• 산업기술연구
• /
• 제27권A호
• /
• pp.85-94
• /
• 2007

This study, regarding curved channel, was performed to compare and analyze hydraulic characteristics and the speed of water and water level for left bank and right bank through hydraulic model experiments and numerical analysis. Real channels that had characteristics of curved channel were selected as objectives. In order to easily operate one and two dimensional numerical analysis and comparison for total 2.4Km model channel, measuring point was set up as 200m. HEC-RAS model was applied as one dimensional numerical analysis program and SMS model was used as two dimensional numerical analysis program. In respect of speed of water, the average speed of water for right bank recorded 8.33m/s in a model experiment and 3.08m/s, 8.57m/s were average speed of water for right bank in one dimensional and two dimensional numerical analysis. The average speed of water of two dimensional numerical analysis was quite similar to that of model experiments. Also, as for water level, maximum observational errors between one and two dimensional numerical analysis for right and left bank of model experiments were 0.66m, 0.84m and 0.28m, 0.48m for each. It was found that two dimensional numerical analysis had a similar result to hydraulic model experiments. Accordingly, from the result of this study, two dimensional numerical analysis should be used rather than one dimensional numerical analysis, when numerical analysis for curved channel is conducted.

• 산업기술연구
• /
• 제27권B호
• /
• pp.229-233
• /
• 2007

This research investigated the way of generating the flowing of water in case of artificial fluctuation of river width by the unidimensional numerical analysis in order to reconstruct vertical and expanse features of flowing, and the problem of existing numerical analysis in accordance with local enlargement and reduction of river through hydraulic model experiments with results of numerical analysis. The result revealed that when the local section change in the same river is exist, it showed 0.93m in the case of no change of local section in the hydraulic model experiments and numerical analysis, however, it presented 1.645m on the occasion of local section changes in the hydraulic model experiments and numerical analysis. In other words, there was a significant difference in the existing numerical analysis, when there was a local section change. As a result of the experimental section for the enlargement and reduction of local river width, due to the sensitive change for fluctuation of flood discharge, there was a significant difference between numerical analysis and hydraulic model experiments. In addition, the result of comparison between the enlargement and reduction of local river width confirmed that the result of numerical analysis with hydraulic model experiments showed larger generation of deviation in case of enlargement of section than in case of reduction of section.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2008년도 학술발표회 논문집
• /
• pp.1818-1822
• /
• 2008

여수로와 같은 3차원 수리구조물을 설계하고 수리현상을 조사하거나, 형상 및 안정성을 파악하기 위해서는 일반적으로 수리모형실험을 통하여 실제 현상을 모의하는 경우가 많다. 그러나 수리모형실험을 하기 위해서는 많은 시간과 비용 및 공간이 필요하며 실제 수리구조물을 축소시켜 측정하는 것은 대단히 어렵고 표면장력 등이 실험결과에도 상당한 영향을 미칠 수 있으며 다양한 경우의 실험은 현실적으로 불가능하다. 따라서, 수치해석을 통하여 적정한 초기결과를 도출할 필요성이 있으며, 이를 통하여 수리모형실험의 대상을 결정하고 결과를 비교한다면 경제적이고 합리적인 수리구조물의 설계와 평가가 가능하다. 본 연구에서는 최적의 여수로를 설계하기 위하여 월류형 여수로를 대상으로 수치해석을 수행하였고, 수리모형실험에 대한 실험적인 접근을 통하여 수리적 조건을 향상시킬 수 있는 보다 나은 설계안을 제시하였다. 이러한 수리모형실험 계측결과를 통하여 개선된 수리구조물 설계안을 제안하였고, 개선된 설계안에 대한 개선효과를 조사하였다.

• 한국해안해양공학회지
• /
• 제14권3호
• /
• pp.240-246
• /
• 2002

타원형 천퇴해역에 대한 규칙파 및 일방향 불규칙파의 전파변형에 대한 수리모형실험을 수행하였다. 수리모형실험은 비쇄파조건의 규칙파와 천퇴의 정상부에서 부분쇄파가 발생하는 일방향 불규칙파를 대상으로 수행되었다. 수리모형실험 조건에 대해 포물형근사식을 적용한 수치해석을 수행하여 실험결과와 비교하였다.

