• Transactions of the Korean hydrogen and new energy society
• /
• v.34 no.5
• /
• pp.514-525
• /
• 2023

This study conducted numerical simulations with the purpose of analyzing the impact of variations in outlet pressure conditions under extreme temperature conditions on the fluid dynamics and performance of a check valve utilized in hydrogen refueling systems. Under the extreme temperature conditions, changes in outlet pressure conditions of the check valve were investigated to analyze velocity distributions, pressure distributions, and temperature distributions in the operational and connection regions. The analysis results indicated that changes in outlet pressure had a significant influence on the internal temperature variation of the check valve. Furthermore, due to density variations in the connection region caused by the cooling effect of excessively cooled hydrogen, a bias in the primary flow direction towards the lower part of the valve outlet was observed in the outlet area. Through a comparison of the results of the valve's inherent flow performance, represented by the flow coefficient, it was observed that when the pressure difference between the inlet and outlet was below 0.37 MPa, sufficient flow was not ensured.

• Journal of Korean Society for Quality Management
• /
• v.48 no.3
• /
• pp.463-479
• /
• 2020

Purpose: The purpose of this study is to evaluate the performance of heating equipments by implementing the extreme environment in which ships navigating the ice zone are exposed and to study and apply the experimental method to infer the optimized design for each factors. Methods: It is required to verify by analysis and experiment how the environment with low temperature and wind speed implemented through the test facility affects the heating walk-way and The optimum design of the heating walk-way in that extreme environment is derived using the Taguchi technique. Results: The results of this study are as follows; It was found the effect on the condition of each factor and derive optimized conditions that satisfy the performance condition of the heating walk-way in extreme use environment. Conclusion: Ships operating in Polar waters require reliable and durable facilities for all environments during sailing.

• Journal of Mechanical Science and Technology
• /
• v.17 no.1
• /
• pp.1-10
• /
• 2003

This paper summarizes the results of the fatigue test of four composite bridge decks in extreme temperatures (-30$^{\circ}C$ and 50$^{\circ}C$ ). The work was performed as part of a research program to evaluate and install multiple FRP bridge deck systems in Dayton, Ohio. A two-span continuous concrete deck was also built on three steel girders for the benchmark tests. Simulated wheel loads were applied simultaneously at two points by two servo-controlled hydraulic actuators specially designed and fabricated to perform under extreme temperatures. Each deck was initially subjected to one million wheel load cycles at low temperature and another one million cycles at high temperature. The results presented in this paper correspond to the fatigue response of each deck for four million load cycles at low temperature and another four million cycles at high temperature. Thus, the deck was subjected to a total of ten million cycles. Quasi-static load-deflection and load-strain responses were determined at predetermined fatigue cycle levels. Except for the progressive reduction in stiffness, no significant distress was observed in any of the composite deck prototypes during ten million load cycles. The effects of extreme temperatures and accumulated load cycles on the load-deflection and load-strain response of FRP composite and FRP-concrete hybrid bridge decks are discussed based on the experimental results.

• Korean Journal of Medicinal Crop Science
• /
• v.21 no.2
• /
• pp.105-111
• /
• 2013

This study was performed to investigate the enhancement of immunomodulatory activities of Lithospermum erythrorhizon by extreme process. The extracts are WE100 (water extract for 24 hours at $100^{\circ}C$), WE80 (water extract for 24 hours at $80^{\circ}C$), EE (70% ethyl alcohol extract for 24 hours at $80^{\circ}C$) and EPE (extreme process for 30 minutes at $25^{\circ}C$, 500 MPa after 70% ethyl alcohol extracts for 3 hours at 40, 50, $60^{\circ}C$). Extraction yield was increased up to 5~10% by extreme process, compare to the normal extraction such as water solvent extraction, 70% ethyl alcohol solvent extraction. The cytotoxicity of the extracts was showed in the range of 12.68~15.89% at $1.0mg/m{\ell}$ for human lung cell (HEL299). The EPE40 was showed the lowest cytotoxicity 12.68%. The EPE60 extracted by extreme process increased the growth of human B and T cells up to $12.12{\times}10^4\;cells/m{\ell}$ and $14.88{\times}10^4\;cells/m{\ell}$, respectively and the EPE60 greatly increased the cytokine secretion of both IL-6 and TNF-${\alpha}$. The extracts by extreme process also exhibited higher levels of nitric oxide production from macrophages than the lipopolysaccaharides. It can be concluded that Lithospermum erythrorhizon has immune activities and The extreme process could increase higher immune activities possibly by immunomodulatory compounds.

• Journal of the Korean Data and Information Science Society
• /
• v.27 no.5
• /
• pp.1155-1168
• /
• 2016

This paper considers a probability density estimation problem of climate values. In particular, we focus on estimating probability densities of summer extreme temperature over South Korea. It is known that the probability density of climate values at one location is similar to those at near by locations and one doesn't follow well known parametric distributions. To accommodate these properties, we use a mixture of conditional autoregressive species sampling model, which is a nonparametric Bayesian model with a spatial dependency. We apply the model to a dataset consisting of summer maximum temperature and minimum temperature over South Korea. The dataset is obtained from University of East Anglia.

