• Polymer(Korea)
• /
• v.28 no.6
• /
• pp.538-544
• /
• 2004

Polyurethanes containing L-lysine segments in the main chain (PULL) were synthesized from 4,4'-diphenymethyl diisocynate, poly(tetramethylene glycol), and z-lysine oligomer as a chain extender. Insulin-immobilized polyurethanes (PULL-In) were prepared by a coupling reaction of PULL surface amino groups with insulins. The amount of immobilized insulin was about 0.30 nmol/$\textrm{cm}^2$, as determined by Bradford method. The interactions of NIH/3T3 fibroblasts with surface-modified PULLs were investigated using $^3$H-thymidine incoporation and optical microscopy. The cell growth rate on PULL-In film was higher than those on other substrates. The cell proliferation by the immobilized insulin was almost same as that by the free one.

• Elastomers and Composites
• /
• v.50 no.2
• /
• pp.87-91
• /
• 2015

Cure characteristics of non-oil-extended solution SBR (S-SBR_NO) and oil-extended solution SBR (S-SBR_ EO) compounds reinforced with silica/carbon black were investigated. Minimum and maximum torques of S-SBR_ EO compounds were much smaller than those of S-SBR_NO ones. Delta torques of S-SBR_NO compounds were greater than those of S-SBR_EO ones, and that of S-SBR_NO compound increased with increase in the 1,2-unit content. Optimum cure time ($t_{90}$) of S-SBR compound decreased with increase in the 1,4-unit content, whereas it increased with increase in the 1,2-unit content. Cure rate index of S-SBR compound increased with increase in the 1,4-unit content, whereas it decreased with increase in the 1,2-unit content. Comparing cure characteristics of S-SBR_NO and S-SBR_EO compounds with the same 1,2-unit content, $t_{90}$s of S-SBR_EO compounds were longer than those of S-SBR_NO ones and cure rate indices of S-SBR_EO compounds were smaller than those of S-SBR_NO ones.

• Journal of Adhesion and Interface
• /
• v.12 no.1
• /
• pp.11-15
• /
• 2011

In this study we synthesized low VOC-solvent soluble thermo plastic polyurethane, The effect of chain extender and NCO/OH ratio for properties of thermoplastic polyurethane was investigated. Also, we prepared low VOC-type primer by TPU and acrylic modified tackifier resin. When NCO/OH ratio was 2 or more, TPU was insoluble in low VOC solvent. And peel strength was higher value using polar type tackifier than non-ploar type tackifier.

• Elastomers and Composites
• /
• v.44 no.1
• /
• pp.69-75
• /
• 2009

Asphalt sealants for the crack repair of asphalt concrete road were prepared using waste lubricant oil in this work. The waste lubricant oil was compounded with asphalt(AP-5), SBS triblock copolymer, a tackifying agent(petroleum resin), and antioxidants. Cone penetration, softening point, ductility, elongation by tensile adhesion, and resilience of asphalt sealant compounds were measured. Cone penetration of asphalt sealant compounds increased with the increase of waste lubricant oil content while their softening point, ductility, and resilience decreased. By the addition of talc as an extender, softening point and resilience of asphalt sealants increased, but cone penetration, ductility, and elongation by tensile adhesion of those decreased with the proportion of talc content. The most economic asphalt sealant which could pass an ASTM specification could be manufactured by the big decrement of petroleum resin content.

• Korea journal of population studies
• /
• v.4 no.1
• /
• pp.23-35
• /
• 1981

Health policy is directed to equity in the provision of primary care for rural people before the year of 2, 000. This study aimed to define and identify the need for physician's care by using empirical data, and suggested an alternative of the primary care delivery system in rural areas to the government. 1. Twenty percent of the study population wanted to obtain any form of medical care services. : 9.3 percent of the population was in need for physician's care; 15 percent of the need was met by physicians, while 85 percent remained unmet at the time of survey in 1979. 2. For meeting all the need for physician's primary care, 2.9 annual physician visits per capita are demanded. An alternative, which was devised in some favourable way at reasonable cost in rural settings, was suggested. It was to deploy the physician extender such as community health practitioner in the infrastructure of the health care delivery system, whose supervision is provided by physician, based on experience of the KHDI health demonstration project. 3. One physician, two community health practitioners and two community health aides should be assigned in distant locations for meeting all the estimated need for physician's primary care for 10, 000 rural underserved residents.

