• Bulletin of the Korean Mathematical Society
• /
• v.46 no.1
• /
• pp.25-33
• /
• 2009

Let ${\pi}:E{\rightarrow}B$ be a Serre fibration with fibre F. We prove that if the inclusion map $i:F{\rightarrow}E$ has a left homotopy inverse r and ${\pi}:E{\rightarrow}B$ admits a cross section ${\rho}:B{\rightarrow}E$, then $G_n(E,F){\cong}{\pi}_n(B){\oplus}G_n(F)$. This is a generalization of the case of trivial fibration which has been proved by Lee and Woo in [8]. Using this result, we will prove that ${\pi}_n(X^A){\cong}{\pi}_n(X){\oplus}G_n(F)$ for the function space $X^A$ from a space A to a weak $H_*$-space X where the evaluation map ${\omega}:X^A{\rightarrow}X$ is regarded as a fibration.

• Asian-Australasian Journal of Animal Sciences
• /
• v.5 no.3
• /
• pp.481-485
• /
• 1992

In order to upgrade native sheep, Rambouillet (R) rams were mated to Kaghani (K) ewes to generate F1 ($R{\times}K$) crossbred ewes. Crossbred ewes were backcrossed to Rambouillet rams to produce B1 ($R{\times}F1$), B2 ($R{\times}B1$) and B3 ($R{\times}B2$) genotypes. Weaning weight of 2605 lambs and wool weight of 2378 mature ewe records, representing R, K, F1, B1, B2 and B3 genotypes, were analyzed to compare genetic variation among genotypes produced during upgrading process and identify genotypes of the highest performance. Performance of Rambouillets was also evaluated under semi-temperate climate. Data were adjusted for yearly variation considering Rambouillet as a control. Genotypes influenced lambs weaning weight (p<.01). B1 lambs were heaviest (18.4 kg) followed in order by B2, F1, B3, R and K lambs (18.3, 17.9, 16.9, 16.8 and 13.2 kg, respectively). The highest wool production was 2.5 kg from R ewes followed by B2 (2.3), B3 (2.3), F1 (2.0) and K (1.2) ewes (p < .01). Ewe mating weight, reproduction, growth and wool production of Rambouillets deteriorated significantly after the first decade of their importation. Compared with the first phase (1959-1971), ewe mating weight, litter size, birth weight, lamb weaning weight and wool production declined by 20, 23, 32 and 36%, respectively, in the second phase (1972-1988).

• Fibers and Polymers
• /
• v.3 no.1
• /
• pp.8-13
• /
• 2002

The effect of block sequence on the self-assembly of ABC-type triblock copolymers in the ordered state is investigated using an isothermal-isobaric molecular dynamics simulation. The block sequence has an important effect ,on the ]norphology of ABC triblock copolymers. Different morphologies are observed depending on the block sequence as well as the block composition. The triblock copolymers with the volume fraction of 1 : 1 : 1 ($f_A$=$f_B$=$f_C$= 0.33) show the three phase and four layered lamellar structures irrespective of the block sequence. The $A_{32}$$B_{16}$$C_{32}$triblock copolymer with $f_B$=0.2 shows a morphology In which cylinders of midblock B are formed at the interface between A and C lamellae, whereas the morphology of triblock copolymer $B_{16}$$C_{32}$ $A_{32}$ and $C_{32}$ $A_{32}$ $B_{16}$ show a cylindrical core-shell structure and a lamellar type morphology, respectively. The $A_{20}$$B_{40}$$C_{20}$the triblock copolymer with the block B as a major component shows a tricontinuous structure, whereas both $B_{40}$$C_{20}$$A_{20}$ and $C_{20}$$A_{20}$$B_{40}$ triblock coolymers exhibit the lamellar structures. When the block B has larger volrome fraction with $f_B$=0.75, the matrix is composed of block B, and other two blocks A and C form spherical domains.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.5
• /
• pp.513-520
• /
• 2003

In this paper, a novel design concept of frequency doubler using feedforward technique and DGS microstrip line is proposed. The feedforward loop plays a role of fundamental frequency suppression and DGS microstrip line suppresses over the 3rd order harmonic components. By using this new concept, the high suppression for the undesired signals could be achieved easily. The proposed technique is experimentally demonstrated in 1.87 GHz-to-3.74 GHz frequency doubler. The output power of -3 dBm at the frequency of 3.74 GHz(2f$\_$0/) is measured with 42.9 dB suppression of the fundamental frequency signal(f$\_$0/), 20.2 dB suppression of the 3rd harmonic signal(3f$\_$0/) and B9.7 dB suppression of the 4th harmonic signal(4f$\_$0/). The conversion loss of -2.34 dB ∼ -5.8 dB at the bandwidth of 100 MHz, the phase noise of -97.51 dB/Hz(＠10 kHz) were measured.

