• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.9
• /
• pp.78-85
• /
• 2008

Piezoelectric materials have been investigated as vibration energy converters to power wireless devices or MEMS devices due to the recent low power requirements of such devices and the advancement in miniaturization technology. Piezoelectric power generation can be an alternative to the traditional power source-battery because of the presence of facile vibration sources in our environment and the potential elimination of the maintenance required for large volume batteries. This paper represents the new power source which supplies energy device node. This system, called "energy harvesting system", with piezo materials scavenges extra energy such as vibration and acceleration from the environment. Then it converts the mechanical energy scavenged to electrical energy for powering device This paper explains the properties of piezo material through theoretical analysis and experiments The developed system provides a solution to overcome the critical problem of making up wireless device networks.

• Journal of Chest Surgery
• /
• v.20 no.2
• /
• pp.384-392
• /
• 1987

The occlusive coronary artery disease presents a potential threat to a significant population in the United State. According to many case reports, the increasing incidence of coronary artery disease due to atherosclerosis is noted in Korean, recently. We experienced one case of coronary artery disease. He was a 68 year old male who had been suffered from hypertension since 1 5 years ago, and had intermittent conservative treatment at local clinic. He had been afflicted with severe chest pain on exertion, but this symptom was relieved on rest. Pre-operative EKG finding revealed no any other ischemic sign. Significant S-T segment depression was noted at lead II, aVF, V3, V4, and V5, and inverted T wave in V5 and V6 after Master`s test. Simple chest X-ray finding showed emphysematous field, bilaterally. Final pre-operative diagnosis was made by coronary angiogram, which showed almost 90% degree of occlusive lesion in the proximal part of left main coronary artery above the origin LAD artery. He was treated successfully by aorta-coronary saphenous vein graft under extra-corporeal circulation in May, 1987. He has been followed up with uneventful course.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.30B no.8
• /
• pp.64-70
• /
• 1993

This paper presents an efficient SOFM(self-organizing feature map) algorithm for the solution of the large scale TSPs(traveling salesman problems). Because no additional winner neuron for each city is created in the next competition, the proposed algorithm requires just only the N output neurons and 2N connections, which are fixed during the whole process, for N-city TSP, and it does not requires any extra algorithm of creation of deletion of the neurons. And due to direct exploitation of the output potential in adaptively controlling the neighborhood, the proposed algorithm can obtain higher convergence rate to the suboptimal solutions. Simulation results show about 30% faster convergence and better solution than the conventional algorithm for solving the 30-city TSP and even for the large scale of 1000-city TSPs.

• Archives of design research
• /
• v.14 no.2
• /
• pp.279-292
• /
• 2001

The network drafting is introduced by american weaver Alice schlein, that is not a new weave, but a way of exploring old structures and driving them a new design. It was evident that larger scale pattern design produced on computer dobby-that is a loom without a jacquard mechanism, draw harness, or other extra patterning devices. Therefore, this study explored that developing and new weave design through the processing of network drafting In give a guide based on it In this process, the results of this study were as follow. A network is a collection of legal threading position that is constructed from a building block, called an "initial" which is the smallest identifiable unit of the threading. The process of network drafting produces large-scale designs without the chunky look of block weaves in addition In infinite potential variation on a singles threading through changes in tie-ups and dobby peg plan. It can get various new drafting through using of isolated, connected, disconnected pattern line.

• International Journal of Quality Innovation
• /
• v.2 no.2
• /
• pp.69-92
• /
• 2001

The laser-assisted seeding (LAS) process has potential to replace conventional electroless copper plating in Printed Circuit Board (PCB) manufacturing since it combines the steps of laser drilling and plating into one single process. In the LAS process, the single extra LAS step can metallize a microvia. Thus, the process steps can be greatly reduced and the productivity enhanced, but also the high aspect ratio microvias can be metallized. The objectives of this paper are to study the LAS copper thickness within PCB microvias and the thermal reliability of the microvias produced by this process. It was found that results were satisfactory in both the reliability test and also the LAS copper thickness which both comply with IPC standard, the copper thickness produced by the LAS process is sufficient for subsequent electro-plating process. The reliability of the microvias produced by LAS process is acceptable which are free from any voids, corner cracks, and distortion in the plated copper.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.2
• /
• pp.176-184
• /
• 2001