• Geosystem Engineering
• /
• v.21 no.5
• /
• pp.282-290
• /
• 2018

The onset of extreme fire behaviour in a mine drift with longitudinal ventilation was analysed. A fire in a mine drift with continuous fuel load, involving several separate fires may lead to flames tilted horizontally and filling up the entire cross section. This will lead to earlier ignition, higher fire growth rate, higher fire spread rate and a severe fire behaviour. The focus has been on what changes take place at the onset and signs of the impending phenomenon. It was found that the fire gas temperature at the ceiling level provided a poor indicator. At the downstream far-field region of the fire, the sudden temperature increase at the lowest levels of the cross section and the sudden increase in flow velocities would provide signs of extreme fire behaviour. The corresponding full-scale heat release rates of the experiments at the onset of extreme fire behaviour were found to be very high for mining applications but not necessarily for tunnel fires. The heat release rate threshold for a mine drift with smaller cross-sectional dimensions would decrease considerably, increasing the likelihood of occurrence. The distance between the fuel items will play an important role during the initiation of horizontal flames.

• Journal of the Korean Geographical Society
• /
• v.49 no.1
• /
• pp.32-44
• /
• 2014

This study aimed to analyze the characteristic of the distribution of minimum temperature during January in the central region of South Korea and to investigate causes for the occurrence of extreme minimum temperature in Cheorwon. January temperature distribution data which were collected from 25 weather stations in central area from 1991 to 2010 were investigated, and the difference of temperature between Cheorwon and the other stations in central region, such as Chuncheon, Hongcheon, Bonghwa, Daegwallyoung, Wonju and Jecheon were analyzed by the type of atmospheric pressure system. Daily mean temperature and mean of daily minimum temperature appear to be low at Cheorwon and at the sites in high altitudes, but the frequency of extreme cold wave such as below $-15^{\circ}C$ is also noticeable in Cheorwon. When the Siberian High has expanded and migratory anticyclone has moved onto the north of the Korean Peninsula, the temperature at Cheorwon is relatively low. Furthermore it shows a lesser difference between Cheorwon and the compared stations when the migratory anticyclone affected the area, even at basin like Bonghwa, Jecheon more lower than Cheorwon.

• Journal of the Korean association of regional geographers
• /
• v.21 no.2
• /
• pp.394-410
• /
• 2015

This study aims to classify climate zones for extreme climate indices over the Republic of Korea. First, frequencies and magitudes of extreme high temperature, spatial distributions for extreme low temperature, and extreme precipitation are analysed. Frequencies of summer days in inland region show more than coastal region. In frequencies of frost days, the characteristics of altitude and longitude are appeared. Heavy precipitation days show many frequencies in the southern coastal region and Jeju island, but little in Gyeongsangbuk-do region. The classification of climate zone for extreme climate indices by principal component analysis and cluster analysis is conducted for the first half, second half of study period, and climatology period for 1981-2010. Summer days are classified according to latitude. In case of frost days, the eastern and the southern coastal region and Jeju island are classified as same region. Heavy precipitation days are classified according to longitude in south region of Gyeonggi-do and Gangwon-do. This study will help to prepare adaptation and mitigation system for climate change in wide range of fields.

• Proceedings of The Korean Society of Agricultural and Forest Meteorology Conference
• /
• 2016.09a
• /
• pp.44-48
• /
• 2016

Extreme temperature impacts on field crop are of key concern and increasingly assessed, however the studies have seldom taken into account the automatic adaptations such as shifts in planting dates, phenological dynamics and cultivars. In this present study, trial data on rice phenology, agro-meteorological hazards and yields during 1981-2009 at 120 national agro-meteorological experiment stations were used. The detailed data provide us a unique opportunity to quantify extreme temperature impacts on rice yield more precisely and in a setting with automatic adaptations.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.27 no.2
• /
• pp.87-93
• /
• 2015

Recently, the heat exchangers are requiring higher performance and reliability since they are being used under the operating condition of high temperature and pressure. To satisfy these requirements, we need special materials and bonding technology. This study presents a manufacturing technology for high temperature and high pressure micro channel heat exchanger using Inconel 617. The bonding performance for diffusion bonded heat exchanger was examined and analyzed. The analysis were conducted by measuring thermal and mechanical properties such as thermal diffusivity and tensile strength, and parametric studies about bonding temperature and pressing force were also carried out. The results provided insight for bonding evaluation and the bonding condition of $1200^{\circ}C$, and 50 tons was found to be suitable for this heat exchanger. From the results, we were able to establish the base technology for the manufacturing of Inconel 617 heat exchanger through the application of the diffusion bonding.