• 한국환경보건학회지
• /
• 제27권4호
• /
• pp.9-14
• /
• 2001

This study was performed to develop the modified FGD(Flue Gas Desulfurization) process which can eliminate the possibility of generating secondary pollutants. Limestone was regenerated by adding ammonium hydroxide and carbon dioxide, and reusing it as a absorbent in FGD gypsum Process. A series of the new or modified FGD process which include desulfurization and regeneration limestone from CaSO$_3$. 1/2H20 and CaSO4 . 2H2O, were carried out under various experimental conditions. The results showed that the optimum injection ratio for regeneration of limestone was 0.3 ml/min of CO2 flow rate, 2 ml of NH4OH per 0.01 M of regent grade CaSO4 . 2H20O and the optimum regeneration temperature was 50. The increaser was the number of times of limestone regeneration, the faster was the breakthrough point of desulfurization at the desulfurination process which the regenerated limestone was used. Then the efficiency of desulrurization was decreased. This study can be confirmed the possibility for reuse of regenerated limestone due to the similarity of desulfurization characteries both reagent grade calcium carbonate and regenerated calcium carbonate. Finally, it appeared that the new technology using regenerated 1imestone can be applied to the FGD process.

• 한국세라믹학회지
• /
• 제52권6호
• /
• pp.479-482
• /
• 2015

The flue gas desulfurization (FGD) process is one of the most effective methods to reduce the amount of $SO_2$ gas (up to 90%) generated by the use of fossil fuel. Limestone is usually used as a desulfurizing agent in the wet-type FGD process; however, the limestone reserves of domestic mines have become exhausted. In this study, limestone sludge produced from the steel works process is used as a desulfurizing agent. Seven different types of additives are also used to improve the efficiency of the desulfurization process. As a result, alkaline additive is identified as the least effective additive, while certain types of organic acids show higher efficiency. It is also observed that the amount of FGD gypsum, which is a by-product of the FGD process, increases with the used of some of those additives.

• 한국세라믹학회지
• /
• 제53권6호
• /
• pp.676-681
• /
• 2016

For the purpose of reducing the amount of limestone, which is used as a desulfurization agent to absorbing $SO_X$ gas in thermal power plants, and to recycle limestone sludge generated from a steel mill, limestone sludge was utilized as a desulfurization agent. In this study, cement, made of flue gas desulfurization (FGD) gypsum obtained in a desulfurization process using limestone sludge, was manufactured then, experiments were conducted to identify the physical properties of the paste and mortar using the cement. The results of the crystal phase and microstructure analyses showed that the hydration product of the manufactured cement was similar to that of ordinary Portland cement. No significant decline of workability or compressive strength was observed for any of the specimens. From the results of the experiment, it was determined that FGD gypsum manufactured from limestone sludge did not influence the physical properties of the cement also, quality change did not occur with the use of limestone sludge in the flue gas desulfurization process.

• 한국대기환경학회지
• /
• 제8권4호
• /
• pp.262-268
• /
• 1992

The trend of international concerns on environmental conservation and domestic demand of ambient air quality improvement, specially on sulfur dioxide level has resulted in the establishment of mid-term strategy of environmental improvement and stepwise strengthening of emission regulations in this decade in Korea. Development of flue gas desulfurization(FGD) process is becoming an essential task to be accomplished especially for the power plants and large industrial facilities. This study is an initial stage researc focusing on the mass transfer principles in wet type FGD process and the effects of operating variables of a jet bubbling scrubber utilizing limestone slurry on sulfur dioxide removal efficiency. Experimental results showed this type of scrubbing system has some advantages in terms of mass transfer mechanism and removal efficiency. More rigorous research is needed for the reaction system and the comparison with existing FGD processess for the possible development of a process which is compatative in view of installation cost and treatment of by-products.

• 한국콘텐츠학회논문지
• /
• 제19권8호
• /
• pp.205-213
• /
• 2019

국내의 많은 중소 디자인 기업들은 기업의 생존과 성장을 목표로 독자적 제품 개발 시도하고 있으나, 이에 성공하는 것은 매우 어렵다. 이러한 원인으로는 제품 기획과 관련된 경험의 부족, 디자인 프로세스의 모범사례로 제시되는 대량의 데이터에 기반한 방법론을 중소기업의 현장에서 실천하는데 있어 현실적 어려움이 있다. 이에 본 연구는 중소 디자인 기업을 위한 방법론으로 사용자 참여 프로세스의 유용성을 제시하였다. 또한 실증적 사례연구로서 중소 디자인 전문기업 P사에서 실시한 사용자 FGD 방법을 제안하였다. 사례연구에서 나타난 프로세스는 다음과 같다. 첫째, 사용자 FGD로 기존 유아욕조의 문제점 도출. 둘째, 사용자 심층인터뷰를 진행하여 다양한 계층의 사용자 의견을 수집. 셋째, 도출 아이디어를 KJ법으로 분석, 유사 요소로 그룹핑. 이를 통하여 사이즈, 재료, 안전, 기존제품 구매요인, 개선방향, 부가요소의 6가지 디자인 방향 및 세부 디자인 콘셉트를 도출하였다. 본 연구는 디자인 프로세스 중 디자인 방향성 설정 단계에 초점을 두고 진행되었다. 본 연구는 사례연구를 통해 P사의 FGD방법을 통한 중소기업 제품 기획 프로세스의 현실적인 검증성, 통합성, 신속성의 제고를 검증하였다. 이는 자본과 인력이 한정적인 중소기업에서 실행할 수 있는 현실적인 프로세스로서 가치가 있다.

