• Restorative Dentistry and Endodontics
• /
• 제46권4호
• /
• pp.47.1-47.9
• /
• 2021

Objectives: This study aimed to use a laboratory model to evaluate the efficacy of an experimental bleaching agent. Materials and Methods: The model used human extracted molars that were treated and measured for bleaching efficacy. Teeth (n = 50) were distributed into 5 groups: Negative control (NC): immersion in water for 8 hours; Nanofibers (NFs): Experimental titanium dioxide nanofibers with stirring and light activation for 8 hours; Whitestrips (WS): Crest 3D White Glamorous White Whitestrips, 2 applications daily for 30 minutes, 14 days; 1% hydrogen peroxide (HP) standard: 1% hydrogen peroxide for 8 hours; and 30% HP standard: 30% hydrogen peroxide for 8 hours. Instrumental measurements were performed using a spectrophotometer. Results were recorded at baseline, 1-day post-bleaching, and 1-week post-bleaching. Kruskal-Wallis procedure was used to determine differences in color change. Pearson correlation was used to evaluate the relationship between visual and instrumental measurements. Tests of hypotheses were 2-sided with alpha = 0.05. Results: There was no significant difference in color parameters (L1, a1, b1, and shade guide units [SGU]) at baseline (p > 0.05). There was a significant difference among the groups for overall color change (ΔE^*ab) and change in shade guide units (ΔSGU) at 1-day and 1-week post-bleaching (p < 0.05). The higher the HP concentration, the higher the color change as expressed in ΔSGU and ΔE^*ab. The negative control exceeded the perceptibility threshold of ΔE^* = 1.2 regardless of time point. NFs showed a decrease in chroma, but were not statistically different compared to the negative control. Conclusions: The laboratory model was successful in screening an experimental bleaching agent.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.675-680
• /
• 2002

Cracking and bulging in welded and internally lined pressure vessels that work in thermal-mechanical cycling service have been well known problems in the petrochemical, power and nuclear industries. However, published literature and industry surveys show that similar problems have been occurring during the last 50 years. A better understanding of the causes of cracking and bulging causes is needed to improve the reliability of these pressure vessels. This study attempts to add information required for increasing the knowledge and fundamental understanding required. Typical examples of this problem are the coke drums in the delayed coking units refinery process. This case was selected for experimental work, field study and results comparison. Delayed coking units are among the refinery units that have higher economical yields. To shut down these units represents a high negative economical impact in refinery operations. Also, the maintenance costs associated with repairs are commonly very high. Cracking and bulging occurrences in the coke drums, most often at the weld areas, characterize the history of the operation of delayed coking units. To design and operate more robust coke drums with fewer problems, an improved metallurgical understanding of the cracking and bulging mechanisms is required. A methodology that is based field experience revision and metallurgical analyses for the screening of the most important variables, and subsequent finite element analyses to verify hypotheses and to rank the variables according to their impact on the coke drum lives has been developed. This indicated approach provides useful information for increasing coke drum reliability. The results of this work not only order the most important variables according to their impact in the life of the vessels, but also permit estimation of the life spans of coke drums. In conclusion, the current work shows that coke drums may fail as a combination of thermal fatigue and other degradation mechanisms such as: corrosion at high and low temperatures, detrimental metallurgical transformations and plastic deformation. It was also found that FEA is a very valuable tool for understanding cracking and bulging mechanisms in these services and for ranking the design, fabrication, operation and maintenance variables that affect coke drum reliability.

• 대한토목학회논문집
• /
• 제33권3호
• /
• pp.1007-1015
• /
• 2013

하중 발생과정에 따른 누적피해의 선형뿐만 아니라 비선형 거동을 해석할 수 있는 추계학적 확률모형이 수립되었다. 여러 종류의 피해강도함수를 도입하여 내용년수의 파괴확률과 비선형 누적피해의 거동이 자세히 해석되었다. 특히 본 연구에서는 저항한계를 임의의 분포함수를 갖는 확률변수로 취급하여 한계상태의 불확실성을 고려하였다. 또한 피복재에 대한 피해수준을 이용하여 처음으로 추계학적 확률모형을 경사제에 적용하였다. 실험 자료와의 비교를 통해 추정된 경사제 피복재에 대해 피해강도함수를 이용하여 내용년수에 따른 파괴확률과 비선형 누적피해의 거동을 해석하였다. 마지막으로 해석 결과를 이용하여 경사제 피복재의 보수 보강 시점과 최소한의 보수 보강규모를 정량적으로 산정할 수 있는 예방적 유지관리 방법을 제시하였다.

