• 제목/요약/키워드: Experimental p-y curve

검색결과 189건 처리시간 0.027초

원심모형 실험을 이용한 지반-말뚝 상호작용의 정적 및 동적 거동 평가 (Comparison of Lateral Pile Behavior under Static and Dynamic Loading by Centrifuge Tests)

  • 유민택;권선용
    • 한국지반공학회논문집
    • /
    • 제34권7호
    • /
    • pp.51-58
    • /
    • 2018
  • 본 연구에서는 하중 조건에 따른 지반-말뚝 상호작용 시스템의 거동 차이를 분석하기 위해 일련의 원심모형 실험을 수행하였다. 정적 하중 조건의 경우, 말뚝 직경의 50% 수준까지 변위제어를 통해 하중을 재하하였으며, 지진 하중 조건의 경우 0.1g~0.4g 수준으로 1Hz 정현파를 가진하였다. 실험 결과로부터 얻은 정적 및 동적 p-y 곡선을 API p-y 곡선과 비교한 결과, API p-y 곡선과 정적 하중조건에서의 실험 p-y 곡선은 최대 지반반력 값이 20% 이내의 오차를 보인 반면, 동적 하중 조건에서의 실험 p-y 곡선과는 최대 지반반력 값이 5배 이상 차이가 발생하였다. 이는 등가정적 해석에서 기존 API p-y 곡선을 적용할 경우 비선형 영역에서 지반 반력을 크게 과소평가하며 보수적 설계를 야기할 수 있음을 의미한다.

사질토층내 수평재하 말뚝의 거동해석에 관한 연구 (A Study on Analysis of Laterally Loaded Piles in Sand)

  • 정호교;임병조
    • 한국지반공학회지:지반
    • /
    • 제2권2호
    • /
    • pp.37-46
    • /
    • 1986
  • 본 연구는 사질토 지반내의 정적수평재대 pile의 거동을 예측하기 위해 g-y curve와 유한요소 비법에 의한 수치해석방법을 개발하기 위해 수행되었다. Winkier model에 의한 반력과 P-y curve에 의한 반력이 일치하는 soil modulus를 반복계산에 의하며 산정하였다. 유한요소기법에 의하여 각 절점간의 상호영향을 직접 고려할 수 있었다. 이 전산 Program을 과양제철소의 현장실측자료에 적용 하여 본 해석방법의 적합성을 검토하고 그 결과를 분석하였다.

  • PDF

1g 진동대 실험을 이용한 연약 점성토 지반에서의 동적 p-y 곡선 연구 (A Study on the Dynamic p-y Curves in Soft Clay by 1 g Shaking Table Tests)

  • 한진태;유민택;최정인;김명모
    • 한국지반공학회논문집
    • /
    • 제26권8호
    • /
    • pp.67-75
    • /
    • 2010
  • 본 연구에서는 연약 점성토 지반에 근입된 모형말뚝을 대상으로 다양한 입력 가속도 크기 및 진동수 조건에서 1g 진동대 실험을 수행하였다. 실험 결과를 이용하여, 각각의 동적 p-y 곡선을 산정하였으며, 이 p-y 곡선 상에서 최대지반반력이 나타나는 꼭지점들을 연결하여 연약 점성토의 동적 p-y 중추곡선(Backbone curve)을 쌍곡선 함수로 나타내었다. 이 쌍곡선 함수를 정의하는데 필요한 초기 기울기와 극한 저항력은 Matlock의 p-y 곡선 공식을 이용하여 제안하였다. 새로 제안한 동적 p-y 중추곡선은 실제 내진설계에 사용되고 있는 정적 p-y 곡선과 다른 연구자들의 원심모형실험 결과 및 수치해석 결과와 비교하여 검증하였다.

노치부의 피로균열발생 수명 비교 (The comparison of the fatigue crack initiation life in a notch)

  • 김성훈;배성인;함경춘;송정일
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2001년도 춘계학술대회논문집A
    • /
    • pp.217-222
    • /
    • 2001
  • For the life evaluating of notched members, it is the best way that performing the real fatigue test of structure containing notch. But this method required generally much times and costs to evaluate fatigue life. So, generally we use the modified S-N curve or several methods to predict fatigue life. In this study, crack initiation life was evaluated by fatigue testing the SAE keyhole specimen and smooth specimen made of Al 7075-T6 alloys using the constant load then obtained S-N curve of smooth specimen and P-N curve of SAE keyhole specimen. And, fatigue lives of keyhole specimen are predicted using some life prediction methods (Nominal range I method, Nominal range II method, FEM analysis) for investigating experimented results, and that were compared with experimental data. Predicted fatigue lives by FEM analysis were corresponded with experimental data between 1/3times and 3times on the whole, and predicted fatigue lives using modified S-N curve (Nominal range I method, Nominal range II method) were nonconservative compared with that of FEM analysis.

