• Korean Journal of Soil Science and Fertilizer
• /
• 제18권2호
• /
• pp.169-176
• /
• 1985

Six analytial methods for determing the available nitrogen in soils were tested to predict the optimum fertilizer rate for the flue-cured tobacco and to test the fertility level of soils for tobacco. All methods, nitrifiable $NO_3-N$ value for 2 and 4 weeks incubation, UV absorption value at 260nm and N-value in acid digestion of 0.01 M-$NaHCO_3$ extracts, N-value extracted in boiling with $CaCl_2$ solution, and autoclave-extractable $NH_4-N$ value in 0.01 M-$CaCl_2$, were closely correlated with total nitrogen uptake as well as yield. Therefore available nitrogen indices determined from above 6 analysis method could be used for the predicting of tobacco yield without fertilizer, criteria for fertility class, and recommendable range of optimum fertilization.

• Microbiology and Biotechnology Letters
• /
• 제6권1호
• /
• pp.41-46
• /
• 1978

Piscicidal substance produced by Streptomyces sp. isolated from soil was toxic against various kinds of fish. After extraction with CH$Cl_3$ from the culture medium, the substance was purified by avicel column chromatography. In order to test toxicity, various kinds of fish were subjected to the acqueous solution of 100 us of the substance per liter of water. Generally, the substance was toxic to most fish, but Macropodus chinenes and Misgurnus mizolepis are resistant to the substance than Gobius similis and Pseudorasbora parva. The substance was stable at pH range, 3.0 to 7.0, but labile at alkaline pH, and to heat as well. Succinic dehydrogenase on most of tissue cell of Cyprinus carpio was inhibited by this substance strongly, but spinal cord was not inhibited. By addition of Cu and Pb salts to the culture medium, piscicidal substance producibility was activated.

• Journal of Preventive Medicine and Public Health
• /
• 제12권1호
• /
• pp.3-12
• /
• 1979

A survery was carried out in order to know the status of student health service and student medical insurance of universities and colleges in Korea from 1 July to 30 September. 1978. And the following results were obtained; 1. Out of seventy universities and colleges, 54.8% of them had student health service facility such as student health conte. (30.0%) or health room (24.8%). 2. Out of twenty-seven national and public universities and colleges, 44.4% of them had student health service facility and out of forty-three private universities and colleges, 60.5% of them had student health service facilities. 3. Each of 80.0% of 25 universities, 43.3% of 30 colleges and 33.3% of 15 junior colleges had student health service facility. 4. Major roles of student health service were physical examination (92.1%), health counselling (86.8%), primary medical care (78.9%), tuberculosis control (68.4%), insect and rodent control (52.6%), parasite control(47.4%), water source sanitation (44.7%), and dental health care (28.9%). 5. Out of 21 universities and colleges, 66.7% of them had full time doctor and 81.0% of them had full time nurse for student health center. And out of 17 universites and colleges, 5.9% of them had full time doctor and 33.3% of then had full time nurse for student health room. 6. The range of health fee was varied from 100 won to 1,400 won per student per semester and the average was 520 won. 7. Among 55 universities and colleges, 78.6% of them had carried out annual physical examination in 1977 and the rate of physical examination was 57.4%. 8. Out of 70 universities and colleges. 45.7% of them had tuberculosis control program and the prevalence rate was 6.0 per 1,000 students. 9. Student medical insurance program was developed by ten universities and one college among 25 universities and 45 colleges. 10. Student medical insurance benefit was varied according to university and college; the reduction rate of medical fee was 20% to 80% for not only in-patient but also out-patient. 11. The upper limit of pay claim was varied according to the university and college from 5,000 won to no-limitation for out-patient and from 30,000 won to no-limitation for in-patient. 12. The highest utility rate of student medical insurance program was found in university 'F' with the rate of 791 for out-patient and 12 for admitted patient per 1,000 students.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제18권6호
• /
• pp.53-67
• /
• 2017

