Kim, Moon-Chan;Park, Warn-Gyu;Chun, Ho-Hwan;Jung, Un-Hwa
International Journal of Naval Architecture and Ocean Engineering
/
v.2
no.1
/
pp.1-13
/
2010
A comparative study between a computation and an experiment has been conducted to predict the performance of a Pod type waterjet for cm amphibious wheeled vehicle. The Pod type waterjet has been chosen on the basis of the required specific speed of more than 2500. As the Pod type waterjet is an extreme type of axial flow type waterjet, theoretical as well as experimental works about Pod type waterjets are very rare. The main purpose of the present study is to validate and compare to the experimental results of the Pod type waterjet with the developed CFD in-house code based on the RANS equations. The developed code has been validated by comparing with the experimental results of the well-known turbine problem. The validation also extended to the flush type waterjet where the pressures along the duct surface and also velocities at nozzle area have been compared with experimental results. The Pod type waterjet has been designed and the performance of the designed waterjet system including duct, impeller and stator was analyzed by the previously mentioned m-house CFD Code. The pressure distributions and limiting streamlines on the blade surfaces were computed to confirm the performance of the designed waterjets. In addition, the torque and momentum were computed to find the entire efficiency and these were compared with the model test results. Measurements were taken of the flow rate at the nozzle exit, static pressure at the various sections along the duct and also the nozzle, revolution of the impeller, torque, thrust and towing forces at various advance speed's for the prediction of performance as well as for comparison with the computations. Based on these measurements, the performance was analyzed according to the ITTC96 standard analysis method. The full-scale effective and the delivered power of the wheeled vehicle were estimated for the prediction of the service speed. This paper emphasizes the confirmation of the ITTC96 analysis method and the developed analysis code for the design and analysis of the Pod type waterjet system.
The main function of plastic materials in food packaging is to preserve a food for safe transportation and storage. The interactions between food and plastic materials in food packaging have become increasingly important for food quality and safety because monomer, low molecular weight components, or additives of plastic packaging materials can migrate into a food. The use of antioxidants in plastic materials can help protect the degradation of film itself and retard the oxidation of a packaged food containing lipid, through the migration of antioxidant from the packaging to a product via an evaporation / sorption mechanism. Nowadays, antioxidant (BHT) impregnated plastic materials are used for commercial food packaging application with the intention of achieving an extended shelf life of food in USA. Alpha tocopherol, as one of the most important free radical scavengers, has been well known in biological systems. Moreover, the potential use of alpha tocopherol as an additive for polymers used in the packaging industry may offer the most positive perception from both consumers and manufacturers. Alpha tocopherol has been used as an antioxidant for polyolefin resins fabricated to both bottles and film and has applications in the food packaging industry as a replacement for BHT. Today, alpha tocopherol offers an attractive choice for use as an antioxidant in polymers. This paper provides an overview of antioxidant effectiveness and applications for its use by the food packaging industry based on the evaporation-sorption mechanism of a packaging model product, where quality is associated with lipid oxidation. Important analytical techniques for predicting antioxidant interaction between the package system and product are discussed.
