• Asian-Australasian Journal of Animal Sciences
• /
• 제26권8호
• /
• pp.1119-1126
• /
• 2013

The objective of this study was to compare the goodness of fit of four lactation curve models: Wood's Gamma model (WD), Wilmink (WL), and Pollott's multiplicative two (POL2) and three parameters (POL3) and to determine the environmental factors affecting the complete lactation curve of F1 dairy sheep under organic management. A total of 5,382 weekly milk yields records from 150 ewes, under organic management were used. Residual mean square (RMS), determination coefficients ($R^2$), and correlation (r) analysis were used as an indicator of goodness of fit for each model. WL model best fitted the lactation curves as indicated by the lower RMS values (0.019), followed by WD (0.023), POL2 (0.025) and POL3 (0.029). The four models provided total milk yield (TMY) estimations that were highly correlated (0.93 to 0.97) with observed TMY (89.9 kg). The four models under estimated peak yield (PY), whereas POL2 and POL3 gave nearer peak time lactation estimations. Ewes lambing in autumn had higher TMY and showed a typical curve shape. Higher TMY were recorded in second and third lambing. Season of lambing, number of lambing and type of lambing had a great influenced over TMY shaping the complete lactation curve of F1 dairy sheep. In general terms WL model showed the best fit to the F1 dairy sheep lactation curve under organic management.

• 대한수학회지
• /
• 제59권2호
• /
• pp.353-365
• /
• 2022

Let 𝓐 be the collection of analytic functions f defined in 𝔻 := {ξ ∈ ℂ : |ξ| < 1} such that f(0) = f'(0) - 1 = 0. Using the concept of subordination (≺), we define $$S^*_{\ell}\;:=\;\{f{\in}A:\;\frac{{\xi}f^{\prime}({\xi})}{f({\xi})}{\prec}{\Phi}_{\ell}(\xi)=1+{\sqrt{2}{\xi}}+{\frac{{\xi}^2}{2}},\;{\xi}{\in}{\mathbb{D}}\}$$, where the function 𝚽_ℓ(ξ) maps 𝔻 univalently onto the region Ω_ℓ bounded by the limacon curve (9u² + 9v² - 18u + 5)² - 16(9u² + 9v² - 6u + 1) = 0. For 0 < r < 1, let 𝔻_r := {ξ ∈ ℂ : |ξ| < r} and 𝒢 be some geometrically defined subfamily of 𝓐. In this paper, we find the largest number 𝜌 ∈ (0, 1) and some function f₀ ∈ 𝒢 such that for each f ∈ 𝒢 𝓛_f (𝔻_r) ⊂ Ω_ℓ for every 0 < r ≤ 𝜌, and $${\mathcal{L} _{f_0}}({\partial}{\mathbb{D}_{\rho})\;{\cap}\;{\partial}{\Omega}_{\ell}\;{\not=}\;{\emptyset}$$, where the function 𝓛_f : 𝔻 → ℂ is given by $${\mathcal{L}}_f({\xi})\;:=\;{\frac{{\xi}f^{\prime}(\xi)}{f(\xi)}},\;f{\in}{\mathcal{A}}$$. Moreover, certain graphical illustrations are provided in support of the results discussed in this paper.

• Elastomers and Composites
• /
• 제53권4호
• /
• pp.213-219
• /
• 2018

The degradation mechanism and physical properties of an FKM O-ring were observed with thermal aging in this experiment. From X-ray photoelectron spectroscopy (XPS) analysis, we could observe carbon (285 eV), fluoro (688 eV), and oxygen (531 eV) peaks. Before thermal aging, the concentration of fluoro atoms was 51.23%, which decreased to 8.29% after thermal aging. The concentration of oxygen atoms increased from 3.16% to 20.39%. Under thermal aging, the FKM O-ring exhibited debonding of the fluoro-bond by oxidation. Analysis of the C1s, O1s, and F1s peaks revealed that the degradation reaction usually occurred at the C-F, C-F2, and C-F3 bonds, and generated a carboxyl group (-COOH) by oxidation. Due to the debonding reaction and decreasing mobility, the glass transition temperature of the FKM O-ring increased from $-15.91^{\circ}C$ to $-13.79^{\circ}C$. From the intermittent CSR test, the initial sealing force was 2,149.6 N, which decreased to 1,156.2 N after thermal aging. Thus, under thermal aging, the sealing force decreased to 46.2%, compared with its initial state. This phenomenon was caused by the debonding reaction and decreasing mobility of the FKM O-ring. The S-S curve exhibited a 50% increase in modulus, with break at a low strain and stress state. This was also attributed to the decreasing mobility due to thermal aging degradation.

