• 혜화의학회지
• /
• 제8권2호
• /
• pp.107-122
• /
• 2000

As a result of studing on the "shashen(沙蔘)", we could reach conclusions as follows. 1. Shashen is the root of "lunyeshashen(潤葉沙蔘)", "kuoyeshashen(闊葉沙蔘)", and its same generic plants that belong to Companulaceae. In china people has used twenty-four species as a shashen together with other generic plants, in korea sixteen species as a shashen. 2. At first, in the "Shen Nong's Herbal(神農本草經)" it was recorded and then in the "Benchingfengyuan(本經逢原)" divided into "nanshashen(南沙蔘)" and "beishashen(北沙蔘)". Recently, nanshashen called shashen belongs to Companulaceae and have strong efficacies of clearing away heat from lung, resolving phlegm, beishashen belongs to Umbelliferae and have strong efficacies of nourishing stomach, nourishing yin. 3. Shashen is the root of Adenophora stricta Miq., and yangru(羊乳) is that of Codonopsis lauceolata Bentham et Hooker, jini is that of Adenophora remotiflora (SIEBOLD et ZUCCARINI.) MIQUEL. From a efficacious point of view, it is the characteristics that shashen have efficacies of nourishing yin and clearing away heat from lung, supplementing stomach and promoting production of body fluid, resolving phlegm and relieving cough, eliminating pus and abscess, expelling wind and pruritus, jini have those of clearing away heat and toxic material, resolving phlegm and yanru have those of nourishing yin and moistening lung, resolving phlegm and eliminating pus, clearing away heat and toxic material, stimulating milk secretion. 4. After being recorded as "zhimu(知母)" in Shen Nong's Herbal, the alias of shashen was recorded as kuxin(苦心), shimei(識美), huxu(虎須), baishen(白參), zhiqu(志取), wenhu(文虎), baolishen(保利參), paoshen(泡參), jibantui(鷄半腿), yangponai(羊婆妨) and so on. Moreover shashen was named after its characteristics of that it grows well in the sandy soil and as a wushen(五參) with a renshen(人蔘) its form is different from that of wushen but their chief virtues are alike. 5. In the numerous medical books, xinyeshashen(杏葉沙蔘) regarded as nanshashen. It was called as the alias of jini, so I thouhgt that it was wrong xinyeshashen to be regarded as nanshashen. 6. It was used shashen for renshen, renshen was used to treat lung-cold syndrome by its efficacy of tonifying yang and shashen lung-heat syndrome by its efficacy of nourishing yin, the reasons of that because shashen had amount of sap, its properies and flavours of herbs are light and clean. 7. The constituents of shashen were essential oil, starch, shashen-saponin, furocoumarin, xanthotoxin(ammoidin), inulin, sugar, mucus and have efficacies of resolving phlegm, promoting production of body fluid, immunomodulational and antibiotic efficacies. above results indicated that the origin of shashen and substitutional plants was various. Their efficacies are somewhat alike, but there were characteristic efficacies each other. Nowadays they are used together with, so we should know the characteristic efficacies of them and then we using them clinically, more deep discrimination and experimental support shoud be accomplished.

