• 로봇학회논문지
• /
• 제13권1호
• /
• pp.55-62
• /
• 2018

In this paper, a method for estimation of external force on an end-effector using joint torque sensor is proposed. The method is based on portion of measure torque caused by external force. Due to noise in the torque measurement data from the torque sensor, a recursive least-square estimation algorithm is used to ensure a smoother estimation of the external force data. However it is inevitable to create a delay for the sensor to detect the external force. In order to reduce the delay, modified recursive least-square is proposed. The performance of the proposed estimation method is evaluated in an experiment on a developed six-degree-of-freedom robot. By using NI DAQ device and Labview, the robot control, data acquisition and The experimental results output are processed in real time. By using proposed modified RLS, the delay to estimate the external force with the RLS is reduced by 54.9%. As an experimental result, the difference of the actual external force and the estimated external force is 4.11% with an included angle of $5.04^{\circ}$ while in dynamic state. This result shows that this method allows joint torque sensors to be used instead of commonly used external sensory system such as F/T sensors.

• 대한임베디드공학회논문지
• /
• 제14권5호
• /
• pp.259-267
• /
• 2019

This paper proposes a structure of a variable impedance control system based on sensor-less external force estimator of industrial manipulators for cyber physical production systems (CPPS). To implement CPPS, a feedback system is constructed by using the robot operating system (ROS) and an external force estimator which is designed to measure the external force applied to the manipulator without a force sensor. Based on the robot dynamics, the robot-human cooperating system for the cyber physics production system is implemented through a controller that changes the impedance characteristics of the manipulator according to the situation using the external force estimator. Simulation and experimental results verify the effectiveness of the proposed control system.

• 대한수학회논문집
• /
• 제17권1호
• /
• pp.175-187
• /
• 2002

The existence and uniqueness of steady states for the age structured S-I-R epidemic model is considered. Intercohort form with external force is considered for the force of infection. Existence is obtained for nonvanishing external force of infection. Uniqueness is shown for the case where there is no vertical transmission of the disease.

• 한국지능시스템학회논문지
• /
• 제23권5호
• /
• pp.379-384
• /
• 2013

해상교통관제센터(Vessel Traffic Service, VTS)에서 항해중인 선박의 효과적인 관리를 위해 선박에 영향을 주는 외력에 대한 평가가 필요하다. 해상교통 빅데이터는 크게 선박 제원 및 통항정보 등 선박에 의하여 수집되는 정보가 있으며, 다른 하나는 해역에 관련된 바람, 파고, 조류흐름의 외력정보가 있다. 본 연구에서는 이러한 해상교통 빅데이터를 활용하여 선박에 영향을 주는 외력영향을 평가하는 방법에 대해 제안한다. 해상교통 빅데이터를 활용하기 위하여 바람, 파도, 조류 정보, 대수속력(Speed Over Water, SOW)에 대한 정보로 구성되는 해역외력코드(Waterway External Force Code)를 사용하였다. 해역외력코드를 데이터베이스로 하여 그 결과로서 선박에 작용하는 외력영향을 추정하였다.

• 대한수학회논문집
• /
• 제18권1호
• /
• pp.133-149
• /
• 2003

Local stability of steady states of an epidemic model is considered. An age structured S-I-R epidemic model with separable inter-cohort force of infection with external force is considered. Stability result for the nontrivial steady states is obtained.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.803-806
• /
• 1997

In this paper, a force estimation method is proposed for the sensorless force control. For this, a disturbance observer is applied to each joint of an n degrees of freedom manipulator to obtain a simple equivalent robot dynamics(SERD) being represented as an n independent double integrator system. To estimate the output of disturbance observer in the absence of external force, the observer estimator is designed, where the uncertain parameters of the robot manipulator are adjusted by gradient method to minimize the output between the disturbance observer and the observer estimator. When the external force is exerted, the external force is estimated using the difference between the output of disturbance observer which include the external torque signal and that of observer estimator. And then, a force controller is designed for force feedback control employing the estimated force signal. To verify the effectiveness of the proposed force estimation method, several numerical examples are illustrated for the 2-axis planar type robot manipulator.

• 로봇학회논문지
• /
• 제8권2호
• /
• pp.67-74
• /
• 2013

This paper presents interaction force control between a balancing robot and a human operator. The balancing robot has two wheels to generate movements on the plane. Since the balancing robot is based on position control, the robot tries to maintain a desired angle to be zero when an external force is applied. This leads to the instability of the system. Thus a hybrid force control method is employed to react the external force from the operator to guide the balancing robot to the desired position by a human operator. Therefore, when an operator applies a force to the robot, desired balancing angles should be modified to maintain stable balance. To maintain stable balance under an external force, suitable desired balancing angles are determined along with force magnitudes applied by the operator through experimental studies. Experimental studies confirm the functionality of the proposed method.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제16권4호
• /
• pp.262-269
• /
• 2016

In this paper, we propose a novel dynamical love model of Romeo and Juliet, which has an external force with a fuzzy membership function. The external force used in the model has the characteristics of a Gaussian function. The chaotic behavior in the model is demonstrated using time series and phase portraits.

• 한국구조물진단유지관리공학회 논문집
• /
• 제13권2호통권54호
• /
• pp.153-164
• /
• 2009

본 논문에서는 2경간 강합성교량의 내하력을 향상시키기 위해, 외부 긴장재로 보강하는 방법을 제시하였다. 긴장재를 직선 배치하였을 경우, 외부하중으로 인한 증가 프리스트레스력을 가상일의 원리로 구하였고, 증가 프리스트레스를 고려한 내하율 산정식을 제시하였다. 제안된 내하율 산정식으로부터, 긴장재 개수와 초기 긴장력의 계산방법을 제시하였다. 본 방법을 2경간 강합성교량에 적용하여, 산정식의 타당성과 합리성을 검증하였다.

• Structural Engineering and Mechanics
• /
• 제52권4호
• /
• pp.687-699
• /
• 2014

Based on the energy method considering the second order effects, the natural frequencies of externally prestressed simply supported beam and the compression softening effect of external prestress force were analyzed. It is concluded that the compression softening effect depends on the loss of external tendon eccentricity. As the number of deviators increases from zero to a large number, the compression softening effect of external prestress force decreases from the effect of axial compression to almost zero, which is consistent with the conclusion mathematically rigorously proven. The frequencies calculated by the energy method conform well to the frequencies by FEM which can simulate the frictionless slide between the external tendon and deviator, the accuracy of the energy method is validated. The calculation results show that the compression softening effect of external prestress force is negligible for the beam with 2 or more deviators due to slight loss of external tendon eccentricity. As the eccentricity and area of tendon increase, the first natural frequency of the simply supported beams noticeably increases, however the effect of the external tendon on other frequencies is negligible.