• 제목/요약/키워드: F240DSP

검색결과 46건 처리시간 0.028초

TMS320F240 칩을 이용한 전동차의 퍼지 주행 제어기에 대한 연구 (Study on Fuzzy Control of Electric Car via TMS320F240)

  • 손진우;최석민;송동국;김종건;배종일;이만형
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1998년도 하계학술대회 논문집 G
    • /
    • pp.2381-2383
    • /
    • 1998
  • 직류직권모터는 전동지게차와 같은 물류용 전동차에서 사용되는데, 우수한 기동 토오크를 가지는 반면에 파라미터의 열적, 변화가 심하고 마찰과 부하의 비선형성이 존재해 기존의 제어기로는 만족할 만한 성능을 내지 못한다. 본 논문에서는 이를 해결하기 위해 퍼지제어기를 사용한다. 퍼지제어기는 변수의 애매성에 바탕을 두고 제어하기 때문에 이러한 비선형성에 대해 강인하나, 소속함수의 결정과 퍼지규칙의 선정이 어려우며, 체계적인 방법이 존재하지 않는다. 이러한 퍼지제 어의 결점을 해결하기 위해 소속함수는 유전 알고리즘을 통해 자기동조 시키며 퍼지규칙은 오차와 오차변화율의 위상평면을 이용하여 결정한다. 실용성을 검증하기 위해 TI사의 DSP TMS320F240을 이용해 실시스템에 적용했으며, 이를 통해 부하의 변동 및 기준 속도의 변화에도 잘 대처함을 알 수가 있었다.

  • PDF

DSP를 이용한 BLDC 전동기의 속도제어에 관한 연구 (A Study On The Speed Control of a BLDC Motor Using DSP)

  • 황동원;김경호;허두석;조윤현
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2003년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
    • /
    • pp.101-103
    • /
    • 2003
  • This paper presents the speed control of Brushless DC Motors using PI control. PI control is implemented by software using digital signal processor(DSP) TMS320F240 from Texas instruments. Considering the cost of BLDC Driver A. B. C phase hall IC's signal is used instead of incremental encoder. The Present paper describes, how to control a speed of BLDC Drive.

  • PDF

DSP 기반 고효율 정밀 속도제어 SRM (High Efficiency and Precise Speed Controlled SRM of DSP based)

  • 김봉철;원태현;안진우
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2004년도 전력전자학술대회 논문집(2)
    • /
    • pp.967-971
    • /
    • 2004
  • The switched reluctance drive is known to provide good adjustable speed characteristics with high efficiency. However, higher torque ripple and lack of the precise speed control are drawbacks. In the paper, a PLL(Phase Locked Loop) technique is adopted to regulate the dwell angle instantaneously. A PLL control technique in conjunction with dynamic dwell angle control scheme has good speed regulation characteristics. The F240 DSP based control system is used to realize this drive system. Test results show that the system has the ability to achieve good dynamic and precise speed control.

  • PDF

DSP를 이용한 SRM 드라이브의 PLL 제어방식에 관한 연구 (Researching to PLL Control-mothod of SRM Drive based on DSP)

  • 표성영;문재원;박한웅;안진우
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 1999년도 전력전자학술대회 논문집
    • /
    • pp.189-192
    • /
    • 1999
  • The switched reluctance drive system is known to provide a good adjustable speed and torque characteristics. However, acoustic noise and higher torque ripple are drawbacks. These drawbacks show the fact that SRM drive is not operated with mmf current specified for dwell angle and input voltage. Reducing torque ripple and having precise speed control, PLL technique is adopted. The PLL system in conjunction with dynamic dwell angle control scheme has good speed regulation characteristics. A TMS320F240 based on the DSP is used to realizing this drive system. Test results show that the system has the ability to achieve good dynamic and precise speed control.

  • PDF

단상 2레벨 스위칭 패턴 데드비트 PWM 인버터의 DSP 제어기 설계 (Design of DSP Controller of Deadbeat PWM Inverter With Two-Level Switching Pattern)

  • 최성관;김호;곽동현;이정복;전희종
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2001년도 전력전자학술대회 논문집
    • /
    • pp.163-166
    • /
    • 2001
  • In this paper, a two-level switching algorithm ov the deadbeat to control PWM inverter is proposed. A modified algorithm of the deadbeat is suitable for the UPS system. Two levels in the pulse pattern are used. This scheme allows the use of higher switching frequency for a given computation time delay, which results in lower total harmonic distortion at the output. The proposed control scheme is implemented using TMS320F240 DSP for controlling on inverter.