• Journal of Sensor Science and Technology
• /
• v.24 no.3
• /
• pp.181-187
• /
• 2015

The magnetoelectric characteristics on layered $Fe_{78}B_{13}Si_9/PZT$ and $Fe_{78}B_{13}Si_9/PZT/Fe_{78}B_{13}Si_9$($t_m=0.017$, 0.034mm) composites by epoxy bonding for magnetic field sensor were investigated in the low-frequency range and resonance frequency range. The optimal bias magnetic field $H_{dc}$ of these samples was about 23~63 Oe range. The Me coefficient of $Fe_{78}B_{13}Si_9/PZT/Fe_{78}B_{13}Si_9(t_m=0.034mm)$ composites reaches a maximum of $186mV/cm{\cdot}Oe$ at $H_{dc}=63Oe$, f=50 Hz and a maximum of $1280mV/cm{\cdot}Oe$ at $H_{dc}=63Oe$, resonance frequency $f_r=95.5KHz$. The output voltage shows linearity proportional to ac fields $H_{ac}$ and is about U=0~130.6 mV at $H_{ac}=0{\sim}7Oe$, f=50 Hz, U=0~12.4 V at $H_{ac}=0{\sim}10Oe$, $f_r=95.5KHz$(resonance frequency). The optimal frequency(f=50 Hz) of this sample is around the utility ac frequency(f=60 Hz). Therefore, this sample will allow for ac magnetic field sensor at utility frequency and low bias magnetic fields $H_{dc}$.

• Journal of the Korean Mathematical Society
• /
• v.47 no.6
• /
• pp.1147-1165
• /
• 2010

In this paper we compare a torsion free sheaf F on $P^N$ and the free vector bundle $\oplus^n_{i=1}O_{P^N}(b_i)$ having same rank and splitting type. We show that the first one has always "less" global sections, while it has a higher second Chern class. In both cases bounds for the difference are found in terms of the maximal free subsheaves of F. As a consequence we obtain a direct, easy and more general proof of the "Horrocks' splitting criterion", also holding for torsion free sheaves, and lower bounds for the Chern classes $c_i$(F(t)) of twists of F, only depending on some numerical invariants of F. Especially, we prove for rank n torsion free sheaves on $P^N$, whose splitting type has no gap (i.e., $b_i{\geq}b_{i+1}{\geq}b_i-1$ 1 for every i = 1,$\ldots$,n-1), the following formula for the discriminant: $$\Delta(F):=2_{nc_2}-(n-1)c^2_1\geq-\frac{1}{12}n^2(n^2-1)$$. Finally in the case of rank n reflexive sheaves we obtain polynomial upper bounds for the absolute value of the higher Chern classes $c_3$(F(t)),$\ldots$,$c_n$(F(t)) for the dimension of the cohomology modules $H^iF(t)$ and for the Castelnuovo-Mumford regularity of F; these polynomial bounds only depend only on $c_1(F)$, $c_2(F)$, the splitting type of F and t.