• Elastomers and Composites
• /
• v.27 no.3
• /
• pp.161-173
• /
• 1992

A series of polyurethane block copolymers based on hydroxyterminated poly(dimethyl siloxane), poly(propylene glycol) and poly(tetramethylene glycol) soft segments of molecular weights 1,809, 2,000 and 2,000, respectively, were synthesized. The hard segments consisted of 4,4'-diphenylmethane diisocyanate and 1,4-butanediol as the chain extender. Samples with different molar ratios were prepared. We tried to synthesize poly(dimethyl siloxane)-based polyurethane(PDMS-PU) containing a hard block as major fraction and a soft block as minor fraction for preparing toughened rigid systems. After a study of the pure PDMS-PU, poly(propylene glycol)-based polyurethane(PPG-PU) and poly(tetramethylene glycol)-based polyurethane(PTMG-PU), (mixed polyol)-based block copolymers and blends between PDMS-PU, PPG-PU and PTMG-PU were prepared, and characterized by means of differential scanning calorimetry, tensile testing and scanning electron microscopy. In (mixed polyol)-based PU and in lower hard segment content blends, macro-phase separation was shown, but blends with higher hard segment contents showed significant reduction in amounts of phase separation.

• Journal of Microbiology and Biotechnology
• /
• v.17 no.5
• /
• pp.830-839
• /
• 2007

Pradimicins are potent antifungal antibiotics having an unusual dihydrobenzo[$\alpha$]naphthacenequinone aglycone substituted with D-alanine and sugars. Pradimicins are polyketide antibiotics produced by Actinomadura hibisca P157-2. The gene cluster involved in the biosynthesis of pradimicins was cloned and sequenced. The pradimicin gene cluster was localized to a 39-kb DNA segment and its involvement in the biosynthesis of pradimicin was proven by gene inactivation of prmA and prmB(ketosynthases $\alpha\;and\;\beta$). The pradimicin gene cluster consists of 28 open reading frames(ORFs), encoding a type II polyketide synthase(PKS), the enzymes involved in sugar biosynthesis and tailoring enzymes as well as two resistance proteins. The deduced proteins showed strong similarities to the previously validated gene clusters of angucyclic polyketides such as rubromycin, griseorhodin, and fredericamycin. From the pradimicin gene cluster, prmP3 encoding a component of the acetyl-CoA carboxylase complex was disrupted. The production levels of pradimicins of the resulting mutants decreased to 62% of the level produced by the wild-type strain, which indicate that the acetyl-CoA carboxylase gene would have a significant role in the production of pradimicins through supplying the extender unit precursor, malonyl-CoA.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.17 no.2
• /
• pp.282-288
• /
• 2014

In this research, we investigated synthetic method of 2,6-DANT that can be used as a chain extender of urethane/urea and epoxy materials in a demilitarization method via chemical transformations considering environmental, economical aspects and stability of process. We was able to identify through GC monitoring that 2,4-DANT and 2,6-DANT were produced when we inject 'hydrazine monohydrate 3.3 eq. by TNT 1 eq.' with a fine metering pump for 30 minutes and then, reflux for an additional 2 hours. We was able to isolate only 2,6-DANT(99.3% purity and 45.0% yield) from mixture of 2,4-DANT and 2,6-DANT through the separating and refining methods using 2,6-DANT solubility in methanol and crystallinity of 2,6-DANT.

• Transactions on Electrical and Electronic Materials
• /
• v.18 no.4
• /
• pp.211-216
• /
• 2017

The dielectric properties of two polyurethanes (PUs) with different hard segments, i.e., aromatic methylene di-p-phenyl diisocyanate (MDI) and aliphatic hexamethylene diisocyanate (HDI), were investigated in the temperature range of -100 to $100^{\circ}C$ and in the frequency range of 1 Hz to 3 kHz. The ${\alpha}$-relaxations induced by the glass transition of the equivalent soft segments in the two PUs occurred at relaxation times of ${\tau}=3.46{\times}10^{-3}s$ for MDI-PU and ${\tau}=3.39{\times}10^{-2}s$ for HDI-PU at $-20^{\circ}C$, in accord with the temperature-frequency superposition principle, resulting in similar shifting factors. However, different I-relaxations were observed for the two PUs. The I-relaxation of MDI-PU occurred due to the mobility of the chain extenders near $80^{\circ}C$ with a slower shifting rate than the ${\alpha}$-relaxation. On the other hand, I-relaxation arising from both the extender and the unconstrained hard segments of HDI-PU occurred at $70{\sim}100^{\circ}C$, indicating complicated dielectric behavior due to partial interaction with the ${\alpha}$-relaxation at high frequencies. Thus, the I-relaxation of HDI-PU did not follow the superposition principle. The dielectric behaviors of the PUs were mainly influenced by their phase transitions, which were affected by the structure and components of the materials.

• Korean Journal of Materials Research
• /
• v.4 no.7
• /
• pp.823-827
• /
• 1994

The mechanical properties of diglycidyl ether of bisphenol A(DGEBA)/4,4- methylene dianiline(MDA) system with the addition of malononitrile(MN) and hydroquinone(HQ) were investigated. The specimens which were prepared by curing at $150^{\circ}C$ for lhr after curing at $80^{\circ}C$ for 1.5hr were tested. The effects of MN as a chain extender and HQ, a reaction accelerator on the mechanical properties were investigated. With the increase of MN and HQ contents, impact property improved significantly but tensile property decreased.