• 대한치과보철학회지
• /
• 제41권4호
• /
• pp.421-439
• /
• 2003

Statement of problem : It is difficult to obtain a good titanium casting body using the traditional sprue design because of high melting point of Ti, and the low fluidity and high reactivity of molten Ti. Purpose : A new sprue design for titanium casting bodies needs more trial and error. In order to decrease the number of trial and error, computer simulation(MAGMASOFT, Magmasoft Giessereitechnologie GmbH, Achen, Germany) was used to optimize sprue design in U-shaped implant superstructures. Material and method : Five kinds of sprue were examined for the design of the sprue former for titanium casting: Sprue design A(sprue length 4 mm, rectangular shape, 4 sprues), Sprue design B(sprue length 4 mm. round shape. radius 2 mm, 7 sprues), Sprue design C (sprue length 2 mm, round shape, radius 2 mm, 7 sprues). Sprue design D (sprue length 2 mm, cone shape, large radius 3mm. small radius 2mm, 7 sprues), and Sprue design E( sprue length 2 mm. one unit channel shape). Sprue design F(sprue length 2mm, one unit channel shape) was also examined for the design of the customized sprue former in the Biotan system(Schutz Dental Gmbh, Germany). The casting bodies were taken in Sprue design A, Sprue design D, Sprue design E, and Sprue design F in the Biotan casting system. The numerically predicted defects were compared with the experimental dental castings by the radiographic and sectional view observations. Results : 1. According to the result of computer simulation, turbulence during mold filling was decreased in the sequence of Sprue design F, Sprue design E, Sprue design D, Sprue design C, Sprue design B, and Sprue design A. 2. The calculated solidification time contours indicate that hot spot was moved from the casting body to the sprue button in the sequence of Sprue design A, Sprue design B, Sprue design C, Sprue design D, and Sprue design E. The filling pattern of Sprue design F was similar to that of Sprue design E. 3 The predicted filling pattern shows that less turbulence was found in the customized sprue former than in the standard sprue former. 4. According to the results of the radiographic and cross sectional observations, casting defects less than 1mm were found at the center of a casting body with Sprue design E and Sprue design F. However, larger casting defects of 4mm were found in a casting with Sprue design A. 5. The predicted casting porosity was similar to that of the real casting. Conclusion : One unit channel-type and customized sprue former can be recommended. Further research and developement of various sprue designs using computer simulation in necessary to optimize casting design, in order to reduce the formation of casting defects in implant titanuim super-structures.

• 한국환경과학회지
• /
• 제20권10호
• /
• pp.1273-1284
• /
• 2011

The aim of this research was to evaluate the performance of insoluble electrode for the purpose of degradation of Rhodamine B (RhB) and oxidants generation [N,N-Dimethyl-4-nitrosoaniline (RNO, indicator of OH radical), $O_3$, $H_2O_2$, free Cl, $ClO_2$)]. Methods: Four kinds of electrodes were used for comparison: DSA (dimensional stable anode; Pt and JP202 electrode), Pb and boron doping diamond (BDD) electrode. The effect of applied current (0.5~2.5 A), electrolyte type (NaCl, KCl and $Na_2SO_4$) and electrolyte concentration (0.5~3.5 g/L) on the RNO degradation were evaluated. Experimental results showed that the order of RhB removal efficiency lie in: JP202 > Pb > BDD ${\fallingdotseq}$ > Pt. However, when concerned the electric power on maintaining current of 1 A during electrolysis reaction, the order of RhB removal efficiency was changed: JP202 > Pt ${\fallingdotseq}$ Pb > BDD. The total generated oxidants ($H_2O_2$, $O_3$, free Cl, $ClO_2$) concentration of 4 electrodes was Pt (6.04 mg/W) > JP202 (4.81 mg/W) > Pb (3.61 mg/W) > BDD (1.54 mg/W), respectively. JP202 electrode was the best electrode among 4 electrodes from the point of view of performance and energy consumption. Regardless of the type of electrode, RNO removal of NaCl and KCl (chlorine type electrolyte) were higher than that of the $Na_2SO_4$ (sulfuric type electrolyte) RNO removal. Except BDD electrode, RhB degradation and creation tendency of oxidants such as $H_2O_2$, $O_3$, free Cl and $ClO_2$, found that do not match. RNO degradation tendency were considered a simple way to decide the method which is simple it will be able to determinate the electrode where the organic matter decomposition performance is superior. As the added NaCl concentration was increases, the of hydrogen peroxide and ozone concentration increases, and this was thought to increase the quantity of OH radical.