• Restorative Dentistry and Endodontics
• /
• 제22권1호
• /
• pp.396-412
• /
• 1997

The purpose of this study is to observe the corrosion characteristics of five dental amalgams(CAULK FINE CUT, OPTALLOY II, DISPERSALLOY, TYTIN, and VALIANT) in the solutions with fluoride compound through the anodic polarization curve obtained by using a potentiostat. After each amalgam alloy and Hg being triturated, the triturated mass was inserted into the cylindrical metal mold, and condensed by hydraulic pressure(160 kg/$cm^2$). Each specimen was removed from the metal mold. Specimens were polished with the silicone carbide grinding paper 24 hours after condensation and stored at room temperature for 1 week. The anodic polarization curves were employed to compare the corrosion behaviours of the amalgams in 0.9 % saline solution and in the saline solutions with 2.2 ppm, 0.05 %, 2 % NaF, and 8 % $SnF_2$ at $37^{\circ}C$ with 3-electrode potentiostat. After the immersion of specimen in electrolyte for 30 minutes, the potential scan was begun. The potential scan range was -1500m V to + 800m V(vs. S.C.E.) in the working electrode and the scan rate was 50 mV/sec. The results were as follows, 1. The corrosion potential, the potential of anodic current peak, and transpassive potential in the saline solutions with NaF shifted to lower direction than those in normal saline solution, and the current density in the saline solutions with NaF was higher than that in normal saline solution. The differences were increased as the concentrations of NaF became higher. 2. The corrosion potential and transpassive potential in the saline solution with $SnF_2$ shifted to higher direction than those in normal saline solution, and the current density in the saline solution with $SnF_2$ was higher than that in normal saline solution after the corrosion potential. The anodic polarization curves in the saline solution with $SnF_2$ had no outstanding anodic current peak. 3. The corrosion potentials for high-copper amalgams were much higher than those for CAULK FINE CUT and OPTALLOY II in normal saline solution, but, as the concentrations of fluoride compound became higher, the differences in corrosion potentials between them were decreased. The corrosion potentials had the similarity in the saline solution with 2% NaF or 8% $SnF_2$. 4. The current density for TYTIN was the lowest among the others in normal saline solution and in the saline solution with 2.2 ppm or 0.05 % NaF. 5. There was no significant difference in current density between Pd-enriched VALIANT and other high-copper amalgams.

• 한국반도체및디스플레이장비학회:학술대회논문집
• /
• 한국반도체및디스플레이장비학회 2005년도 추계 학술대회
• /
• pp.102-105
• /
• 2005

In this study Al electrode for OLED was deposited by FTS(Facing Targets Sputtering) system which can deposit thin films with low substrate damage. The Al thin films were deposited on the cell (LiF/EML/HTL/Bottom electrode) as a function of working gas such as Ar, Kr or mixed gas. Also Al thin films were prepared with working gas pressure (1, 6 mTorr ). The film thickness and I-V curve of Al/cell were evaluated by $\alpha$-step and semiconductor parameter (HP4156A) measurement.

• Applied Biological Chemistry
• /
• 제36권4호
• /
• pp.310-314
• /
• 1993

HPLC를 이용하여 fructose oligomer인 fructo올리고당(GF2-GF7) 및 inulo올리고당(F2-F4)의 분리, 정량을 실시하였다. TSK-gel amide 80 column과 acetonitrile-water(65:35; v/v) 용매를 사용하여 각 표준당들을 효과적으로 분리할 수 있었으며 이들의 retention time은 분석시마다 거의 변하지않아 재현성이 있었다. 각 당의 농도에 따른 peak면적을 이용하여 표준곡선을 작성한 결과 넓은 당량의 범위에 걸쳐 결정계수가 0.9884이상의 값을 보여 본 HPLC방법에 의한 정량법이 타당한 것으로 나타났다. 또한 기울기는 비슷하나 y축 절편 값이 당마다 크게 상이하여 몇가지 표준당들을 기준으로 하여 모든 당을 일률적으로 정량하는 것은 적합하지 않으며 각 당에 대한 표준곡선을 하나씩 작성하여 정량하여야함을 알 수 있었다.