  • PDF

PMSM으로 구성된 모터-기구부 시스템의 전달함수 추정에 관한 연구 (A study on Transfer Function Identification of Motor-Mechanical System with PMSM)

  • 박승규;최용권;박두환;안호균
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2002년도 합동 추계학술대회 논문집 정보 및 제어부문
    • /
    • pp.546-549
    • /
    • 2002
  • In this paper, a simulation system, which is almost same with the real motor-mechanical control system, is established. The real system is identified by using the data from DSP(TMS320F240). The RLS(Recursive Least Square) algorithm is used for the identification and MATLAB Simulink program is used for simulation. The exact simulation system obtained by using the proposed method is very useful for analysis and design of motor-mechanical control systems.

  • PDF

DSP제어기, 자이로센서를 이용한 GIMBAL시스템 설계 (The Design of a Direct Driving Gimbal System Using the DSP(TMS320F240) Controller and the Gyroscope)

  • 류정오;최중경;최승진;안기호;박성수
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2001년도 하계종합학술대회 논문집(5)
    • /
    • pp.139-142
    • /
    • 2001
  • This paper presents a design of two gimbal system. One is two axes stabilized platform that is targeted to preserve direction while vehicle that is adhered antiaircraft fire, radar or EOTS is moving. The system maintains stabilization by recovering error using the rate gyro. The other is three axes gimbal system that is intended to simulate various angle movement in space and to test three axes gyroscope. This system determines gyro condition comparing gyro output value with converted motor encoder value.

  • PDF

Design of Deadbeat DSP Controlled PWM Inverter With Two-Level Switching Pattern

  • Choi Seong-Kwan;Park Hae-Won;Kim Soon-Young;Seok Won-Yeob;Jeon Hee-Jong
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
    • /
    • pp.151-154
    • /
    • 2001
  • In this paper, a two-level switching algorithm of the deadbeat to control PWM inverter is proposed. A modified algorithm of the deadbeat is suitable for the UPS system. Two levels in the pulse pattern are used. This scheme allows the use of higher switching frequency for a given computation time delay, which results in lower total harmonic distortion at the output. The proposed control scheme is implemented using TMS320F240 DSP chip for controlling on inverter.

  • PDF

선형 추진 BLDC 모터에 대한 파라미터 추정기법을 이용하는 오토튜닝(Auto Tunning) PI 제어기설계 (The Design of an Auto Tunning PI Controller using Parameter Estimation Method for the Linear BLDC Motor)

  • 차영범;송도호;김진애;최중경
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2005년도 춘계종합학술대회
    • /
    • pp.959-962
    • /
    • 2005
  • 서보 모터는 컴퓨터와 센서로부터 오는 지령에 대해 높은 위치 정밀도와 정확한 속도제어가 가능해 자동화 시스템에서 중요한 부분으로 사용된다. 본 논문에서는 선형추진 BLDC모터로부터 얻어지는 파라메터를 추정하여 정현여자에 의해 구동되는 방식을 제안했다. 파라미터 추정은 제어기의 게인 튜닝과 외란 관측기를 통해 이루어졌다. 이러한 것을 가능하게 하기 위해 DSP(TMS320F240)를 사용하여 시스템을 구성 하였으며 FOC(Field Oriented Control)방식을 적용하였다. 본 시스템에 사용 된 TMS320F240은 A/D Converter와 PWM 발생부, 다수의 IO Port를 내장하고 있어 서보모터 제어에 유용하게 사용될 수 있는 프로세서이다.

  • PDF

디지털 히스테리시스 제어기를 이용한 SRM의 위치제어시스템 (A Position Control System of SRM using Digital Hysteresis Controller)

  • 김민회;백원식;김남훈;최경호;김동희
    • 전력전자학회논문지
    • /
    • 제7권3호
    • /
    • pp.253-261
    • /
    • 2002
  • 본 논문에서는 TMS320F240 DSP를 통해 제어되는 디지털 히스테리시스 제어기를 사용한 Switched Reluctance Motor(SRM)의 위치제어시스템을 제안하였다. SRM은 구조가 간단하고 효율이 놀지만 전동기 구동 특성상 전력용 반도체 소자를 이용한 구동 시스템이 필수적이기 때문에 일반 전동기 제어시스템에 비해 전체 시스템의 제작비용이 증가하게 된다. 이러한 단점을 극복하고 SRM의 활용성을 높이기 위해서는 제어용 드라이브가 필수적으로 요구되는 서보시스템으로서와 SRM 제어시스템을 개발하는 것이다. 따라서 본 연구에서는 시스템 개발과 구현에 있어 아날로그 히스테리시스 제어기를 사용할 경우 하드웨어적인 방법에 의한 파라메타 수정 및 제작의 문제점을 해결하고 전체적인 시스템의 개발단가를 낮추기 위해 DSP내에서의 연산을 통해 제어되는 디지털 히스테리시스 제어기를 설계하여 SRM의 위치제어 시스템을 구현하였으며, 실헐을 통해 제어 및 응답특성을 고찰함으초써 서보 구동 시스템으로서의 SRM의 이용 가능성을 확인하였다.