• 한국해양공학회지
• /
• 제28권4호
• /
• pp.356-362
• /
• 2014

Wear and corrosion of the engine parts surrounded with combustion chamber is more serious compared to the other parts of the engine because temperature of the exhaust gas in a combustion chamber is getting higher and higher with increasing of using the heavy oil of low quality. Therefore, an optimum repair weldment as well as an available choice of the base metal for these parts are very important to prolong their lifetime in a economical point of view. It reported that there was an experimental result for repair weldment on the forged steel which would be generally used with piston crown material, however, it is considered that there is no study for the repair weldment on the cast steel of piston crown material. In this study, four types of electrodes such as 1.25Cr-0.5Mo, 0.5Mo Inconel 625 and 718 were welded with SMAW and GTAW methods on the cast steel which would be generally used with piston crown material. And the corrosion properties of weld metal, heat affected zone and base metal were investigated using electrochemical methods such as measurement of corrosion potential, anodic polarization curves, cyclic voltammogram and impedance etc. in 35% $H_2SO_4$ solution. In the cases of Inconel 625, 718, the weld metals and base metals exhibited the best and worst corrosion resistance respectively, however, 1.25Cr-0.5Mo and 0.5Mo indicated that corrosion resistance of the base metal was better than the weld metal. And the weld metal welded with electrodes of Inconel 625 revealed the best corrosion resistance among the electrodes, and Inconel 718 followed the Inconel 625. Hardness relatively also indicated higher value in the weld metal compared to heat affected zone and base metal. In particular, Inconel 718 indicated the highest value of hardness compared to other electrodes in the heat affected zone.

• 대한치과교정학회지
• /
• 제38권3호
• /
• pp.149-158
• /
• 2008

본 연구는 미니 임플란트 식립 후 교정력 부하시기와 관련하여 임플란트 주위골의 치유과정을 조사하였다. 성견 8마리의 하악 협측골에 교정용 미니 임플란트(ORLUS, Ortholution CO, Korea) 48개를 식립한 후 교정력을 주지 않은 대조군과 식립 후 즉시 교정력을 준 즉시 부하군, 그리고 식립 후 3주간의 치유기간을 두고 교정력을 준 지연 부하군으로 나누어 각각의 군에 대해 3주, 6주, 12주가 경과된 시점에 임플란트 주위골의 변화를 조직 계측학적으로 관찰하였다. 골 접촉률은 즉시 부하군에서 시기에 따른 유의한 변화가 없었으며 지연 부하군은 3주에 비해 12주에서 유의하게 증가하였다(p<0.05). 각 시점에서 군간의 골 접촉률을 비교했을 때 12주째 지연 부하군이 즉시 부하군 보다 유의하게 높았다(p<0.05). 골 면적비율은 즉시 부하군의 경우, 시기에 따른 유의한 변화가 없었으며, 지연 부하군과 대조군은 6주에 비해 12주째 유의한 증가를 보였으며 (p<0.05), 12주째 실험군 간에 유의한 차이는 관찰되지 않았다(p>0.05). 동요도는 12주째 즉시 부하군과 지연 부하군 간에 유의한 차이는 없었다(p>0.05). 위의 결과에서 즉시 부하가 self drilling형 미니 임플란트 주위골의 안정성에 부정적인 영향을 주지 않았으므로 식립 즉시 교정력을 부여하여 사용하는 데 임상적으로 문제가 없을 것으로 판단된다.

• 한국건설순환자원학회논문집
• /
• 제8권1호
• /
• pp.26-32
• /
• 2020

건설자원의 고갈과 콘크리트 폐기물의 증가에 따라 콘크리트 재활용은 선택적 사항이라기보다는 필수적 사항으로 되어 가고 있다. 콘크리트 재활용에 대한 연구는 오래 동안 다양한 관점에서 수행되어 왔다. 그러나 여러 나라의 기준이나 권고사항을 보면 순환골재 콘크리트의 적용에는 순환골재의 비율이나 순환잔골재의 사용금지 등과 같은 많은 제한사항이 있다. 본 연구에서는 구조부재에서 천연골재 콘크리트와 순환골재 콘크리트를 분리타설하는 방법에 대한 적절성을 알아보고자 하였다. 순환골재콘크리트의 제작 시 굵은골재의 치환비율은 50, 100%로 하였고 두 콘크리트의 접합면에는 교섭을 도입하였다. 순환골재 콘크리트를 제작하는 과정에서 순환골재를 처리하거나 혼화재를 첨가하지 않았다. 두 콘크리트 접합면의 전단강도를 평가하기 위해 등분포하중으로 재하한 2면전단 시험법을 채택하였다. 실험결과에 따르면 골재치환율이 큰 시험체가 전단강도 대 압축강도 비가 크게 나왔는데 이는 굵은골재의 크기와 전단절단면의 조도에 기인한 것으로 보인다. 여러 가지 변수들의 영향을 알아보기 위한 후속연구가 필요하며 그와 같은 연구 활동을 진행 중이다.