• 한국건설순환자원학회논문집
• /
• 제4권2호
• /
• pp.157-164
• /
• 2016

본 연구에서는 고로슬래그 미분말 다량 치환한 시멘트 모르타르의 자극재로 탈황석고(FGD)를 사용한 경우, FGD에 포함되어 있는 활성탄의 제거로 체가름방법과 고온가열 조건을 원분과 비교하고, 또한 골재로서 순환골재(RFA)와 천연골재(NFA)를 사용하는 골재종류 변화 조건에서 각종 품질특성을 검토하였다. 실험결과 FGD의 활성탄 제거방법은 $500^{\circ}C$ 고온가열보다 0.3mm 체가름법이 우수하였고, FGD 치환율은 5~10%일 때, 잔골재는 NFA보다 RFA에서 비교적 양호한 결과를 얻을 수 있었다. 그러나 RFA를 이용한 모르타르의 경우는 실무 활용시 건조수축 길이변화율 및 흡수율 측면에서는 용도제한 및 별도의 품질향상 대책이 요구되었다.

• 한국세라믹학회지
• /
• 제51권6호
• /
• pp.575-583
• /
• 2014

The flue gas desulfurization (FGD) process is currently the most effective process utilized to remove sulfur dioxide from stack gases of coal-fired plants. However, FGD systems use a lot of limestone as desulfurizing agent. In this study, we use limestone sludge, which is a by-product of the steel industry, to replace the desulfurizing agent of the FGD system. The limestone particle size is found to be unrelated to the desulfurizing rate; the gypsum purity, however, is related. Limestone sludge mixes with limestone slurry delivered at a constant rate in a desulfurizing agent with organic acid are expected to lead to a high desulfurization efficiency and high quality by-product (gypsum).

• 자원리싸이클링
• /
• 제25권5호
• /
• pp.44-49
• /
• 2016

배연탈황기술은 화력발전소에 발생하는 $SO_2$ 가스를 제거하기 위한 효과적인 방법이며, 흡수제로 석회석을 사용하고 있다. 본 연구에서는 천연자원인 석회석의 사용량을 저감하고 산업 폐기물의 재활용을 위해, 제철소에서 발생하는 석회석 슬러지를 흡수제로 사용하고자 하였다. 흡수제 원료의 물리 화학적 특성분석을 실시하였으며, 전처리 설비를 구축하여 석회석 슬러지를 사용한 흡수제를 제조한 후 배연탈황 공정에 적용하였다. 제조 흡수제 적용 결과, $SO_2$ 농도 변화상에서의 경향성은 나타나지 않았으며, 흡수탑에서의 운전 제어를 통해 석회석 슬러지를 흡수제로 사용 가능할 것으로 사료되었다.

• 대한산업공학회지
• /
• 제20권3호
• /
• pp.151-166
• /
• 1994

The manufacturing environment on which this research is focused is an FMS in which AGVs are used for material handling and each part type has one or more process plans. The research aims at developing a methodology whereby, given a part and volume mix for production during any production session, the best set of process plans including one plan per part type is selected and the best unidirectional AGV guidepath can be dynamically reconfigured in response to changes in parts and lot sizes combination. For the integrated PPS/FGD problem in which two functions of process plan selection (PPS) and flexible AGV guidepath design (FGD) are integrated, a zero-one integer programming model is developed. The integrated problem is decomposed into two subproblems, process plan selection given a directed AGV layout and AGV guidepath design with a fixed process plan per part type. A heuristic algorithm that alternately and iteratively solves these two subproblems is developed. The effectiveness of the heuristic algorithm is tested by solving various randomly generated sample problems and comparing the heuristic solutions with those obtained by an exact procedure. From the test results, the following conclusions are drawn: 1) For a reasonable size problem, the heuristic is very effective. 2) By integrating the two functions of PPS and FGD, a remarkable benefit in total production time for a given part and volume mix is gained.

• Corrosion Science and Technology
• /
• 제4권4호
• /
• pp.140-146
• /
• 2005

Fossil fired power plant produces the electric energy by using a thermal energy by the combustion of fossil fuels as like oil, gas and coal. The exhausted flue gas by the combustion of oil etc. contains usually many contaminated species, and especially sulfur-content has been controlled strictly and then FGD (Flue Gas Desulfurization) facility should be installed in every fossil fired power plant. To minimize the content of contaminations in final exhaust gas, high corrosive environment including sulfuric acid (it was formed during the process which $SO_2$ gas combined with $Mg(OH)_2$ solution) can be formed in cooling zone of FGD facility and severe corrosion damage is reported in this zone. These conditions are formed when duct materials are immersed in fluid that flows on the duct floors or when exhausted gas is condensed into thin layered medium and contacts with materials of the duct walls and roofs. These environments make troublesome corrosion and air pollution problems that are occurred from the leakage of those ducts. The frequent shut down and repairing works of the FGD systems also demand costs and low efficiencies of those facilities. In general, high corrosion resistant materials have been used to solve this problem. However, corrosion problems have severely occurred in a cooling zone even though high corrosion resistant materials were used. In this work, a new technology has been proposed to solve the corrosion problem in the cooling zone of FGD facility. This electrochemical protection system contains cathodic protection method and protection by coating film, and remote monitoring-control system.