• Journal of Environmental Impact Assessment
• /
• v.11 no.1
• /
• pp.51-66
• /
• 2002

The purpose of this study is to analyze the geomorphological environment changes of tidal flat in the Cheonsu Bay. Especially, it centers on the changes in the sedimentary environment using remote sensing data. Multi-temporal Landsat data and topographic maps were used in this study. The results are summarized as follows: the tidal flat of Cheonsu Bay changes in many ways depending on the direction of the tidal current. In the neighborhood of Ganwoldo, the scale of the tidal flat has continuously been expanded due to the superiority of sedimentation after a tide embankment was built. When we analyzed the grain size of sediments and implemented in-situ field survey, it was found that the innermost part of the bay consists of a mud flat, with the midway part mixed flat, and the nearest part to the sea sand flat. On the other hand, in the neighborhood of Seomot isle and its beach, sedimentation is superior in the eastern part whereas erosion is superior in the western part. In other words, the western coast of the beach is contacted with the open seas and under much influence of ocean wave. The eastern coast is placed at the entrance of the bay and has sand bar and tidal flat developed due to submarine deposits that are accumulated on the sea floor by the tidal current. In conclusions, remote sensing methods can be effectively applied for quantitative analysis of geomorphological changes in tidal flat, and it is expected that the proposed schemes can be applied to another geomorphological environments such as beach, sand dune, and sand wave.

• Journal of the Korean Geotechnical Society
• /
• v.33 no.11
• /
• pp.5-19
• /
• 2017

This study has been conducted to improve the conventional compaction management method by measuring the water content and dry unit weight of soil using the Time Domain Reflectometry (TDR) method. In order to verify the measured value of the developed flat TDR system, laboratory tests were conducted on six soils. Also, based on laboratory experiments, field tests were conducted to evaluate the applicability of the developed flat TDR system. Also, a comparison experiment was conducted with the Purdue TDR system. In addition, FE analysis was done to confirm the influence range of the Flat probe. As a result, it was confirmed that the influence range was about 10 cm. As a result of laboratory experiment, the water content ratio showed an error of about 0.4% on the average, and in the case of dry unit weight, it showed an error of about 1.6%. For the field test, the water content ratio and unit weight showed an error of 0.8% and 2.5%, respectively. Through the experimental results, it was confirmed that the measured value of the Flat TDR system is more accurate than that of the conventional TDR system.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.24 no.2
• /
• pp.169-181
• /
• 2008

The aim of this study was to compare the retention and stability of implant overdenture according to the shape and the number of magnetic attachment. The experimental groups were designed for the number of implants(1, 2, 4) and shape of magnetic attachments(flat, cushion, dome type) resulting in 9 subgroups. 45 attachments were tested attached to $Br{\aa}nemark$ system implants which were planted on a mandibular model. Each attachment was composed of the magnet assembly embedded in a overdenture sample and the abutment keeper screwed into the implants. Dislodging tensile forces were applied to the overdenture samples using an Instron(cross-head speed 50.80mm/min) in 3 directions simulating function: vertical, oblique, and anterior-posterior. The loading was repeated 10 times in each direction for 45 samples. The values of maximum dislodging force of each subgroup were processed statistically using SPSS V. 12.0 at the 0.05 level of significance. The results of this study were as follows: 1. Flat type magnetic overdenture was the most retentive when subjected to vertically directed forces and dome type was the lest retentive when subjected to obliquely directed forces(p<0.05). 2. In case of planting one implant, flat type had a higher vertically retentive force than anterior-posteriorly retentive force. In case of planting two implants, flat type and dome type had a higher vertically retentive force and in case of planting four implants, flat type and cushion type had a higher vertically retentive force than anterior-posteriorly retentive force(p<0.05). 3. The incremental number of dental implant, without regards to the three types of magnetic attachment shapes, showed higher retention of overdenture(p<0.05). From the results, if a patient need much more retention of implant overdenture, flat type magnetic overdenture would be a good treatment. In case of the bruxism where excessive lateral forces are already present, dome type could be expected to produce better results. In case of planting one implant, flat type is more stable than the other shape of magnet and in case of two implant, flat type and dome type are more stable and in case of four implants, flat type and cushion type are more stable. Planting more than two implants and using flat type magnetic attachment would provide better retention and stability of implant overdenture

• Journal of Korean Foot and Ankle Society
• /
• v.8 no.1
• /
• pp.7-10
• /
• 2004

Purpose: To estimate the prevalence of flat foot in the 1st grade primary school children in the Kang-Dong Gu, Seoul, Korea. Materials and Methods: We examined 1336 8 year old the first grade children (2672 feet) in primary school at 5 primary school for prevalence of flat foot and the associating factors in Kang-Dong Gu in April 2003. The group was examined with 2 mm-pannel in physical examination at erect position to put diagnosis of flat foot which showed no plantar arch. The height, weight, foot length and foot width were estimated in all children. We used obesity grading system of Korean Pediatric Association for overweight evaluation. Results: We enrolled 728 boys and 608 girls, and prevalences of each gender were 20.8% and 14.9%. The children who had flat foot were 243 and the prevalence of flat foot was 18.2%. The foot length ranges between 152 mm and 300 mm (mean value 183.6 mm, SD 10.6), and the foot width were between 50 mm and 107 mm (mean value 2.16 mm, SD 4.8). Of the 1336 children group, 1215 children (90.0%) were in range of normal weight, 72 children (5.4%) were in grade-1 overweight, 38 (2.8%) were in grade-2 overweigh and, 11 (0.8%) were in grade-3 overweight. The prevalence of flat foot of each overweight group were 16.3%, 34.7%, 39.5% and 45.5%. Overweight in children effected increased prevalence of flat foot. But there were no significant relationship with flat foot in other factors. Conclusion: Over all prevalence of flat foot of 8 year old children was 18.2% and most of patients were flexible flat foot. The prevalence of flat foot was influenced by overweight remarkably.