• 대한기계학회논문집B
• /
• 제34권4호
• /
• pp.409-416
• /
• 2010

순산소 연소와 배가스 재순환(FGR : Flue Gas Recirculation) 기술은 $CO_2$ 저감 목적으로 많은 연구자들의 관심을 받아왔다. 본 연구는 다공 동축 버너를 이용하여 산소 공급비(OFR : Oxygen Feeding Ratio)에 따른 순산소 연소 특성과 동일 조건에서 FGR 시스템을 모사하기 위하여 공급 위치에 따른 $CO_2$ 첨가 효과의 특성을 비교하는 데에 초점을 맞추었다. 순산소 연소는 당량비 0.93 에 해당하는 연료 유량 15lpm 일 때 OFR 전 영역에서 안정적이었고, 화염 구조와 길이는 OFR 에 따라 변동하였다. 순산소 연소에 $CO_2$ 를 첨가할 때, 안정, 천이, 준평형, 불안정 그리고 날림 등의 다양한 안정화 모드가 관찰되었으며, 연소로 내의 전반적인 온도분포가 감소하였고, 특히 case 4 에서 1800 K 이하로 떨어져 최대 감소 효과를 보였다. 노즐 끝단으로부터 높이에 따른 $CO_2$ 농도는 첨가된 $CO_2$ 의 체적 비율에 따라 변동하였다.

• The Korean Journal of Physiology
• /
• 제2권1호
• /
• pp.47-52
• /
• 1968

Twenty white rabbits anesthetized with nembutal (30 mg/kg) were employed in this experiment. Five of them served as controls; the remaining rabbits as experimental group were subjected to irreversible hemorrhagic shock. Shock was induced by bleeding the animals until mean blood pressure decreased to a level of 50-40 mmHg. This level of pressure was maintained for 3-4 hours, after which the drawn blood was reinfused. The reinfusion of blood caused the elevation of arterial pressure almost the control level for some minutes, after which a gradual and progressive decline of blood pressure became evident. This decline was thought to be the result from irreversible hemorrhagic shock. When mean blood pressure declined to less than 50 mmHg, chest was opened and samples of arterial blood and left ventricular muscle were taken. Left ventricular muscle and blood plasma were analyzed for potassium, sodium, chloride and water content. Blood glucose concentration was determined by Somogyi-Nelson's method. Extracellular and intracellular myocardial water and electrolyte content were calculated on the basis that electrolytes are distributed between plasma water and interstitial water according to Gibbs-Donnan equilibrium. In this calculation extracellular water was substituted for Na space. The findings obtained were as follows: 1. The concentration of blood glucose was 87mg% in the controls and it rose to 222 mg% in shock (P<0.01). 2. Plasma potassium elevated significantly from 3.3 mEq/l in controls to 8.0 mEq/l in shock (P<0.01), while small decreases in sodium (151-146 mEq/l) and chloride (102-96 mEq/l) were observed (P<0.3, P<0.1), 3. The changes of blood water content (83.1-84.3%) and cardiac water content (77.5-78.3 gm/100gm WT) were observed. 4. In control animals myocardial potassium levels which averaged 30.2 mEq/100 gmDT rose significantly to 40.3 mEq/100 gmDT in shock (P<0.01), while moderate decreases in sodium(16.3-14.3 mEq/100 gmDT) were observed in shock. 5. The calculated transmembrane resting potential of left ventricular muscle of control animals averaged 95 mV, while rabbits in shock averaged 77 mV. (P <0.01). The findings of this experiment do not correspond with the conclusions that myocardial depression seems to be the cause of irreversible hemorrhagic shock, because the excitability of heart muscle is elevated. From the point of view that the lowered transmembrane resting potential, the cause of death in terminal stage of irreversible hemorrhagic shock may be ventricular fibrillation. It can't be said, however, that the lowered transmembrane resting potential is responsible for the transition from reversible to irreversible hemorrhagic shock. The marked increase in blood glucose suggested that glycogenolysis in the liver is favorably active in shock.