  • PDF

특징점들의 적응적 선택에 근거한 B-spline 곡선근사 (B-spline Curve Approximation Based on Adaptive Selection of Dominant Points)

  • 이주행;박형준
    • 한국CDE학회논문집
    • /
    • 제11권1호
    • /
    • pp.1-10
    • /
    • 2006
  • This paper addresses B-spline curve approximation of a set of ordered points to a specified toterance. The important issue in this problem is to reduce the number of control points while keeping the desired accuracy in the resulting B-spline curve. In this paper we propose a new method for error-bounded B-spline curve approximation based on adaptive selection of dominant points. The method first selects from the given points initial dominant points that govern the overall shape of the point set. It then computes a knot vector using the dominant points and performs B-spline curve fitting to all the given points. If the fitted B-spline curve cannot approximate the points within the tolerance, the method selects more points as dominant points and repeats the curve fitting process. The knots are determined in each step by averaging the parameters of the dominant points. The resulting curve is a piecewise B-spline curve of order (degree+1) p with $C^{(p-2)}$ continuity at each knot. The shape index of a point set is introduced to facilitate the dominant point selection during the iterative curve fitting process. Compared with previous methods for error-bounded B-spline curve approximation, the proposed method requires much less control points to approximate the given point set with the desired shape fidelity. Some experimental results demonstrate its usefulness and quality.

Wedge Failure Mode 형태의 반력을 이용한 수평재하 말뚝의 거동 분석 (Analysis of Laterally Loaded Piles Using Soil Resistance of Wedge Failure Mode)

  • 김영호;정상섬
    • 한국지반공학회논문집
    • /
    • 제25권6호
    • /
    • pp.59-72
    • /
    • 2009
  • 대구경 해상 말묵의 수평 하중전이 거동 및 변형 해석을 위해 p-y 하중전이 해석법이 널리 사용되고 있다. 그러나, 본 연구에서는, 기존의 p-y 해석법의 단점을 극복하여, 지반의 연속성을 고려한 수평방향 하중전이 해석을 고찰하였으며, 3D wedge failure mode의 이론적인 해법과 재하시험을 통해 말뚝의 실제 거동에 보다 부합되도록 연약지반의 p-y 곡선을 제안하였다. 제안된 하중전이함수법의 타당성을 검증하기 위하여 현장재하시험 사례와의 비교분석을 수행하였고, 그 결과 제안된 해석방법은 기존 p-y 곡선에 비해 대구경 해상말뚝의 거동 및 변형 특성을 적절히 예측함을 알 수 있었다.

응력확대계수와 J-적분 결정을 위한 코스틱스방법의 실험조건에 관한 연구 (Revisit on Experimental Conditions in Determination of Stress Intensity Factor and the J-Integral Using the Methods of Caustics)

  • 이억섭;조종두;홍성경
    • 대한기계학회논문집
    • /
    • 제18권9호
    • /
    • pp.2331-2338
    • /
    • 1994
  • Experimental conditions of the optical shadow methods of caustics for measurement of the stress intensity factor and the J-integral in various materials(polycarbonate, PMMA, Al 5586D) are investigated. The necessary experimental requirements toe determine accurate values of the stress intensity factors and the J-integrals are described. The ratio of $r_o$ (radius of initial curve) to $r_p$ (plastic zone size) is selected as a parameter to verify the experimental limitation of the method of caustics in determination of fracture parameters. In this study, transmission caustics method was used for compact tension specimens made of polycarbonate and PMMA. while reflection caustics method was applied to c-shaped tension specimen made of Al 5586D. The appropriate ranges of $r_o/r_p$ tp determine accurate values of stress intensity factors were found to be 1.5~1.8. Existing experimental results have been obtained mainly by changing $r_p$ with different loads in $r_o/r_p$. However, in this study we could obtain varying $K_{caus}/K_{th}$ over the wide range of $r_o/r_p$ at fixed load conditions with newly designed optical arrangement. Thus, we could find the range in which theoretical and experimental results agree well each other by changing $r_o$ values only. In Al 5586D specimen, experimental caustics were located inside of the plastic zone, and $K_{caus}/K_{th}$ were found to be not unity in this range. It is found that $J_{caus}/J_{th}=1{\;}with{\;}r_o/t{\geq}0.8$ and the experimental plastic zone includes the contours of caustics.