• Journal of the Korean Chemical Society
• /
• v.11 no.1
• /
• pp.12-16
• /
• 1967

Fading of Chlorantine Fast Red 5B (C.I. Direct Red 81) on cotton fabric exposed to carbon are light was examined. It was observed that the dye had anomaly in CF curve slope, while normal in CFG one. Auther considered that the reason for discrepancy of the one with the other curve slope might be appeared from Weber-Fechner law, and derived following equation $F_v=[logC_0-log(C_0-C_0F_t/100)]{\times}100/(logC_0+b)$ where $F_t$; the proportion of dye faded after t hour exposure. $F_v$; the proportion of dye faded after t hour exposure, when a pattern is judged by visual method $C_0$; initial dye concentration. b; constant. also, the reason for increasing lightfastness with dye concentration was discussed on view of the above equation.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.8 no.1
• /
• pp.77-80
• /
• 2004

For the development of the alternative control system against the major forest pests, Beauveria spp. F-101, isolated from a dead larva of Thecodiplosis japonensis, was selected because this isolate showed high pathogenicities against T. japonensis and Acantholyda parki. Beauveria spp. F-101 had irregular clustered conidio-phores and conidia borne on a distinctive apical zigzag extension, and it showed typical characteristic of the genus, Beauveria in morphology. For molecular based-identification, the ribosomal ITS region of Beauveria spp. F-101 was amplified with ITS1 and ITS4 primers, and cloned into pGEM- T Easy vector. The amplified PCR product was 569 bp in size and completely sequenced. The similarities of the cloned ITS sequence were 99 ％ and 97％ to those of B. bassiana and B. brongniartii, respectively. In comparison to other species among the genus Beauveria, the ITS region of Beauveria spp. F-101 showed a similarity of 95％ to B. amorpha, 95％ to B. tenella, 89％ to B. vermiconia and 69％ to B. alba, respectively. In addition, in comparison to different genus, it had 95％ similarities to Cordyceps militaris and 91％ to Paecilomyces tenuipes. Accordingly, the current result suggests that Beauveria spp. F-101 was a variant of B. bassiana and it seems to be a new isolate considering sequence variation in ITS region.

• Journal of Mechanical Science and Technology
• /
• v.18 no.11
• /
• pp.1932-1940
• /
• 2004

Although the previous researches evaluated the fatigue behavior of Al/GFRP laminates using the traditional fracture mechanism, their researches were not sufficient to do it : the damage zone of Al/GFRP laminates was occurred at the delamination zone instead of the crack-metallic damages. Thus, previous researches were not applicable to the fatigue behavior of Al/GFRP laminates. The major purpose of this study was to evaluate delamination behavior using the relationship between crack length (a) and delamination width (b) in Al/GFRP laminate. The details of investigation were as follows: 1) Relationship between the crack length (a) and the delamination width (b), 2) Relationship between the delamination aspect ratio (b/a) and the delamination area rate ((A$\_$D/)/subN// (A$\_$D/)$\_$All/), 3) The effect of delamination aspect ratio (b/a) on the delamination shape factor (f$\_$s/) and the delamination growth rate (dA$\_$D// da). As results, it was known that the delamination aspect ratio (b/a) was decreased and the delamination area rate ((A$\_$D/)$\_$N// (A$\_$D/)$\_$All/) was increased as the normalized crack size (a/W) was increased. And, the delamination shape factors (f$\_$s/) of the ellipse-II(f$\_$s3/) was greater than of the ellipse-I(f$\_$s2/) but that of the triangle (f$\_$s1/) was less than of the ellipse-I(f$\_$s2/).

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.8
• /
• pp.3795-3802
• /
• 2012

Cochinchina momordica seeds (CMS) have been widely used due to antitumor activity by Mongolian tribes of China. However, the details of the underlying mechanisms remain unknown. In the present study, we found that an EtOAc (ethyl ester) extract of CMS (CMSEE) induced differentiation and caused growth inhibition of melanoma B16 F1 cells. CMSEE at the concentration of $5-200{\mu}g/ml$ exhibited strongest anti-proliferative effects on B16 F1 cells among other CMS fractions (water or petroleum ether). Moreover, CMSEE induced melanoma B16 F1 cell differentiation, characterized by dendrite-like outgrowth, increasing melanogenesis production, as well as enhancing tyrosinase activity. Western blot analysis showed that sustained phosphorylation of p38 MAP accompanied by decrease in ERK1/2 and JNK dephosphorylation were involved in CMSEE-induced B16 F1 cell differentiation. Notably, 6 compounds that were isolated and identified may be responsible for inducing differentiation of CMSEE. These results indicated that CMSEE contributes to the differentiation of B16 F1 cells through modulating MAPKs activity, which may throw some light on the development of potentially therapeutic strategies for melanoma treatment.