• Ocean and Polar Research
• /
• 제26권4호
• /
• pp.647-653
• /
• 2004

Experimental studies with 4.3m and enlarged 30m in height have been conducted to investigate the flow characteristics of solid-liquid mixture in a lifting pipe and to acquire the design data for sea tests that will be performed in the future. From the results, it was observed that the more the discharged volume fraction and the solid diameter increase, the more the hydraulic gradient increases. Also, the more the diameter of the lifting pipe increases, the smaller the friction loss, and consequently, the less pressure drop and hydraulic gradient. From the enlarged hydraulic pumping experiments, it was shown that the results of the experiments were matched with those of the numerical model previously developed. On the bases of these studies, we plan to conduct further experiments and validate the hydraulic pumping model.

• 한국수자원학회논문집
• /
• 제36권5호
• /
• pp.811-821
• /
• 2003

본 연구에서는 수리모형실험을 실시하여 방류관의 흐름특성을 분석 방류관 설계의 적정성을 검토하는데 있다. 수리모형실험 결과 기본계획의 방류관 통수능은 과소설계 되었고, 이를 토대로 설계 변경한 기본설계의 방류관 통수능 설계치는 실험치와 거의 일치하여 적절하게 설계되었음을 알 수 있었다. 또한 방류관 부압발생 여부 및 종단형상의 적정성을 검토한 결과 허용치 이내 값이 발생되어 적절한 것으로 판명되었다. 이러한 과정을 토대로 기본설계의 방류관 규모 및 위치가 적절하였음이 검토되었다.

• 한국안전학회지
• /
• 제31권1호
• /
• pp.41-47
• /
• 2016

The rolling stock is composed of several cars. In order to operate in combination, it is necessary to connect the device, called coupler, between the rolling stocks. When the collision occurs between cars, couplers should be able to absorb the shock. Urban railway has used only rubber absorbers. But recently, the hydraulic buffer has been considered in general railway. In order to know the performance of the buffer it should be conducted to experiments. But whenever this combination change, we should experiments to know a lot of the dynamic behavior of each coupler. These experiments are generally replaced by the simulation, since a lot of time and cost consuming. The quasi-static map of hydraulic buffer obtained by the experiments is required for the simulation. However, the experiments for obtaining such a quasi-static map is costly and time consuming. In this paper, it proposes a method for deriving the quasi-static map of hydraulic buffer from the theoretical model.

• 한국정밀공학회지
• /
• 제13권7호
• /
• pp.78-89
• /
• 1996

This paper discusses automation of a small-scale hydraulic shovel and its trajectory control. To move an end-effect (grinder) along a desired trajectory, the controller uses PID(proportional-integral- defferential) control and internal pressure of hydraulic cylinder. To apply PID control in the present hydraulic system, the system model is derived physically and its system parameters are obtained by actual measurement. To show the effectiveness of the PID controller and propriety of system model, the computer simulations and experiments are performed. These results of the simulations and experiments indicate that the PID trajectory control of robotic deburring by hydraulic shovel is very effective.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• 제3권1호
• /
• pp.57-73
• /
• 1999

Baroclinic hydraulic model experiments on the time-varying states of the flow pattern and water exchange in Sagami Bay were carried out based on quasi-steady state experiments on the flow pattern. For the model experiments, density changes as well as time changes in the volume transport of the upper layer were executed to investigate the flow response of the bay in the case of a sudden inflow of low density water and variable volume transport into the Sagami Bay. The results of the model experiments showed that when the volume transport was increased frontal eddies or frontal wave streamers from the Kuroshio Through Flow were transferred to the inner part of the bay along with cyclonic circulation in the bay. In addition, density boundary currents appeared and flowed along the eastern boundary of the bay. As the upper layer density decreased, frontal eddies, frontal streamers and coastal boundary density currents occurred and proceeded along the eastern boundary of the bay at a high speed.

• 한국수자원학회논문집
• /
• 제38권3호
• /
• pp.179-188
• /
• 2005

본 연구에서는 화북다목적댐을 대상으로 2차원, 3차원 수치모형실험이 수리모형실험과 더불어 설계자에게 유용한 해석도구로 사용될 수 있음을 보였다. 2차원, 3차원 수치모형으로 천수방정식을 지배방정식으로 하는 RMA2와 RANS를 지배방정식으로 하는 FLOW-3D 모형을 이용하였다. 수몰지역과 접근수로에서의 유황, 월류웨어의 방류능력, 월류부, 도류부, 감세지에서의 수면형상, 월류부에서의 압력분포에 대한 수치모의 결과를 수리모형실험 결과와 비교하였다. 비교 결과, 대부분의 경우에 수치모의 결과는 수리모형실험 결과를 잘 재현하는 것으로 나타났다 그러나, 감세지에서의 도수현상에 대한 수치모의 결과는 공기연행효과로 인해 수리모형실험 결과와 다소 차이가 발생하는 것으로 나타났다.