• Wind and Structures
• /
• v.19 no.4
• /
• pp.421-441
• /
• 2014

With the assistance of typhoon field data at aerial elevation level observed by meteorological satellites and wind velocity and direction records nearby the ground gathered in Guangzhou Weather Station between 1985 and 2001, some key wind field parameters under typhoon climate in Guangzhou region were calibrated based on Monte-Carlo stochastic algorithm and Meng's typhoon numerical model. By using Peak Over Threshold method (POT) and Generalized Pareto Distribution (GPD), Wind field characteristics during typhoons for various return periods in several typical engineering fields were predicted, showing that some distribution rules in relation to gradient height of atmosphere boundary layer, power-law component of wind profile, gust factor and extreme wind velocity at 1-3s time interval are obviously different from corresponding items in Chinese wind load Codes. In order to evaluate the influence of typhoon field parameters on long-span flexible bridges, 1:100 reduced-scale wind field of type B terrain was reillustrated under typhoon and normal conditions utilizing passive turbulence generators in TJ-3 wind tunnel, and wind-induced performance tests of aero-elastic model of long-span Guangzhou Xinguang arch bridge were carried out as well. Furthermore, aerodynamic admittance function about lattice cross section in mid-span arch lib under the condition of higher turbulence intensity of typhoon field was identified via using high-frequency force-measured balance. Based on identified aerodynamic admittance expressions, Wind-induced stochastic vibration of Xinguang arch bridge under typhoon and normal climates was calculated and compared, considering structural geometrical non-linearity, stochastic wind attack angle effects, etc. Thus, the aerodynamic response characteristics under typhoon and normal conditions can be illustrated and checked, which are of satisfactory response results for different oncoming wind velocities with resemblance to those wind tunnel testing data under the two types of climate modes.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.2B
• /
• pp.131-139
• /
• 2009

Recently frequent occurrences of heavy rainfall and increases of rainfall intensity resulted in severe flood damage in Korea. In order to mitigate the vulnerability of flood, it is necessary to estimate proper design rainfalls considering the increasing trend of extreme rainfalls for hydrologic planning and design. This study focused the estimation of design rainfalls in a design target year. Tests of trend indicated that there are 7 sites showing increasing trends among 56 sites which have hourly data more than 30 years in Korea. This study analyzed the relationship between mean of annual maximum rainfalls and parameters of the Gumbel distribution. Based on the relationship, this study estimated the probability density function and design rainfalls in a design target year, and then constructed the rainfall-frequency curve. The proposed method estimated the design rainfalls 6-20% higher than those from the stationary rainfall frequency analysis.

• Journal of the Korea Concrete Institute
• /
• v.26 no.2
• /
• pp.159-169
• /
• 2014

This study generalizes the lateral load-displacement relationship of reinforced concrete shear walls from the section analysis for moment-curvature response to straightforwardly evaluate the flexural capacity and ductility of such members. Moment and curvature at different selected points including the first flexural crack, yielding of tensile reinforcing bar, maximum strength, 80% of the maximum strength at descending branch, and fracture of tensile reinforcing bar are calculated based on the strain compatibility and equilibrium of internal forces. The strain at extreme compressive fiber to determine the curvature at the descending branch is formulated as a function of reduction factor of maximum stress of concrete and volumetric index of lateral reinforcement using the stress-strain model of confined concrete proposed by Razvi and Saatcioglu. The moment prediction models are simply formulated as a function of tensile reinforcement index, vertical reinforcement index, and axial load index from an extensive parametric study. Lateral displacement is calculated by using the moment area method of idealized curvature distribution along the wall height. The generalized lateral load-displacement relationship is in good agreement with test result, even at the descending branch after ultimate strength of shear walls.

• The Bulletin of The Korean Astronomical Society
• /
• v.35 no.1
• /
• pp.28.2-28.2
• /
• 2010

We have investigated seven Extreme-Ultraviolet (EUV) bright points in the active region (AR 10926) on 2006 December 2 by the EUV imaging spectrometer (EIS) onboard Hinode spacecraft. We determined their Doppler velocities and non-thermal velocities from 15 EUV spectral lines (log T=4.7-7.2) by fitting each line profile to a Gaussian function. We present the Doppler velocity map as a function of temperature which corresponds to a different height. As a result, these active region bright points show two different types of characteristics. Type 1 bright point shows a systematic increase of Doppler velocity from -68 km/s (blue shift) at log T=4.7 to 27 km/s (red shift) at log T=6.7, while type 2 bright points have Doppler velocities in the range of -20 km/s and 20 km/s. Using MDI magnetograms, we found that only type 1 bright point was associated with the canceling magnetic feature at the rate of $2.4{\times}10^{18}$ Mx/hour. When assuming that these bright points are caused by magnetic reconnection and the Doppler shift indicates reconnection out flow, the pattern of the Doppler shift implies that type 1 bright point should be related to low atmosphere magnetic reconnection. We also determined electron densities from line ratio as well as temperatures from emission measure loci using CHIANTI atomic database. The electron densities of all bright points are comparable to typical values of active regions (log Ne=9.9-10.4). For the temperature analysis, the emission loci plots indicate that these bright points should not be isothermal though background is isothermal. The DEM analysis also show that while the background has a single peak distribution (isothermal), the EUV bright points, double peak distributions.