• International Journal of Costume and Fashion
• /
• 제13권1호
• /
• pp.35-47
• /
• 2013

We know that humans are able to live comfortably when there is a balance between the living environment that surrounds us and us. Clothing, one of the necessities of life, serves a dual purpose of functioning as protection for the body as well as providing visual satisfaction, and so is the most effective bonding mechanism. A different type of comfort that has been provided through industrialization and advancements in technology has resulted in pollution problems in the environment, and it has reached a point of seriously thinking about its effects. The biggest problems in environmental pollution are air pollution and waste disposal, and something that cannot be ignored is that environmental hormones and harmful heavy metals have been discovered in the synthetic dyes used in the clothing product, and not only are they harmful to the body, but they also have adverse effects on skin allergies such as atopic dermatitis. Its effects on clothing, especially underwear and baby products, can become a serious issue. The use of natural vegetable dye can be considered the basis for the traditional Korean dyeing process, however not all natural dyeing process can be thought of as traditional Korean dyeing. This is because natural dyeing used to be the most common method of dyeing before synthetic dyes came along and became the dye of choice for most clothing. Natural dyes are beneficial to the body, and the nature colors, achieved from the natural materials, relieve eye strains as well as have a healing effect for people who are suffering from psychological instability such as stress. However, the use of mordant in order to increase the fastness and get better color effects can lead to even more damage to the environment, and it cannot be a dyeing method that is good for the body. Traditional natural dyeing is different from regular natural dyeing because it uses colors that the Korean people can identify with and applies specific methods in order to achieve those colors. Even though experimental study with dyestuff and practical use of the dyeing methods for traditional Korean dyeing has been started(Soh, H., 1983) and has been ongoing, it is still not easy for regular people to use the method on their own. At the present time, natural dye materials are getting made and sold more than ever, but there is a lot of confusion among consumers regarding the difference between traditional Korean dyeing and natural dyeing, as companies are using the two terms interchangeably to market their natural dye products. So getting a better understanding of the characteristics of traditional Korean dyeing and traditional colors should be considered first priority at this time. The purpose of this thesis is to study the traditional Korean view of color, which developed the culture of traditional dyeing in Korea, and the characteristics of traditional Korean dyeing, a method that pursued achieving Korea's color through natural dyeing.

• 청정기술
• /
• 제22권3호
• /
• pp.154-160
• /
• 2016

가스 하이드레이트 형성을 이용하여 담수를 생산하고자 하는 어떠한 공정이라도 가스 하이드레이트 형성속도는 경제적인 관점에서 매우 중요한 공정변수일 수밖에 없다. 이에 본 연구에서는 촉진제를 사용하여 R-134a(또는 HFC-134a) 가스 하이드레이트의 형성속도를 향상시키고자 하였는데 최종목표가 음용수 생산이므로 촉진제로 세가지 다른 형태의 식용 계면활성제를 선정하여 사용하였다. 음이온성인 카라기난(κ-carrageenan), 양쪽성인 레시틴(lecithin), 그리고 비이온성인 폴리소르베이트 80(polysorbate 80)이 그것이다. 식용 계면활성제의 농도를 변화시키면서 R-134a 가스 하이드레이트 형성속도가 어떻게 변하는지 관찰하였다. 어떠한 경우이든 식용 계면활성제의 첨가가 R-134a 가스 하이드레이트 형성속도를 향상시키는 것으로 관찰되었으며 그 효과는 폴리소르베이트 80 > 카라기난 > 레시틴의 순서를 보였다. 이론적인 설명을 위해 범밀도함수(DFT) 이론을 기반으로 한 분자모델링을 이용하여 각 식용 계면활성제를 구성하고 있는 원자들의 전하를 계산하였고 실험으로 관찰된 촉진제 효과가 계면활성제 내의 수소결합을 할 수 있는 산소들의 수와 그 산소들의 원자전하 값들이 음수인 정도에 비례하는 관계가 있음을 알 수 있었다.