• Proceedings of the KIPE Conference
• /
• 2003.07a
• /
• pp.85-88
• /
• 2003

In this Paper, we report the experimental results of the Forward-flyback U-U converter with current doubler and synchronous rectifier. The experimental converter, that has a output voltage 3.3V, output current 20A, maximum power of 66W, switching frequency of 290kHz and input voltage range of 36-75V, has been successfully implemented. As a result, in the entire voltage range the measured full load efficiency was above 85$\%$, and the output voltage was regulated at 3.3V within $\pm3{\%}$ tolerance.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1994.10a
• /
• pp.441-446
• /
• 1994

In this study proposed to rapid and simple test method for early decision of quality of concrete. As the this paper is experimental study for compressive strength of mortar using resistance method, the obtained results are summarized as follow ; $\circled1$ The resistance ratio was decreased as the incement of water-cement ratio $\circled2$ The compressive strength presented to the tendency of increment as resistance ratio is increaing

• Proceedings of the KAIS Fall Conference
• /
• 2002.11a
• /
• pp.178-180
• /
• 2002

In this Paper, we conducted a experimental study to measure a particle size distribution and mass spectrum with the special instrument such as ISPM and Q-MS. Also, we set up a total measuring system for monitoring the particle in the process chamber.

• Journal of the Korean Society of Safety
• /
• v.30 no.4
• /
• pp.39-45
• /
• 2015

This paper deals with development of integrity evaluation instrument for the power line surge protective device. A reliable power supply is an essential element in the developed information and communication society by highly advances in IT technology. However, the lightning incidence also increased with the recent extreme weather events. In Korea, in order to protect the electrical system from lightning surge, SPD(Surge Protective Device) has been used for these past 30 years. However, the method of diagnosing the safety of the SPD in the industry is insufficient. In this paper, SPD integrity evaluation system was composed of a variable DC power source unit, voltage-current sensor and the embedded controller. In order to measure V-I characteristics of MOV, 3 type samples were degraded by impulse current generator. After impulse tests, the varistor voltage of all samples and nonlinearity coefficient were decreased. It confirmed the utility of the developed equipment by this experimental test and the reliability of SPD is expected for surge accident prevention when applied to industrial plant.

• The Journal of Korean Institute for Practical Engineering Education
• /
• v.4 no.2
• /
• pp.158-161
• /
• 2012

Wee developed the automatic operation system for the laboratories equipment based on MATLAB GUI. By using Instrument Control Tool Box and standard protcol, PC and equipments are well connected each other. Wee developed the software to control the display of input and output between PC and equipments by using MATLAB GUI, This system will be effectively used in laboratories and experimental facilities and more in on-line education system for experiments.

• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.8
• /
• pp.615-618
• /
• 2016

This paper proposes a method to estimate vertical interaction force to the end of the surgical instrument by measuring reaction force at the part supporting the trocar. Relation between the force to the trocar and the interaction force is derived using the beam theory. The vertical interaction force is modeled as a function of the reaction force to the trocar and the distance between the drape plate and the trocar. Experimental results show that error is induced by the asymmetric shape of the trocar tip because contact position between the instrument and the trocar tip is changed depending on the direction of the interaction force. The theoretical relation, therefore, is compensated and reduced. Average $L_2$ relative error of the estimated force in the x-direction and the y-direction is 5.81 % and 5.99 %, respectively.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.17 no.1
• /
• pp.49-55
• /
• 2021

In this paper, an application example for fitness-for-service of material is shown. A kind of instrument valve is made of austenitic stainless steel fabricated by the cold working process. The tensile strength of the cold worked austenitic stainless steel has to be limited under 90 ksi to prevent the stress corrosion cracking in power plants. In industrial fields, tensile strengths of some materials were discovered to be over the regulation requirements in a certified material test report (CMTR). Owner's verification tests were performed to compare with that in a CMTR and to check the appropriateness. It is found that, in the case of verification test under the required test speed, valve materials could be used in the field. Although it is only one application sample of material check process in the power generation site, this case study could show an importance of basic experimental technology in academia and research circles.

