frequency deviation and of blocking the intereference with the loop filter. The designed circuit was successfully implemented and showed the flat frequency deviation as expected in the design. In addition, the novel measurement method of the wideband FM modulation index is suggested verified With the suggest measurement, it can be successfully shown the designed circuit has the expected frequency deviation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.8
• /
• pp.1169-1174
• /
• 2002

In this paper, we implemented the sign board system that displays user's image, user's sentence, the information from DARC. The existing sign board is displaying only user's image and sentence. Or other existing sign board is displaying the information via CDMA network. However, our system is also able to display the user's message like other system and gain the information more cheap by DARC. This system includes the main processor, the program memory, the external memory, the DARC module and the LED display module. The external memory stores the user's message files and the order file that decides the displaying order of user's file and the DARC information The DARC module extracts the DARC information from FM signal. From the experiment, we could confirm that this system display the DARC information and the user's message by the order file.