이동 컴퓨팅 환경에서 자주 접근하는 데이터에 대한 캐싱은 무선 채널의 좁은 대역폭에서 경쟁을 줄일 수 있는 유용한 기술이다. 그러나, 트랜잭션 캐시 일관성을 지원하는 전통적인 클라이언트/서버 전략은 클라이언트와 서버간에 많은 양의 통신을 필요로 하기 때문에 이동 클라이언트/서버 컴퓨팅 환경에서는 적절하지 않다. 본 논문에서는 브로드캐스트-기반 캐시 무효화 정책을 사용하면서 트랜잭션 캐시 일관성을 지원하는 OCC-UTS (Optimistic Concurrency Control with Update TimeStamp) 프로토콜을 제안한다. 접근한 데이터에 대한 일관성 검사 및 완료 프로토콜은 캐시 무효화 과정의 내부 과정으로 완전 분산 형태로 효율적으로 구현되며, 일관성 체크의 대부분이 이동 클라이언트에서 수행된다. 또한, 분석 모델에 기반한 성능 비교를 통해, 본 논문에서 제안하는 OCC-UTS 프로토콜이 다른 경쟁 프로토콜보다 높은 트랜잭션 처리율을 얻으며, 데이터 항목을 자주 접근하면 할수록 지역 캐시를 사용하는 OCC-UTS 프로토콜이 더 효율적임을 보인다. 이동 클라이언트의 접속 단절에 대해서는 무효화 브로드캐스트 윈도우를 크게 하여 접속 단절에 적절히 대처할 수 있다.Abstract In a mobile computing environment, caching of frequently accessed data has been shown to be a useful technique for reducing contention on the narrow bandwidth of the wireless channels. However, the traditional client/server strategies for supporting transactional cache consistency that require extensive communications between a client and a server are not appropriate in a mobile client/server computing environment. In this paper, we propose a new protocol, called OCC-UTS (Optimisitic Concurrency Control with Update TimeStamp), to support transactional cache consistency in a mobile client/server computing environment by utilizing the broadcast-based solutions for the problem of invalidating caches. The consistency check on accessed data and the commitment protocol are implemented in a truly distributed fashion as an integral part of cache invalidation process, with most burden of consistency check being downloaded to mobile clients. Also, our experiments based on an analytical model substantiate the basic idea and study the performance characteristics. Experimental results show that OCC-UTS protocol without local cache outperforms other competitor protocol, and the more frequent a mobile client accesses data items the more efficient OCC-UTS protocol with local cache is. With respect to disconnection, the tolerance to disconnection is improved if the invalidation broadcast window size is extended.
Background : In many Nursing Delivery System, Nursing Department at D Hospital had used to traditional nursing practice model what is called functional activities based system. It has a lot of merit that carried out specialized and rapid works but tend to ignore indivisual professional responsibility and task-based work assignments. In addition this system showed high turnover rates due to heavy workload, timesum of handing over duties, lack of support from peers and interstaff communication. So we performed conversion of Nursing Delivery System to My Patients Nursing Care System for providing comprehensive nursing to patient and reducing turnover rates and increasing job satisfaction to nurse. Method : 1. 1st step(96.4.9): Detected the problem of Nursing delivery System and estabilished improving planning 2. 2nd step(96.4.26): Visited other hospital on job training 3. 3th step(96.4.29): Discussed to premonitoring problem after conversion Nursing Delivery System and prepared structure 4. 4th step(96.5.6): My Patients Nursing Care System practical application 5. 5th step(96.7.20): Held complementary meeting 6. 6th step(96. 7): The other ward application 7. 7th step(96. 10): Extended application to whole wards Results: 1. Workload: (1) reduction(55.6%) (2) addition(44.4%) 2. Strong points after conversion: (1) decreased timesum of handing overduties (35.2%) (2) increased responsibility(33%) (3) broaden nurse's outlook to duties(14.8%) 3. Shortcoming after conversion: (1) understanding difficulties except my patient(57.8%) (2) weak teamwork(23.3%) (3) intensive stress to low grade nurse(12.2%) 4. Effective complemental way: (1) manpower(76.7%) (2) conversion of though (8.9%) (3) education(14.4%) 5. Patient's satisfaction: (1) satisfaction(64%) (2) no effect(36%) 6. Physician and peer's satisfaction: (1) satisfaction(12.5%) (2) dissatisfaction(21.6%) (3) no interest(44.3%) 7. Nurse's satisfaction: (1) satisfaction(74.7%) (2) dissatisfaction(5.5%) (3) unknown(20.5%) 8. Want to continued: (1) want(76.4%) (2) try to any other system(18%) Conclusion : Even though Nursing Delivery System conversion still has many problem, we gained more merits than traditional nursing delivery system. So we suggest that My Patients Nursing Care System should be encouraged for comprehensive nursing care and satisfaction to nurses.