This study was conducted to investigate the level of physical activity and identify factors influencing physical activity of first and second year nursing students. The participants were 234 female first and second year nursing students at one nursing college located in U city. Data were collected from September 5 to 15 in 2016 and analyzed by descriptive statistics, t-test, ANOVA, $Scheff{\breve{e}}$ test, Pearson's correlation coefficient, and stepwise multiple regression using SPSS/WIN 22.0. The average level of physical activity measured by the Korean version of the Godin-Shephard Liesure-Time Exercise Questionnaire was 9.09(range 0-80). According to the physical activity group classified by leisure score index, there were 25 students(10.7%) in the active group, 31 students (13.2%) in the moderately active group, and 178 students(76.1%) in the insufficiently active group. Factors influencing the level of physical activity were intention to participate in physical activity and habit to physical activity, which together explained 21.2% of the total variance in physical activity. Therefore, this study suggests that it is necessary to develop and apply a physical activity program enhancing intention and habit to physical activity for first and second year nursing students.

• Journal of Radiation Protection and Research
• /
• 제31권4호
• /
• pp.181-186
• /
• 2006

A radiophotoluminescent glass rod detector (GRD) system has recently become commercially available. We investigate the dosimetric properties of the GRD regarding the reproducibility of signal, dose linearity and energy dependence. The reproducibility of five measurements for 50 GRDs is presented by an average of one standard deviation of each GRD and it is ${\pm}1.2%$. It is found to be linear in response to doses of $^{60}Co$ beam in the range 0.5 to 50 Gy with a coefficient of linearity of 0.9998. The energy dependence of the GRD is determined by comparing the dose obtained using cylindrical chamber to that by using the GRD. The GRD response for each beam is normalized to the response for a $^{60}Co$ beam. The responses for 6 and 15 MV x-ray beams are within ${\pm}1.5%$ (1SD). The energy response of GRD for high-energy photon is almost the same as the energy dependence of LiF:Mg:Ti (TLD-100)and shows little energy dependence unlike p-type silicon diode detector. The GRDs have advantages over other detectors such diode detector, and TLD: linearity, reproducibility and energy dependency. It has been verified to be an effective device for small field dosimetry for stereotactic radiosurgery.

• Asian Pacific Journal of Cancer Prevention
• /
• 제17권4호
• /
• pp.2093-2097
• /
• 2016

Background: HCV is a major global health problem. IL-27 is a member of the IL-6/IL-12 cytokine family with a broad range of anti-inflammatory properties. Recent studies highlighted the effect of a SNP in the IL-27 promoter region on modulating the progression of infectious diseases and individual responses to therapy. Aim of the work: The present study investigated the potential role of (-964 A/G) SNP in the promoter region of IL-27p28 gene (alleles rs153109) on the outcome of HCV infection among genotype 4a infected patients. Materials and Methods: HCV genotyping confirmed that all of the HCV-infected patients had genotype 4a infection. Genomic DNA was extracted from 111 patients with chronic HCV infection, 42 spontaneous resolvers (SR) and 16 healthy controls. IL- 27p28.rs153109 genotyping was assessed using PCR-RFLP then confirmed by DNA sequencing. Results: The frequency of IL-27-p28.rs153109AA, AG, and GG genotypes among chronically infected subjects were 74.8 %, 25.2%, and 0% while among the SR, they were 57.1%, 35.7%, and 7.14%, respectively. Our data show the unique presence of G/G genotype in the SR group (3 patients; 7.14%). Moreover, the "G" allele frequencies among chronic and resolved subjects were 12.6% and 25.0%, respectively (p=0.0136). Importantly, subjects with the GG genotype were more likely to clear their HCV infection than those with the AA genotype (p=0.0118). Conclusions: HCV genotype 4a subjects with the IL-27-p28.rs153109 A/G and G/G genotype were more likely to clear their HCV infection. Therefore, we propose IL- 27p28.rs153109SNPas a genetic biomarker for predicting HCV infection outcome.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• 제26권1호
• /
• pp.38-47
• /
• 2016