• Restorative Dentistry and Endodontics
• /
• 제21권2호
• /
• pp.505-516
• /
• 1996

The effects of application of dentin desensitizer containing glutaraldehyde (Gluma Desensitizer) and dentin adhesive system (All Bond 2) to the exposed dentin on the intradental nerve activity (INA) and the occluding aspects of dentinal tubules were investigated in cat canine teeth. Single pulp nerve units were dissected from the inferior alveolar nerve and indentified as $A{\delta}$-fiber units. The INAs elicited by 4M NaCl before and after the application of each experimental agent were compared. The morphological changes of exposed dentin surfaces and dentinal tubules in the dentin specimens used to record INAs were observed by SEM. The results obtained were as follows. 1. Eight $A{\delta}$-fiber units (conduction velocity: $8.0{\pm}4.0m$/sec) were identified. 4M NaCl evoked an irregular burst of action potentials which ceased immediately after washing. 2. In 4 $A{\delta}$-fiber units, the change of INA after the application of Gluma Desensitizer was $133.9{\pm}80.7%$ when it was compared with the INA before the application of the same agent. 3. In 4 $A{\delta}$-fiber units, application of All Bond 2 completely abolished the INA induced by 4M NaCl. 4. In specimens applied with Gluma Desensitizer, the formation of hybrid layer as well as the identification of resin penetration and reaction products with proteins in dentinal tubules were not clearly observed in interface between dentin and adhesive resin. In specimens applied with All Bond 2, the gap width of 2-$3{\mu}m$ was formed between exposed dentin and adhesive resin, and the hybrid layer and resin tags were not clearly formed either.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2011년도 춘계학술대회
• /
• pp.95-99
• /
• 2011

The research analyzes structure models of Repeated Measurement Design (RMD) and Hierarchical Design (HD). The experimental unit of RMD model is living organisms, such as human. In contrast, HD is used when all the factors are random. The HD models are derived from R:B:A, R:C:B:A and R:C:($A{\times}B$).

• Restorative Dentistry and Endodontics
• /
• 제21권2호
• /
• pp.652-663
• /
• 1996

The purpose of this study was to evaluate the tensile bond strength to tooth structure of composite resin and glass ionomer cement according to filling methods and light curing units. In this study, two class V cavities were prepared on the buccal surface of each tooth of 140 extracted human molars, and they were randomly assigned into 3 experimental groups with 40 teeth and control group with 20 teeth. And then, each experimental groups subdivided into 2 groups(A,B) according to light curing units. The cavities of each group were filled with the CLEARFIL FII self curing resin(Control Group), Z-100 light curing resin(Group 1), Vitremer$^{TM}$ light curing glass ionomer cement(Group 2) and Z-100 light curing resin over the Vitrebond$^{TM}$ liner(Group 3). And subdivided A Group used Argon Laser(SPECTRUM$^{TM}$, U.S.A.), B Group used XL 1,000 curing light (3M, U.S.A.). The specimens underwent temperature changed from $5^{\circ}C$ to $55^{\circ}C$ five hundred times. After thermocycling, specimens were stored in 100% relative humidity at $37^{\circ}C$ for 24 hours. And then, the tensile bond strength of specimens were calculated with Universal Testing Machine(AGS-100A, Japan). The results were as follows : 1. Among the experimental groups, the group 2-B showed the highest tensile bond strength ($18.89{\pm}7.80$) and the group 1-A showed the lowest tensile bond strength ($11.68{\pm}2.28$). There was significant difference between group 2-B and group 1-A(p<0.01). 2. Between the light curing units, the XL 1,000 unit showed higher tensile bond strength ($16.63{\pm}3.20$) than that of the Argon Laser unit ($13.73{\pm}2.30$). There was significant difference between XL 1,000 and Argon Laser(p<0.01). 3. About filling methods and materials, the group 2 showed the highest tensile bond strength ($17.56{\pm}1.89$) and the group 1 showed the lowest tensile bond strength($13.03{\pm}1.90$). There was significant difference between group 2 and group 1,3(p<0.01). In conclusion, the results showed that the glass-ionomer cement that cured by XL 1,000 light curing unit demonstrated significantly higher tensile bond strength than other curing unit and filling methods.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2006년도 동계학술발표대회 논문집
• /
• pp.32-32
• /
• 2006