원심모형 실험을 이용한 반복하중을 받는 모노파일 거동 평가 (Evaluation of Lateral Pile Behavior under Cyclic Loading by Centrifuge Tests)

  • 이명재;유민택;박정준;민경찬
    • 한국지반공학회논문집
    • /
    • 제35권6호
    • /
    • pp.39-48
    • /
    • 2019
  • 본 연구는 원심모형실험을 이용해 건조 사질토 지반에 근입된 모노파일의 수평 반복하중에 대한 거동을 연구하였다. 실험에 사용된 지반 시료는 상대밀도 80%에서 마찰각이 $38^{\circ}$인 건조 주문진 표준사를 사용했다. 실험 과정은 우선 반복하중의 크기를 결정하기 위해 정적 하중 실험을 수행하여 극한하중을 결정하였다. 이를 통해 도출된 극한 하중 값의 30%, 50%, 80%, 120%을 반복하중의 값으로 결정하였고, 반복횟수는 100회로 수행되었다. 이 결과를 통해 실험 반복하중 p-y 곡선을 산정하였고 도출된 하중 별 최대 지반반력점들을 이용하여 깊이 별 반복하중 p-y 중추곡선을 도출하였다. 이를 기존 p-y 곡선과 비교 결과, 동일 깊이에서 초기기울기가 API(1987) p-y 곡선보다 과소평가 되었으며, 극한지반반력은 과대평가되었다. 또한, 동적 p-y 곡선과 비교하였을 때, 동일 깊이에서의 반복하중 p-y 중추곡선의 초기기울기와 지반반력이 작게 평가되었다. 이는 말뚝이 받는 하중 조건에 따라 p-y 곡선을 다르게 적용해야 할 것으로 판단된다.

두경부 감염 환자에서 혈청 내 C-Reactive Protein의 변화 (THE CHANGES OF SERUM C-REACTIVE PROTEIN IN THE HEAD AND NECK INFECTION)

  • 이주현;김진수;이상한;김철환
    • Journal of the Korean Association of Oral and Maxillofacial Surgeons
    • /
    • 제29권1호
    • /
    • pp.5-13
    • /
    • 2003
  • 본 연구의 목적은 두경부 감염 환자에서 적혈구침강속도(ESR), 백혈구와 비교해 혈장 내 C-Reactive Protein(CRP)이 가지는 진단과 경과관찰에서의 기여도를 아는 데 있다. 본 연구를 위해 31명의 감염환자를 실험군으로, 32명의 악교정 수술 환자를 대조군으로 설정하여 다음과 같은 결과를 얻었다. 1. 실험군에서의 C-Reactive Protein(CRP)은 대조군의 CRP에 비해 더 높은 수치를 나타내며 감염이 지속되었던 증례를 제외하고는 지속적으로 감소하는 경향을 나타내었다(P<0.001). 2. ESR은 실험군과 대조군에서 모두 일정한 경향이 없었다. 3. 각 변수간의 상관관계는 CRP와 백혈구가 상관계수 0.664로 가장 높은 양의 상관관계를 나타내었다(r=0.664, P<0.01). 4. 설정된 ROC curve에서 분류기준값(cut-off value)의 변화에 따라 CRP 곡선의 증가가 빠르게 나타나고 측정된 곡선의 아래 면적(AUC: Area Under the Curve)이 0.744로 높은 값을 나타내어 예측의 정확도가 높다고 판단된다. 5. 실험군에서 회복일(recovery day)에 각 변수의 민감도는 CRP가 83%, ESR이 17%, 백혈구가 71%로 나타났다. 이상의 연구로 미루어 볼 때, 두경부 영역에서 CRP는 감염을 진단하고 경과관찰을 하는데 있어 ESR이나 Leukocyte에 비해 더 민감하게 환자를 감시(monitoring)할 수 있는 유용한 검사라고 사료된다.

LiYSiO4: La 열형광체의 온도에 따른 열발광 특성 (Thermoluminescent Properties by the Cooling Temperature and Grain Size in the LiYSiO4 : La Phosphors)

  • 김영국
    • 한국재료학회지
    • /
    • 제19권9호
    • /
    • pp.494-498
    • /
    • 2009
  • The thermoluminescent phosphors of LiYSi$O_4$ containing rare earth metal(La) dopants of 1 wt.%5 wt.% were prepared, and their TL characteristics have been investigated as a function of parameters such as the doping level and the heating rate. The grain size and cooling temperature of the highly sensitive LiYSi$O_4$: La phosphors have been investigated. The glow curve of LiYSi$O_4$: La has two peaks ($P_1,\;P_2$), and the peak height ratio of the two peaks is called $P_2/P_1$; here, the main peak is $P_2$. Experimental results indicate that the peak height ratios of the glow curve for LiYSi$O_4$: La are clearly correlated with the grain size and cooling temperature. The maximum $P_2/P_1$ ratio 3.25, the maximum sensitivity was observed for a grain size between 100-150 ${\mu}m$. The intensity of the TL peak of the phosphors was linearly proportion to the dose of X-rays.