• 대한전기학회논문지
• /
• 제45권1호
• /
• pp.1-8
• /
• 1996

Recently, much attention has been paid to problems which is concerned with voltage instability phenomena and much works on these phenomena have been made. In this paper, by substituting d $P_{k}$ d $e_{k}$ ( $v^{\rarw}$= e +j f) for $P_{k}$ in conventional load flow, direct method for finging the limit of voltage stability is proposed. Here, by using the fact that taylor se- ries expansion in .DELTA. $P_{k}$ and .DELTA. $Q_{k}$ is terminated at the second-order terms, constraint equation (d $P_{k}$ d $e_{k}$ =0) and power flow equations are formulated with new variables .DSLTA. e and .DELTA.f, so partial differentiations for constraint equation are precisely calculated. The fact that iteratively calculated equations are reformulated with new variables .DELTA.e and .DELTA.f means that limit of voltage stability can be traced precisely through recalculation of jacobian matrix at e+.DELTA.e and f+.DELTA.f state. Then, during iterative process divergence may be avoid. Also, as elements of Hessian mat rix are constant, its computations are required only once during iterative process. Results of application of the proposed method to sample systems are presented. (author). 13 refs., 11 figs., 4 tab.

• 산업식품공학
• /
• 제15권1호
• /
• pp.22-27
• /
• 2011

본 연구에서는 강원도 춘천지역에서 발생하는 환경 오폐수를 시료로 하여 미생물을 혼합하여 제조한 수질정화제를 실제 하천과 호수의 오염환경과 유사한 배양기내에서 생물학적반응을 시켜오염물질의정화정도를측정하고평가하였다. 사용된 미생물은 식물성 유산균(vegetable Lactobacillus fermentum), 효모(Saccharomyces cerevisiae)와 고초균(Bacillus subtilis)이다. 두가지의미생물혼합제를투입하여정화정도를 실험하였다. 실제 하천에 투입하여 정화되는 과정과 유사하게 반응을 시키고자 반응 온도는 $21({\pm}3)^{\circ}C$로 하였으며 완전교반을 진행하였다. 사용한 시료의 오폐수의 오염도와 미생물에 의한 정화정도를 평가하기 위하여 총질소 함량과 총인 함량을 측정하였다. V.L.F.와 S.C.의 혼합물로 구성된 혼합제의 경우 총질소함량을 감소시키는데 매우 효과적임을 보여주었으며, V.L.F., S.C.,와 B.S.로 구성된 혼합제의 경우 그 총인의 함량을 저감화하는데 효과적임을 알 수 있었다. 본 실험에서 얻어진 실험 데이터를 통하여 V.L.F.와 S.C.의 혼합제가 오폐수의 정화반응에서 나타나는 반응상수값을 도출하였으며 그 값은 0.178 $day^{-1}$이었다. 본 연구의 결과를 바탕으로 저감화하고자 하는 성분에 따라 미생물의 종류와 그 혼합비를 조절하는 최적화과정이 필수적임을 알 수 있었으며 또한 곡선적합으로 도출한 반응상수값은 미생물을 이용하여 호수와 하천의 정화정도를 simulation함에 필요한 실험인자로서 응용이 가능하게 되었다.

• 반도체디스플레이기술학회지
• /
• 제6권4호
• /
• pp.11-15
• /
• 2007

As preparing electrode for the OLED with the sputtering process, in order to be lower damage of the bottom organic layer and increase the life-time of the OLED, we prepared Al electrode for that by using Facing Targets Sputtering (FTS) system. Al electrode directly deposited on the cell (LiF/EML/HTL/Bottom electrode). Deposition condition was the working gas (Ar, Kr and Ar+Kr) and working gas pressure (1 and 6 mTorr). The film thickness and I-V curve of Al/cell were evaluated by a $\acute{a}$-step profiler and a semiconductor parameter (HP4156A) measurement. The thin film surface image was observed by a Atomic Force Microscope (AFM). In result, in comparison with about 11 [V] of the turn-on voltage of Al/cell with using the pure Ar gas, when Al thin film was deposited using the Ar-Kr mixture gas, the surface morphology was improved in some region and the turn-on voltage of Al/cell could be decreased to about 7 [V].

• 수산해양기술연구
• /
• 제26권1호
• /
• pp.8-13
• /
• 1990

LiF(Mg, Cu, P) 단결정의 미시적 이완매개변수와 유전손실 등을 구하기 위하여 TSD glow곡선을 측정하고, 측정된 glow곡선을 초기상승법, 가열율법 및 전면적법으로 해석하였다. 쌍극자의 이완시간 $\tau$, pre-exponential인자 $\tau$하(o) 및 활성화에너지E는 각각 12.19S, 1.97$\times$10 상(-12)S 및 0.55eV이었다. 또한 TSD glow곡선을 사용하여 온도영역 300k~340k 사이에서 구한 LiF(Mg, Cu, P)단 결정의 tan$\delta$값은 약 3$\times$10 상(-2)이었다.