• 전기학회논문지
• /
• 제60권11호
• /
• pp.2035-2042
• /
• 2011

In this paper, we proposed the outer-rotor type of FSPM motor for high speed operation and optimized motor shape. First of all, combinations of pole and slot numbers are examined for the optimal back-EMF and cogging torque, then optimizes the better shape design of the permanent magnet, rotor pole width. Further, The winding turns are obtained by circle of the voltage limit equation and motor parameters to minimize the current and to improve the efficiency. As a result, the performance of the designed model is satisfied, and it is verified through a two-dimensional finite element method (2D-FEA).

• Journal of Electrical Engineering and Technology
• /
• 제13권1호
• /
• pp.307-314
• /
• 2018

In this paper, analytical modeling of lift and drag forces in permanent magnet electrodynamic suspension systems (PM EDSs) are presented. After studying the impacts of PM dimensions on the permanent magnetic field and developed lift force, it is indicated that there is an optimum PM length in a specified thickness for a maximum lift force. Therefore, the optimum PM length for achieving maximum lift force is obtained. Afterward, an objective design optimization is proposed to increase the lift force and to decrease the material cost of the system by using Genetic Algorithm. The results confirm that the required values of the lift force can be achieved; while, reducing the system material cost. Finite Element Analysis (FEA) and experimental tests are carried out to evaluate the effectiveness of the PM EDS system model and the proposed optimization method. Finally, a number of design guidelines are extracted.

• 한국군사과학기술학회지
• /
• 제5권2호
• /
• pp.37-49
• /
• 2002

In this paper, flyout stability of missile that is launched in inclined launcher using sabots is analyzed. To include missile bending motion during flyout, FEA model of missile is converted into eight concentrated mass and equivalent stiffness matrix. Six d.o.f ship motion that have influence on flyout stability is modeled and missile firing time is modeled as probability variable to take arbitrary ship attitude into account. Gap between missile and sabot is modeled as normal distribution probability variable and Monte Carlo simulation is performed. As results, the coriolis acceleration effects by ship motion are analyed and statistical results of missile pitch rate are shown.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2007년도 하계학술대회 논문집
• /
• pp.202-204
• /
• 2007

영구자석을 이용한 다상 브러시리스 전동기의 역기전력의 파형은 정현파나 이상적인 사다리꼴 파형과는 다른 형태를 갖는다. 또한 다상 전동기의 경우 상호인덕턴스에 대한 이론적 해석이 쉽지 않아 시뮬레이션을 위한 모델 구현이 어렵다. 본 논문에서는 임의의 역기전력 파형을 갖는 7상 영구자석 브러시리스 전동기의 시뮬레이션 모델 구현 방법으로 회로 및 수식 을 기반으로 FEA(Finite Element Analysis)를 이용한 모델을 제안하고 시뮬레이션과 실험을 통해 제안된 모델의 타당성을 입증한다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 광주전남지부
• /
• pp.58-62
• /
• 2006

The purpose of this paper is characteristic analysis of permanent magnet generator (PMG) for automatic voltage regulator (AVR)power of brush less synchronous generator. However, this PMG has a spoke type permanent magnet rotor with large overhang for high power density, characteristic analysis considering concentration effect of air-gap flux density due to the overhang should be performed. 30 transient finite element method (FEM)analysis is good solution for overhang parameter, but this method needs too much calculation time. In this paper, we examined the overhang effects based on overhang length and material of rotor core by using 20 and 30 static FEM analysis, and proposed 20 dynamic FEA model considering overhang parameter which gives good and rapid results. The proposed method is verified by the test results of no load, load and short circuit test.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 춘계학술대회 논문집 에너지변화시스템부문
• /
• pp.35-37
• /
• 2009

This paper deals with the static analysis on the permanent magnet synchronous motors(PMSM) using transfer relation theorem according to the shaft materials, and adopts the analytical method to predict the magnetic field distribution and to calculate the electrical parameters by using Transfer Relation Theorem(TRT) in terms of 2-D model in polar coordinates system. In addition, the three types of PMSMS with different types of shafts, which are Iron cored, Air cored, Full-ring permanent magnet type shaft, are suggested in this research, and with those models, not only the analysis on the magnetic field distribution, the estimation of electrical parameters, but also their comparison with Finite Element Analysis(FEA) is processed.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.304-307
• /
• 2003

In this paper, stacked piezoelectric ceramics were used for obtaining a large vibration for a small ultrasonic motor which is useable for the both linear drive and rotational drive. We studied this motor through the finite element analysis method and the simulated driving characteristics were presented. As results, the displacement of the tip of the stator was increased when the layers of the ceramics were increased. Also, by inserting additional aluminum plates between the ceramics and the aluminum bar, the displacement were amplified. In this model, two voltages which have 90 degree phase difference were applied for the bi-directional movement.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.1095-1097
• /
• 2005

This paper deals with an automatic design standard computation based on a rated watt for a synchronous reluctance motor(SynRM). The focus of this paper is making the design relative to the output power on the basis of rotor shape of a SynRM in each rated watt using a coupled FEM & sequential unconstrained minimization technique(SUMT). The coupled finite elements analysis(FEA) & Preisach model have been used to evaluate nonlinear solutions. The proposed procedure allows to define the rotor geometric dimensions according to the rotor diameter and rated watt starting from an existing motor or a preliminary design.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.1261-1263
• /
• 2005

The micro permanent magnet(PM) type stewing motor preferred solution for many small electronics position determination devices since it is small in size. Thus, there are growing demands for PM type stepping motor that greater mechanical output, smaller size. But, the design of the it, having high performance and small size is very difficult because of its complex mechanical structure. This paper deals with a development of the newly structured micro PM type stepping motor with claw-poles. We introduced the small-sized PM type stepping motor that has new structure and analyzed the magnetic characteristic of it versus general type model using 3-D finite element analysis(FEA).

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부A
• /
• pp.28-30
• /
• 1998

In this paper, voltage source FEA considering hysteresis characteristics for a simple electrical system is presented because most electrical machines is used under the voltage sources. The magnetization dependent hysteresis model is used for this analysis and the magnetic materials considered in this simulation are iron core and semi-hard material. For a sinusoidal voltage sourece, we got acceptible current wave form which is calculated.