The VDC(Vehicle Dynamics Control) is a control system whose target is to improve vehicle stability under critical motion. The system has a good potential of becoming a standard active safety unit in passenger vehicles since it can be implemented on top of the ABS/TCS system with little extra cost. This, however, is possible only when the signals that the VDC system demands can be obtained with sufficient accuracy. In this research, estimators for the road friction coefficient and body sideslip angle have been designed. The two variables have great influence upon performance of the VDC system but not directly measurable. For the estimator design, the Newton method and the nonlinear observer theory have been exploited. The performance of the estimator have been verified via simulations on critical driving conditions.

• IE interfaces
• /
• v.18 no.2
• /
• pp.117-125
• /
• 2005

One of the primary means of achieving global competitiveness is to reduce the COPQ in our business units. Although the COPQ is not known precisely, it is known to be very high. Also, it may be underestimated by the hidden costs due to non-value added activities, such as potential lost sales, costs of redesign due to quality reasons, and extra manufacturing costs due to defects, etc. In any manufacturing or service operation, all actions and resource expenditures of a company should be focused on creating value for customers. Any activity or resource of not creating the value for customers could be regarded as waste, which consequently causes the COPQ. In this paper, a management system is developed for evaluating and reporting the COPQ in our business units, based on the Six Sigma DMAIC (Define, Measure, Analyze, Improve, Control) roadmap.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.376-379
• /
• 2003

DNA computing based DNA sequence Is operated through the biology experiment. Biology experiment used as operator causes illegal reactions through shifted hybridization, mismatched hybridization, undesired hybridization of the DNA sequence. So, it is essential to design DNA sequence to minimize the potential errors. This paper proposes method of the DNA sequence generation based evolutionary operation processor. Genetic algorithm was used for evolutionary operation and extra hardware, namely genetic algorithm processor was implemented for solving repeated evolutionary process that causes much computation time. To show efficiency of the Proposed processor, excellent result is confirmed by comparing between fitness of the DNA sequence formed randomly and DNA sequence formed by genetic algorithm processor. Proposed genetic algorithm processor can reduce the time and expense for preparing DNA sequence that is essential in DNA computing. Also it can apply design of the oligomer for development of the DNA chip or oligo chip.

• Journal of Magnetics
• /
• v.18 no.3
• /
• pp.331-338
• /
• 2013

We present a few significant advances in methods and concepts of magnetic measurements, aimed both at providing novel routes in the characterization of hard and soft magnetic materials and at improving our basic knowledge of the magnetization process. We discuss, in particular, investigation methods and experimental arrangements that have been developed in recent times for: 1) Hysteresis loop determination in extra-hard magnets by means of Pulsed Field Magnetometry; 2) Broadband observation of domain wall dynamics by highspeed stroboscopical Kerr techniques; 3) Entropy measurements in magnetocaloric materials by calorimetry in magnetic field. While pertaining to somewhat independent fields of investigation, all these measuring techniques have in common a solid approach to the underlying physical phenomenology and have a potential for further developments.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.2
• /
• pp.174-186
• /
• 2019

This paper reviews the development condition of nanomaterials used in concrete over years. The definitions of nanomaterial, nanotechnology, and nano-concrete are reviewed. The impacts of nanomaterials on cementitious material in the point of advantages and disadvantages are analyzed. Moreover, this paper analyzes and classifies the nanomaterials into the extra quality enhancement and modification to plain cementitious composite. Indeed, the outstanding properties of the embedded nanomaterials can be introduced to concrete such as the mechanical improvement, pore structure refinement, hydrate acceleration, and smartness modifying of self-cleaning, and/or self-sensing. Before the full potential of nanotechnology can be realized in concrete applications, various techniques have to be solved including proper dispersion, compatibility of the nanomaterials in cement, processing, manufacturing, safety, handling issues, scale-up, cost, the impact on the environment and human health.