• The Journal of Korean Academic Society of Nursing Education
• /
• v.17 no.3
• /
• pp.433-443
• /
• 2011

Purpose: This study aimed at (a) developing an instructional model of creative thinking education on the problem-based learning method (C-PBL) in undergraduate nursing curriculum at one University, and (b) examining its effect on nursing students' level of creativity and outcomes from problem-based learning. Methods: The C-PBL model was implemented on 43 juniors of the experimental group with a 30 hour-nursing class during one semester. The control group, with 54 seniors, received 4 hours of problem based learning training in an adult nursing class. Pre-and post-tests were done with the Torrance Tests of Creative Thinking for creative thinking ability, the Integrated Creativity Instrument for creative motivation and attitudes, the Problem Solving Competency questionnaire, and the Self-Directed Learning Instrument. Results: The C-PBL model was developed using a caring situation scenario to solve nursing problems with 3 training steps of 'encountering a patient in a caring situation', 'exploring nursing knowledge', and 'designing creative caring beyond given knowledge'. Between the experimental group and the control group, there were significant differences in creativity (p<.010), problem-solving ability (p<.010), and self-directed ability (p<.010). Conclusion: This C-PBL method could contribute in increasing creative competency as well as problem-solving ability for nursing students.

• The Journal of the Acoustical Society of Korea
• /
• v.16 no.2E
• /
• pp.3-13
• /
• 1997

The Jing is a traditional Korean percussion instrument which plays a major role in Korean folk music. The distingishing feature of this instrument is its unique, long lasting low tone timbre. In this paper, we investigated the vibro-acoustic characteristics of the Jing. Our attention was focused mainly on findings out the physical variables that determine its unique sound. By understanding the way in which the Jing is manufactured, we were able to realize that the unique manufacturing and especially the tuning process by expert craftsman is responsible for the peculiar timbre the Jing produces. The experimental methods implemented to analyzer the Jing were planar acoustic holography and direct measurements by accelerometers. The results from the holographic method and the direct measurements were in good agreement. It turned out that unlike most percussion instruments which have inharmonic partials, the Jing has harmonic partials which are responsible for its unique low-tone timbre. From the holographic representations of the modes, it is clear that the antinodes are located in the center of the Jing which is coincident with the typical striking location. In addition, intensity maps were constructed so that the specific acoustic energy flow can be visualized. It was also interesting to see the the circulation of energy intensity which corresponds to the rotating mode of the Jing.

• The Journal of Korean Physical Therapy
• /
• v.29 no.6
• /
• pp.307-315
• /
• 2017

Purpose: The purpose of this study was to investigate the effects of kinesio taping on lumbar flexibility onto erector spinae and sacroiliac joint. Methods: Sixty healthy adults (male=36, female=24) participated in this study and were randomly assigned to the experimental group that received kinesio taping onto erector spinae and sacroiliac joint (n=30) or the control group that received X-letter placebo taping onto them (n=30). Lumbar flexibility (flexion, extension, lateral flexion, and rotation) was measured using back range-of-motion instrument (BROM) II before and after taping. Results: In the change of lumbar flexibility after taping in the experimental group, there were statistically significant difference in flexion, lateral flexion, and rotation (p<0.05), but there was no significant difference in extension. There was no significant difference in the change of lumbar flexibility after taping in the control group. Conclusion: In conclusion, kinesio taping onto erector spinae and sacroiliac joint improved the joint function. Kinesio taping may reduce the muscle tension and facilitate the circulation of tissue fluid. In light of these results, it is thought that the application of kinesio taping had influence on an increase in lumbar flexibility. Therefore, kinesio taping will be able to be used as the method of the prevention of pain and the treatment in the lumbar region.