• Journal of Wetlands Research
• /
• v.6 no.1
• /
• pp.43-55
• /
• 2004

Meiobenthic community structure was studied in intertidal mud flat and sand flat of Yeochari in Ganghwado in May and August, 1998. Sixteen groups of meiofauna were found at all study sites in the Yeochari tidal flats. Nematodes were the most dominant animal group among the meiofaunal groups as a whole. Sarcomastigophorans, harpacticoid copepods, nauplius larvae of crustaceans and ciliophorans which were also important components of the meiofaunal community. All of these five faunal groups comprised more than 90% of total meiofauna. The maximum total density of meiobenthos was $5.8{\times}10^6ind./m^2$ at the station of sand flat in August and the minimum density was $4.0{\times}10^6ind./m^2$ at same station in May. Biomass of meiobenthos was $1.5g/m^2$(May), $2.3g/m^2$(August) at mud flat and $1.7g/m^2$(May), $2.6g/m^2$(August) at sand flat. At the station of mud flat in May, the highest density was observed within 1cm in depth of upper sediment and steeply decreased increasing depth of sediment. At the sand flat station in August, the highest density was also observed within 1cm in depth of upper sediment and decreased with depth, while the concentration of the animals at the surface was not conspicuous as the mud flat. The value of N/C(nematodes/benthic harpacticoids) ratio was the highest at the station of sand flat in May and the lowest at the sand flat in August.

• International Journal of Concrete Structures and Materials
• /
• v.6 no.2
• /
• pp.111-121
• /
• 2012

The research presented in this paper analytically examines the fire performance of flat plate buildings. The modeling parameters for the mechanical and thermal properties of materials are calibrated from relevant test data to minimize the uncertainties involved in analysis. The calibrated models are then adopted to perform a nonlinear finite element simulation on a flat plate building subjected to fire. The analysis examines the characteristics of slab deflection, in-plane deformation, membrane force, bending moment redistribution, and slab rotational deformation near the supporting columns. The numerical simulation enables the understanding of structural performance of flat plate under elevated temperature and, more importantly, identifies the high risk of punching failure at slab-column connections that may trigger large-scale failure in flat plate structures.

• Korean Journal of Computational Design and Engineering
• /
• v.9 no.2
• /
• pp.102-111
• /
• 2004

In this paper, the efficient layout method for generating common and continuous cutting path of flat-bar profile. The ‘flat -bar’ is a stiffener and has long rectangular shape. This paper describes a fast nesting algorithm of the flat-bar, and a procedure to generate cutting path of gas/plasma torch, which is operated by a NC (numerically controlled) gas/plasma cutting machine. By using this common and continuous path, the machining-time for cutting and the maintenance-cost of plasma-torch could be reduced. Proposed procedures are written in C-language and applied to the Interactive Flat-Bar-Nesting System executable on Open VMS with X-Window system.

• Animal cells and systems
• /
• v.13 no.3
• /
• pp.315-321
• /
• 2009

The growth and estimated production of Acanthogobius flavimanus (1.9${\sim}$24.7 cm TL) were investigated in an eelgrass bed and unvegetated tidal flat of Dongdae Bay, Korea from March 2006 to February 2007. Growth in fish total length was expressed by the von Bertalanffy's growth equation as: $L_t=43.238(1-e^{-03138(t+02507)})$. Estimated densities, biomass, daily and annual production, and P/B ratio were higher at eelgrass bed than those of at unvegetated tidal flat. Monthly variation in daily production was large; the peak numbers occurred in November 2006 ($0.0014g/m^2$/day) at eelgrass bed, whereas was $0.002g/m^2$/day in July 2006 at unvegetated tidal flat. The eelgrass bed has been supported to maintain capacity of higher production of A. flavimanus than those of in unvegetated tidal flat.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.14 no.12
• /
• pp.1084-1091
• /
• 2002

In general, flat-plate solar collectors are generally fixed in place at some angles. The most common method is to orient solar collectors toward the true south, where variations up to 15 degrees east or west are acceptable and the tiIt angle of the collectors is calculated from latitude and different heating applications. However, the best angle of flat-plate collectors depends upon whether the dominant load occurs in the winter, summer, or evenly all year. Moreover, this setting angle must consider the average insolation characteristics of the region exactly. In this study, the setting angle of flat-plate solar collectors is presented for Busan area by using domestic typical meteorological year weather data, so that the fixed flat-plate solar collectors must be set as quantitatively as possible.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.04a
• /
• pp.209-214
• /
• 2002

Mechanical micro-engineering is an easy and cheap way to fabricate micro-structures. If the application of the conventional machining method using flat-end mill becomes available for the micro-manufacturing process, it will be advanced as an extension of the conventional machining process. In this study, micro-grooves cutting using flat-end mill(($\phi$8) was performed. The characteristics on flat-end milling was investigated to improve machinability of micro-grooves. The experiments were performed according to variations of spindle revolution, depth of cut, and feed rate. Machinability through various cutting conditions was evaluated by surface geometry, tool wear, and cutting force. The results show that micro V-grooves of width(pitch) 29${\mu}{\textrm}{m}$ were acquired by flat-end milling. The maximum and minimum roughness of the wall of grooves was 438 and 67nm, respectively