• Journal of Korea Water Resources Association
• /
• v.49 no.3
• /
• pp.217-225
• /
• 2016

The drought is generally characterized by duration and severity, thus it is required to conduct the bivariate frequency analysis simultaneously considering the drought duration and severity. However, since a bivariate joint probability distribution function (JPDF) has a 3-dimensional space, it is difficult to interpret the results in practice. In order to suggest the technical solution, this study employed copula functions to estimate an JPDF, then developed conditional JPDFs on various drought durations and estimated the critical severity corresponding to non-exceedance probability. Based on the historical severe drought events, the hydrologic risks were investigated for various extreme droughts with 95% non-exceedance probability. For the drought events with 10-month duration, the most hazardous areas were decided to Gwangju, Inje, and Uljin, which have 1.3-2.0 times higher drought occurrence probabilities compared with the national average. In addition, it was observed that southern regions were much higher drought prone areas than northern and central areas.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.9 no.6
• /
• pp.143-151
• /
• 2009

Extreme hydrologic events cause serious disaster, such as flood and drought. Many researchers have an effort to estimate design rainfalls or discharges. This study evaluated parameter estimation methods to estimate probability rainfalls with low uncertainty which will be used in design rainfalls. This study collected rainfall data from Incheon, Gangnueng, Gwangju, Busan, and Chupungryong gage station, and generated synthetic rainfall data using ARMA model. This study employed the maximum likelihood method and the Bayesian inference method for estimating parameters of the Gumbel and GEV distribution. Using a bootstrap resampling method, this study estimated the confidence intervals of estimated probability rainfalls. Based on the comparison of the confidence intervals, this study recommended a proper parameter estimation method for estimating probability rainfalls which have a low uncertainty.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.13 no.2
• /
• pp.112-139
• /
• 2000

I examined and referred to literatures of every generations on the nicknames, causes, herb medications and acupucture treatments of ptosis(上胞下垂). And then the results were obtained as follows. We've compared and analyzed Occidental and Oriental medical causes, symptoms and treatments of Primary trigeminal neuralgia and wanted to get better effects by a cooperative analysis. So the examination and analysis of the recent treatment tendency and reference bibliography show the following results. 1. Trigeminal neuralgia is nerve systematic disease appearing in the distribution scope of trigeminal nerve. It's characterized by extreme pain accompanying with a repeated and simultaneous fit from several seconds to 1-2 minutes. 2. Though there are many hypothesis on the trigeminal neuralgia, but now many doctors agree that when trigeminal nerve is under the local out of sheath conditions resulting from receiving a chronic stimulus, and the nucleus of trigeminal nerve fire, owing to decrease of pain control function and abnormal occurrence of action potential, it would be appeared. 3. The Oriental medical name of trigeminal neuralgia is generally Dootong, Doopoong, Myuntong, Pyundootong, Pyundoopoong, and Myuntong is the nearest in Occidental medicine. 4. The Oriental medical cause of trigeminal neuralgia is usually divided into Wekam and Naesang. The first one is caused by Poonghan, Poongyul, Damhwa and wicked energy enter into the body, the mechanical energy is obstructed and can't move any more, so the pain appears by them. The other cause is the hurt by emotion. And it would be loss of the transportain of liver and obstructed, so result into Kanwulhwahwa, Kanpoongnaedong and the pain appears. 5. There are two methods of curing trigeminal neuralgia. As a medication, primary method is prescribing Carbamazepine and the second is using Phenytoin or Baclofen. And as a operation, Drug injection of trigeminal nerve, Amputation of branches of trigeminal nerve, Retrogasserian glycerol rhizotomy, Radiofrequency gangliolysis, Neurovascular decompression can be used. 6. There are several herb medicines for Trigeminal neuralgia. First, Chungung is good for Hwaejeetong, Keopoongjedam, Hwalhyuljeetong. Second, Jeongal, Jiryong, Okong is used for Sikpoonghekyung, Tongkyungjeetong. Third, Baekjee, Sesin, Cheonma, Manhyungja is efficacious in Sinonhepyo. Sanpoongjeetong. Fourth, for falling of liver's Wulhwa, Yongdamcho, Hyungge, Kukwha can be used. And also Saengjihwang, Hwangkm is good for going down the fever of Yangmyungwiyul and finally, Baekkangjam. Moryu can be effective for Jaumjamyang, Haekyungjitong. The other medicines can be used as assistant analgesics, and it also efficacious. 7. Generally the points of pain on the face and the points of Soyangkyung and Yangmyungkyung is used for Acupuntual therapy, because the two meridians passed on the face. Hakwan. Sabaek, Kwanryo, Keoryo, Hyubkeo, Taeyang, Jeechang, Younghyang, Eoyo, Chanjuk. Yangbaek. Sajukkong. Dooyoo, Kwangsangjum, Sengjang, Poongjee is used for taking near point and Joksamlee, Naejung, Habkok is used for taking distant point. 8. Dansam or Danggui injection which have a effect for Hwalhyulhwaeo, Sokyunghwalak and Vit B1, Vit B2, Vit B12, $2\%$ Hydrochloroprocaine, $1\%$ Lidocaine injection to pain point for local analgesics had so good effect. And external application and moxibustion are used for another treatment. 9. It proved that through mouse model, both Herb medication group and Drug medication group are efficacious for trigeminal neuralgia similarly and also the cooperative medication group shows more effective result than the only drug medication group.