Objectives: The objective of this study was to determine the exposure levels of forklift operators to diesel engine exhaust(DEE) using black carbon(BC), elemental carbon(EC), and nitrogen dioxide($NO_2$) as indicators. Methods: A total of eight forklift operators in six collection companies were assessed over a period of two months from July to September 2015. BC was measured using a real-time monitor and respirable EC samples were analyzed using the NIOSH method 5040. $NO_2$ samples were collected using a passive badge-type sampler. Results: The geometric mean of BC, EC and $NO_2$ were $3.1-19.1{\mu}g/m^3$, $2.1-23.8{\mu}g/m^3$, and 12.5-166.6 ppb at all companies. When forklifts were operating both outside and inside, BC concentrations increased 2.0-5.6 times. The highest increase was observed when forklifts were operating indoors. The increase in BC concentrations varied by company(company A: 2.0 times, B: 3.2 times, C: 5.6 times, D: 2.1 times, E: 5.1 times, F: 2.6 times). The geometric mean of BC, EC, and $NO_2$ for the forklift operators was $9.6{\mu}g/m^3$, $7.9{\mu}g/m^3$, and 48.9 ppb, respectively. The geometric mean of BC, EC, and $NO_2$ for manufacturing workers was $9.3{\mu}g/m^3$, $0.9{\mu}g/m^3$, and 85.2 ppb, respectively. The mean BC and EC exposure levels for the forklift operators were slightly higher than those for manufacturing workers, but $NO_2$ levels for manufacturing workers were higher than those for the forklift operators(p>0.05). Multiple regression analysis revealed that diesel exhaust emissions standard, forklift weight and forklift manufacturer were the most influential factors in determining worker exposure. Conclusions: In the DEE work environment, workers who perform tasks within the workplace as well as inside forklifts as operators are likely to be exposed to a lack of ventilation. Further study of forklift operators' exposure to DEE indicators should be conducted to include a wider range of occupational and environmental situations, such as collection procedures, seasonal situations, types of fuel used, and number of forklifts.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• 제26권1호
• /
• pp.38-43
• /
• 2013

In this study we aims to examine the effects of $Co_3O_4$ and NiO doping on the defects and electrical properties in ZnO-$Bi_2O_3-Sb_2O_3$ (Sb/Bi=0.5) varistors. It seemed to form ${Zn_i}^{{\cdot}{\cdot}}$(0.20 eV) and ${V_o}^{\cdot}$(0.33 eV) as dominant defects in Co and Ni co-doped ZBS system, however only ${V_o}^{\cdot}$ appeared in Co- or Ni-doped ZBS. Even though the same defects it was different in capacitance (1.5~4.5 nF) and resistance ($0.3{\sim}9.5k{\Omega}$). The varistor characteristics were improved with Co and Co+Ni doping (non-linear coefficient, ${\alpha}$= 36 and 29, relatively) in ZBS. The various parameters ($N_d=1.43{\sim}2.33{\times}10^{17}cm^{-3}$, $N_t=1.40{\sim}2.28{\times}10^{12}cm^{-2}$, ${\Phi}b$=1.76~2.37 V, W= 98~118 nm) calculated from the C-V characteristics in our systems did not depend greatly on the type of dopant, which were in the range of a typical ZnO varistors. It should be derived a improved C-V equation carefully for more reliable parameters because the variation of the varistor capacitance as a function of the applied dc voltage is depend on the defect, frequency, and temperature.

