• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.04a
• /
• pp.789-794
• /
• 2008

The damage identification in a flexible system requires modal informations which is represented by FRF(Frequency response function) or modal parameters. In this paper, energy isoclines are introduced to access the prediction of fatigue damage on a flexible component exposed mainly to the exciting source rather than external forces. After deriving the concerned function, energy isoclines, from the investigation of the relationship between energy and damage, its practical application is explained by the simple uni-axial excitation test for the notched round bar.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.04a
• /
• pp.795-800
• /
• 2008

The sound transmission loss is a key index to evaluate the acoustic performance of a car-body structure at the high frequency range. From this paper, a new validation method for in-situ sound transmission loss is proposed. First, in-situ sound transmission loss is measured by using PU intensity probe on the condition of complete vehicle. Second, validation test, which is consisted of internal, external and total frequency response function test, is performed by using volume acceleration source and microphones. Then, these test results are compared to validate the accuracy of in-situ sound transmission loss. Finally, the test result of in-site method is compared with results of two reverberant room test method and SEA analytical method. The reliability of in-situ method is confirmed by these procedures.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2006.04a
• /
• pp.264-271
• /
• 2006

Stay cables, such as used in cable-stayed bridges, are prone to vibration due to their low inherent damping characteristics. It has been reported that a semiactive control system using MR dampers could potentially achieve both the better performance compared to a passive control system and the adaptability with few of the detractions. However, a control system including a power supply, a controller and sensors is required to improve the control performance of MR dampers. This complicated control system is not effective to most of large civil structures such as long-span bridges and high-rise buildings. This paper proposes a smart damping system which consists of an MR damper and the electromagnetic induction (EMI) part that is considered as an external power source to the MR damper. The control performance of the proposed damping system has been compared with that of the passive-type control systems employing an MR damper and a linear viscous damper.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2005.03a
• /
• pp.505-512
• /
• 2005

MR damper is one of the most promising control devices for civil engineering applications to earthquake hazard mitigation. However, a control system including a power supply, controller, and sensors is required to maximize the performance of the MR damper and this complicated control system is not effective to most of large civil structures. This paper proposes and experimentally verified a smart passive damping system using MR(Magnetorheological) dampers by introducing electromagnetic induction(EMI) system as an external power source to MR damper. It is easy to build up and maintain EMI system, because it does not require any control system such as a power supply, controller, and sensors. Numerical simulations using experimental model of EMI system are carried to verify the effectiveness of the proposed EMI system. The performances of smart passive damping system are compared with those of passive and semiactive MR dampers.

• Journal of Oriental Neuropsychiatry
• /
• v.13 no.2
• /
• pp.1-10
• /
• 2002

Dreams are experiences of life that is recognized to have taken place in .the mind while asleep. The phenomenon of dreams is occured by external stimuli such as somatic factor and emotion-arousing pre-sleep stimuli. The contents of dreams reflect the dreamer's unique psychic situation, we can view them from category of Yin and Yang and the Five Elements(陰陽五行). Also dreams are characterized by an objectivity that provides whatever in necessary for psychic balance, regardless of the ego's wishes. Hence dreams are objective sources of psychotherapy. The doctor must not treat patient by the doctor's subject mind. The Orient has taken the idea that human beings have the divine center in the heart, so dreams in the psychotherapy of the oriental medicine are more valuable as representation of inner world. The images of dream are classified as the deficiency and excessiveness of Yin-Ki and Yang-Ki of the internal organs, an property and source of stimulus. Dream applies to diagnose the disease of internal organs and to decide to the method of medical treatment.

• Proceedings of the KIEE Conference
• /
• 1996.07c
• /
• pp.1822-1824
• /
• 1996

Damage and upset of control and communication equipment due to transient overvoltages which occur due primarily to internal switching surge and external lightning surge are an important problems in electromagnetic compatibility(EMC). In this paper, we analyzed operation characteristic of metal oxide varistor widely used low voltage AC line using the electromagnetic transients program(EMTP) and compare it with experimental results and also, we modeled combination generator producing $1.2/50{\mu}s$ open circuit voltage and $8/20{\mu}s$ short circuit current as a source which is critical in calculating operation characteristic. Simulation results showed that most of Transient energy consumes at MOV located in service entrance side than load side, and it showed similar to experimental results. Therefore, entrance side MOV should be selected more energy capacity than that of load side MOV.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 1999.11a
• /
• pp.145-148
• /
• 1999

In this paper, multi gap type ozonizer(MGO) has been designed and manufactured. The ozonizer is equipped with three electrodes(central electrode of screw shape, internal electrode and external electrode) of cylinder shape. This paper describes the following two characteristics: $\circled1$ The characteristics of discharge with variation of output voltage of AC H.V source, flux of oxygen supplied gas and discharge voltage. $\circled2$ The characteristics of ozone generation by varying flux and discharge power.

• Genomics & Informatics
• /
• v.6 no.1
• /
• pp.50-53
• /
• 2008

We have released five Java Application Programming Interface (API) packages for viewing three-dimensional structures of proteins from the Protein Data Bank. To this end, the user interface of an earlier version has been refactored in an object-oriented fashion, in which refactoring is the process of changing a software system to improve its internal structure, without altering the external behavior. Various GUI design and features have been provided conveniently thanks to the Model-View-Control (MVC) model, which is an architectural pattern used in software engineering. Availability: The source code and API specification can be downloaded from https://sourceforge.net/projects/j3dpsv/.

• Knowledge Management Research
• /
• v.17 no.1
• /
• pp.135-154
• /
• 2016

Absorptive capacity has been increasingly thought of as a potential source of innovation. From the knowledge management perspective, absorptive capacity is composed of a set of activities dealing with acquisition, assimilation, transformation, and exploitation of external and internal knowledge. This study investigates what relationship the absorptive capacity of individuals who have technical knowledge in the organization has with process innovation and product innovation. Mobile based survey was conducted from the employees working for the largest electronics manufacturer in Korea. The analyzed data was based on 156 responses from 199 participants. The analysis result shows that four phases of absorptive capacity such as acquisition, assimilation, transformation and exploitation have different effects on process innovation and product innovation, respectively. Specifically, transformation is found to be most critical in leading to innovation.

• International Journal of Oral Biology
• /
• v.34 no.2
• /
• pp.49-52
• /
• 2009

Perception of sweet compounds is important for animals to detect external carbohydrate source of calories and plays a crucial role in feeding behavior of animals. Recent progress in molecular genetic studies provides evidence for a candidate receptor (heterodimers with taste receptor type 1 member 2 and 3: T1R2/T1R3), and major downstream transduction molecules required for sweet taste signaling. Several studies demonstrated that the sweet taste signal can be modulated by a satiety hormone, leptin, through its receptors expressed in a subset of sweet-sensitive taste cells. Increase of internal energy storage in the adipose tissue leads to increase in the plasma leptin level which can reduce activities of sweet-sensitive cells. In human, thus, diurnal variation of plasma leptin level parallels variation of taste recognition thresholds for sweet compounds. This leptin modulation of sweet taste sensitivity may influence individuals' preference, ingestive behavior, and absorption of nutrients, thereby plays important roles in regulation of energy homeostasis.