• International Journal of Precision Engineering and Manufacturing
• /
• 제6권1호
• /
• pp.51-58
• /
• 2005

The development of the high-efficiency machine-tools equipment and new cutting tool materials with high hardness, heat- and wear-resistance has opened the way to application of high-speed cutting process. The basic argument of using of high-speed cutting processes is the reduction of time and the respective increase of machining productivity. In this sense, the spindle units may be regarded as one of the most important units, directly affecting many parameters of high-speed machining efficiency. One of the possible types of spindle units for high-speed cutting is the air-bearing type. In this paper, we propose the mathematical model of the dynamic behavior of the air-bearing spindle. To provide the high-level of speed capacity and spindle rotation accuracy we need the adequate model of "spindle-bearings" system. This model should consider characteristics of the interactions between system components and environment. To find the working characteristics of spindle unit we should derive the equations of spindle axis movement under the affecting factors, and solve these equations together with equations which describe the behavior of lubricant layer in bearing (bearing stiffness equations). In this paper, the three influence coefficients are introduced, which describe the center of spindle mass displacement, angle of shaft rotation around the axes under the unit force application and that under the unit torque application. These coefficients are operated in the system of differential equations, which describes the spindle axis spatial movement. This system is solved by Runge-Kutta method. Obtained trajectories and amplitude-frequency characteristics were then compared to experimental ones. The analysis shows good agreement between theoretical and experimental results, which confirms that the proposed model of air-bearing spindle is correctis correct

• Journal of Korean Biological Nursing Science
• /
• 제15권4호
• /
• pp.247-256
• /
• 2013

Purpose: This study aimed to determine the effects of listening to music on pain and vital signs of critically ill patients with ventilatory support in intensive care units during nursing treatment (changes of posture and tracheal suction). Methods: The experimental treatment was to use an mp3 player and a speaker to let them listen to classical music by Mozart during nursing treatment. To determine the effects of music intervention, pain (Critical-Care Pain Observation Tool-K) was used. The data analysis was carried out by using PASW Statistics 20.0. Results: Hypothesis "The scores for pain would differ between the experimental group provided with music intervention during nursing treatment, and the control group" was supported. Conclusion: Application of music intervention during nursing treatment for critically ill patients with ventilatory support in intensive care units was found to be effective in reducing pain. Therefore, music intervention during nursing treatment for critically ill patients with ventilatory support can be used as non-pharmaceutical nursing intervention to reduce pain for the patients.

• 한국초등과학교육학회지:초등과학교육
• /
• 제33권1호
• /
• pp.30-43
• /
• 2014

'Basic Inquiry' unit was newly included in the grade 3~4 science textbook developed for 2009 revised national curriculum. The unit deals with six basic inquiry skills such as 'observation', 'measurement', 'classification', 'prediction', 'inference', and 'communication'. This study investigated elementary school teachers' perceptions on the effects of 'Basic Inquiry' unit by questionnaires (N=104 for pre-survey, N=90 for post-survey). The results showed that how the teachers have taught basic inquiry skills before this new textbook and how they perceived the educational effects of the unit after experimental teaching period in three aspects; development of basic inquiry skills, facilitating science learning in other units, and implementation of open inquiry. The reasons of positive perceptions as well as negative perceptions were analyzed and discussed with the suggestions for further study.