• Journal of the Korean Society of Clothing and Textiles
• /
• 제15권2호
• /
• pp.199-209
• /
• 1991

In this paper, the fabrics for Korean folk clothes(KFC) undergoes repeated laundering under given condition. After this cyclic laundering was applied, the mechanical properties of the specimen were measured using KES-F system in order to evaluated the end-use performance of fabrics for KFC. And also, the crease recovery of fabrics for KFC were measured by shirley crease recovery tester. 78 different kinds of commercial silk fabrics and polyester fabrics for KFC were used for this study. The experimental results were analysed statistically to relate the mechanical properties and the crease recovery of fabrics for KFC. Furthermore, these changes in dimensional stability, mechanical properties and handle of fabrics for KFC were discussed in comparison with those values for silk fabrics and polyester fabrics. The results obtained are as follows. 1. Regardless of materials, remarkable increase are observed in shrinkage of the fabrics for KFC about repeated laundering, but dull increase are observed in shrinkage after 10 cycles of the repeated laundering. On the other hand, slack extend are observed in dimensions after 20 cycles of the repeated laundering. The shrinkage of fabrics for KFC after 10 cycles of the lundering showed that the silk fabrics are $1.74{\pm}0.33\%$ (warp direction) and $1.35{\pm}0.23\%$ (weft direction) and the polyester fabrics are $1.45{\pm}0.22\%$ (warp direction) and $1.25{\pm}0.23\%$ (weft direction). 2. Except for tensile property, these changes in mechanical properties of fabrics for KFC by laundering have $\pm$ 16 range of bending, shearing, compression, surface, thickness & weight as compared with before laundering. Particularly, the LT and RT about $1\~3$ cycles of the repeated laundering showed remarkable decrease. And SMD, WC, T & W of fabrics for KFC by the laundering were more increased than one for original fabrics. But B, 2HB, G, 2HG, 2HGS were decreased more than one for original fabrics. 3. 'Stiffness', 'Anti-drape', 'Crispness' and 'Scroop' hand values decrease and'Fullness & softness', 'Flexibility & softness' hand values increase with repeated laundering. 4. Remarkable decrease are observed in crease recoveries about $1\~5$ cycles of the repeated lundering, but slack decrease are observed in crease recoveries after 5 cycles of repeated laundering. The crease recovery of fabrics for KFC have negative(-) correlation with LT, RT, G, RC and MMD, This fact implies that the smaller these values, the larger the crease recovery. The crease recovery of fabrics for KFC has a high degree of correlation with the mechanical properties such as shearing, compression, surface property. And also, the crease recovery are expected by measuring the mechanical properties such as G, 2HG, 2HGS, RC, WC, LC, MIU, MMD and SMD, according to the obtained regression equation.

• Korean Chemical Engineering Research
• /
• 제49권5호
• /
• pp.664-668
• /
• 2011

Spherical alumina precursors represented by $AlO_xCl_y(OH)_z$, 30~200 nm in particle diameter, were prepared by partial hydrolysis of $AlCl_3$ vapor in a 500 ml reactor. Investigated on the particle morphology and size were the effects of the reaction time, the stirring speed and the reaction temperature. The particle morphology and size was insensitive to the reaction time in the range 20 to 300 s. The variation of the stirring speed from 0 to 300 and 800 rpm showed that the particle size was the largest at 0 rpm. As the temperature was varied from 180 to 190, 200, $140^{\circ}C$, the particle size showed a maximum at $190^{\circ}C$. By calcination of the as-produced particles at $1,200^{\circ}C$ for 6h with a heating rate of $10^{\circ}C$/min, ${\alpha}$-alumina particles 45 nm in surface area equivalent diameter were obtained. The particle shape after calcination turned wormlike due to sintering between neighboring particles. A rapid calcination at $1400^{\circ}C$ for 0.5 h with a higher heating rate of $50^{\circ}C$/min reduced the sintering considerably. An addition of $SiCl_4$ or TMCTS(2,4,6,8-tetramethylcyclosiloxane) to the $AlCl_3$ reduced the sintering effectively in the calcination step; however, peaks of ${\gamma}$ or mullite phase appeared. An addition of $AlF_3$ to the particles obtained from the hydrolysis resulted in a hexagonal disc shaped alumina particles.