For general nonlinear processes, it is difficult to control with a linear model-based control method and nonlinear controls are considered. Among the numerous approaches suggested, the most rigorous approach is to use dynamic optimization. Many general engineering problems like control, scheduling, planning etc. are expressed by functional optimization problem and most of them can be changed into dynamic programming (DP) problems. However the DP problems are used in just few cases because as the size of the problem grows, the dynamic programming approach is suffered from the burden of calculation which is called as 'curse of dimensionality'. In order to avoid this problem, the Neuro-Dynamic Programming (NDP) approach is proposed by Bertsekas and Tsitsiklis (1996). To get the solution of seriously nonlinear process control, the interest in NDP approach is enlarged and NDP algorithm is applied to diverse areas such as retailing, finance, inventory management, communication networks, etc. and it has been extended to chemical engineering parts. In the NDP approach, we select the optimal control input policy to minimize the value of cost which is calculated by the sum of current stage cost and future stages cost starting from the next state. The cost value is related with a weight square sum of error and input movement. During the calculation of optimal input policy, if the approximate cost function by using simulation data is utilized with Bellman iteration, the burden of calculation can be relieved and the curse of dimensionality problem of DP can be overcome. It is very important issue how to construct the cost-to-go function which has a good approximate performance. The neural network is one of the eager learning methods and it works as a global approximator to cost-to-go function. In this algorithm, the training of neural network is important and difficult part, and it gives significant effect on the performance of control. To avoid the difficulty in neural network training, the lazy learning method like k-nearest neighbor method can be exploited. The training is unnecessary for this method but requires more computation time and greater data storage. The pH neutralization process has long been taken as a representative benchmark problem of nonlin ar chemical process control due to its nonlinearity and time-varying nature. In this study, the NDP algorithm was applied to pH neutralization process. At first, the pH neutralization process control to use NDP algorithm was performed through simulations with various approximators. The global and local approximators are used for NDP calculation. After that, the verification of NDP in real system was made by pH neutralization experiment. The control results by NDP algorithm was compared with those by the PI controller which is traditionally used, in both simulations and experiments. From the comparison of results, the control by NDP algorithm showed faster and better control performance than PI controller. In addition to that, the control by NDP algorithm showed the good results when it applied to the cases with disturbances and multiple set point changes.
This research was conducted to find out about the effects of a perceived usefulness and a perceived ease of use on the viewer's attitude and their intention to use of the Terrestrial UHD Broadcasting. The survey was conducted with 191 respondents while innovativeness, relative advantage, active engagement, accessibility and affinity were considered as the external variables for this research. As the result shows, the external variables that affect the perceived usefulness are affinity, relative advantage, and innovativeness. However, it was confirmed that the accessibility has no major effect on the perceived usefulness. Among the external variables, the innovativeness has the highest level of effectiveness on the perceived usefulness of UHD broadcasting. Relative advantage, active engagement, and affinity were followed in orderly fashion. Especially, the perceived ease of use on UHD broadcasting has a major effect on the perceived usefulness. Also, the perceived usefulness affects the viewers' attitude and their intention to use. And the research verified that there is no correlation between the perceived ease of use vs. attitude and between attitude vs. intention to use. Therefore, we can safely say that the perceived usefulness of UHD broadcasting has main effects on viewers' attitude and their intention to use of UHD broadcasting.
Meniscus, adsorbed layer thickness, capillary pressure and disjoining pressure was deduced in extended meniscus region in cement paste pore by hydrostatic equilibrium. From the results, the relationship between pore size and adsorbed layer thickness could be derived and adsorbed layer thickness represents $0.299{\sim}2.700nm$ according to pore size $1nm{\sim}1{\mu}m$. Especially, disjoining pressure rapidly Increased in less than 10 nm pore size according to adsorbed layer thickness. Therefore, it is interpreted that autogenous shrinkage of cement paste is highly increases in formation of less than 10 nm pore size. Predictions of autogenous shrinkage in cement paste considering driving force for autogenous shrinkage with capillary pressure and disjoining pressure was low in comparison with experiment values between $1{\sim}4$ days and high in later period. These tendency could be thought that pore damage by mercury injection in early age makes shrinkage driving force underestimate and assumption for unsaturated independent pore makes overestimate. These interactions might be needed corrections considering on hydration or pore replacement model.