• Computational Structural Engineering
• /
• v.10 no.3
• /
• pp.175-184
• /
• 1997

The objective of this paper is to study arelationship between maximum response and its standard deviation of rotational shells that are subjected to uneven settlements. For this, the ratio, .eta, of the maximum response to standard deviation and it's approximate, .eta./sub apr/, are investigated by stochastic methods. Also, an equation for .eta./sub apr/, that is a function of predominant harmonic number is suggested. The settlements are represented by the Fourier series. Each term in the series contains two coefficients; the amplitude and the phase angle. It is assumed that phase angles are random variables and amplitudes are deterministic. To investigate the characteristics of .eta. and .eta./sub apr/, 100 phase angles for two types of artificial amplitudes spectra are used in the analysis. .eta. and .eta./sub apr/, are almost constant regardless of amplitude type, position of a shell or type of responses; they fall into from 2.0 to 2.5. .eta./sub apr/ is always close to .eta., but tends to be somewhat greater. It may be concluded that a maximum responses of rotational shells subjected to uneven settlements are .eta./sub apr/ (about 2.5) times of its standard deviation. It is considered that this result is used when we design rotational shell structures subjected to differential settlements.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.1
• /
• pp.29-41
• /
• 2017

Design rainfalls are one of the most important hydrologic data for river management, hydraulic structure design and risk analysis. The design rainfalls are first estimated by a point frequency analysis and the IDF (intensity-duration-frequency) curve is then constructed by a nonlinear regression to either interpolate or extrapolate the design rainfalls for other durations which are not used in the frequency analysis. It has been widely recognised that the more reliable approaches are required to better account for uncertainties associated with the model parameters under circumstances where limited hydrologic data are available for the watershed of interest. For these reasons, this study developed a hierarchical Bayesian based GLM (generalized linear model) for a regional frequency analysis in conjunction with a scaling function of the parameters in probability distribution. The proposed model provided a reliable estimation of a set of parameters for each individual station, as well as offered a regional estimate of the parameters, which allow us to have a regional IDF curve. Overall, we expected the proposed model can be used for different aspects of water resources planning at various stages and in addition for the ungaged basin.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.51 no.2
• /
• pp.28-41
• /
• 2023

The objective of the study was to develop an Urban Windway Forest Creation Planning Technique for the Improvement of the Urban Environment using the case of Daejeon Metropolitan City. Through a spatial analysis of fine dust and heat waves, a basin zone, in which the concentration was relatively serious, was derived, and an area with the potential of cold air flow was selected as the target area for the windway forest development by analyzing the climate and winds in the relevant zone. Extreme fine dust areas included the areas of the Daejeon Industrial Complex Regeneration Business District in Daedeok-gu and Daedeok Techno Valley in Yuseong-gu. Heat wave areas included the areas of Daedeok industrial Complex in Moksang-dong, the Daejeon Industrial Complex Regeneration Business District in Daehwa-dong, and the high-density residential area in Ojeong-dong. As a result of measuring the wind speeds in Daejeon with an Automatic Weather System, the average wind speeds during the day and night were 0.1 to 1.7 m/s,, respectively. So, a plan of for a windway forest that smoothly induces the movement of cold air formed in outer forests at night is required. The fine dust/heat wave intensive management zones of Daejeon Metropolitan City were Daejeoncheon, Yudeungcheon, Gapcheon-Yudeungcheon, and Gapcheon. The windway forest formation plan case involved the old city center of Daejeon Metropolitan City among the four zones, the Gapcheon-Yudeungcheon area, in which the windway formation effect was presumed to be high. The Gapcheon-Yudeungcheon area is a downtown area that benefits from the cold and fresh air generated on Mt. Gyejok and Mt. Wuseong, which are outer forests. Accordingly, the windway forest was planned to spread the cold air to the city center by connecting the cold air generated in the Seosa-myeon forest of Mt. Gyejok and the Namsa-myeon forest of Mt. Wuseong through Gapcheon, Yudeungcheon, and street forests. After selecting the target area for the wind ventilation forest, a climate map and wind formation function evaluation map were prepared for the area, the status of variation wind profiles (night), the status of fine dust generation, and the surface temperature distribution status were grasped in detail. The wind ventilation forest planning concept and detailed target sites by type were identified through this. In addition, a detailed action plan was established according to the direction of creation and setting of the direction of creation for each type of wind ventilation forest.