Park, Ji-Woong;Kim, Joung-Joon;Yun, Jae-Kwan;Han, Ki-Joon
Journal of Korea Spatial Information System Society
/
v.7
no.1
s.13
/
pp.25-37
/
2005
Recently, with the development of wireless communications and mobile computing, interest about mobile computing is rising. Mobile computing can be regarded as an environment where a user carries mobile devices, such as a PDA or a notebook, and shares resources with a server computer via wireless communications. A mobile database refers to a database which is used in these mobile devices. The mobile database can be used in the fields of insurance business, banking business, medical treatment, and so on. Especially, LBS(Location Based Service) which utilizes location information of users becomes an essential field of mobile computing. In order to support LBS in the mobile environment, there must be an Embedded Spatial MMDBMS(Main-Memory Database Management System) that can efficiently manage large spatial data in spatial mobile devices. Therefore, in this paper, we designed and implemented the Embedded Spatial MMDBMS, extended from the HSQLDB which is an existing MMDBMS for PC, to manage spatial data efficiently in spatial mobile devices. The Embedded Spatial MMDBMS adopted the spatial data model proposed by ISO(International Organization for Standardization), provided the arithmetic coding method that is suitable for spatial data, and supported the efficient spatial index which uses the MBR compression and hashing method suitable for spatial mobile devices. In addition, the system offered the spatial data display capability in low-performance processors of spatial mobile devices and supported the data caching and synchronization capability for performance improvement of spatial data import/export between the Embedded Spatial MMDBMS and the GIS server.
Journal of the Institute of Electronics Engineers of Korea SP
/
v.44
no.2
s.314
/
pp.46-54
/
2007
In current printer industry, four or more colorants are added for color gamut extension because the gamut of printer is smaller than other devices. However, these additional colorants make a redundancy problem that several combinations of colorants reproduced same color stimulus in colorimetric inverse characterization process. Thus, we propose a method of colorimetric inverse characterization using color correlation between colorant's amount. First, for analyzing the combination of colorants which represent the same color stimulus, we estimate the color stimulus for all combination of colorants by Cellular Yule-Nielsen Spectral Neugebauer printer model. The combination of colorants which has higher color correlation factor comparing combinations of colorant around itself in color space is selected. It can reduced the color difference from the tetrahedral interpolation process which is estimation of the output value(colorants combination) for arbitrary input(color stimulus). The selected combinations of colorants and their color stimulus are stored to the lookup table. In experiment, the CMYKGO printer was used. As a result, the dark region of color gamut was extended and the color tone was more naturally represented.
In this study, transaction cost approach was applied to analysis on direct export determinants of SMEs by using key attributes of transactions, asset specificity, environmental uncertainty, frequency and marketing capability, with a parameter of opportunism. Typical Transaction Cost Analysis theory explains that when transaction cost with business channels(whether it is for buy or sell) increase, the firms integrate the channels. So it is a choice made by firms regarding direct versus indirect channels. The theory was extended to a model of choice of institutional form of direct or indirect export by a norm of opportunism in this empirical study. The survey result showed that lower level of asset specificity and marketing capability or higher level of environmental uncertainty were likely to expose indirect exporters to higher level of opportunism of direct exporter. And we also saw that indirect exporters were likely to choose direct export chanel when opportunism of exporters was higher. From the standpoint of theory, we can say that the basic propositions of the Transaction Cost Analysis, except the attribute of frequency, are supported. This study result could provide a profiling of target business areas and firms for government's policy on direct export promotion of SMEs.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.