• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.04a
• /
• pp.184-185
• /
• 2022

This study researched the effect of graphene nanoribbons (0.05 wt%) on cement-based materials' mechanical and electrical properties. The results were compared with the ordinary Portland cement (OPC) paste and OPC paste with the same content of carbon nanotubes. The experiment results showed that after curing for 28 days, the compressive and splitting tensile strength of the sample with graphene nanoribbons were increased by 17.8% and 6.6% compared to OPC paste, and its reinforced effect for cement-based materials was superior to carbon nanotubes. Besides, due to the excellent electrical properties of graphene nanoribbons, the sample reinforced by graphene nanoribbons had a lower electrical resistivity (135.5 Ω·m) than OPC paste (418.5 Ω·m) and paste with carbon nanotubes (175.5 Ω·m). This proved the promising application of graphene nanoribbons on cement-based materials.

• Korean Journal of Clinical Laboratory Science
• /
• v.38 no.3
• /
• pp.184-188
• /
• 2006

The purpose of the recovery experiment in clinical chemistry is performed to estimate proportional systematic error. We must know all measurements have some error margin in measuring analytical performance. Proportional systematic error is the type of error whose magnitude increases as the concentration of analyte increases. This error is often caused by a substance in the sample matrix that reacts with the sought for analyte and therefore competes with the analytical reagent. Recovery experiments, therefore, are used rather selectively and do not have a high priority when another analytical method is available for comparison purposes. They may still be useful to help understand the nature of any bias revealed in the comparison of kit experiments. Recovery should be expressed as a percentage because the experimental objective is to estimate proportional systematic error, which is a percentage type of error. Good recovery is 100.0%. The difference between 100 and the observed recovery(in percent) is the proportional systematic error. We calculated the amount of analyte added by multiplying the concentration of the analyte added solution by the dilution factor(mL standard)/(mL standard + mL specimen) and took the difference between the sample with addition and the sample with dilution. When making judgments on method performance, the observed that the errors should be compared to the defined allowable error. The average recovery needs to be converted to proportional error(100%/Recovery) and then compared to an analytical quality requirement expressed in percent. The results of recovery experiments were total protein(101.4%), albumin(97.4%), total bilirubin(104%), alkaline phosphatase(89.1%), aspartate aminotransferase(102.8), alanine aminotransferase(103.2), gamma glutamyl transpeptidase(97.6%), creatine kinase(105.4%), lactate dehydrogenase(95.9%), creatinine(103.1%), blood urea nitrogen(102.9%), uric acid(106.4%), total cholesterol(108.5), triglycerides(89.6%), glucose(93%), amylase(109.8), calcium(102.8), inorganic phosphorus(106.3%). We then compared the observed error to the amount of error allowable for the test. There were no items beyond the CLIA criterion for acceptable performance.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.41 no.spc1
• /
• pp.94-109
• /
• 1996

Antioxidants of sesame have been reported to cure and prevent various diseases by means of diverse physiological activities, prevention of acidification in organisms, prevention of acidification and decay of lipids, cholesterol depression, preventive effects on chemical breast cancer, skin beauty and senescence inhibition, and so on. Recognizing their significance to health and disease prevention, researchers in Japan and America have given so much importance to study antioxidants in the last decade. In addition, they are actively pursuing studies on production, processing for food use and development of new varieties that have high antioxidant content. Recently, researchers in Korea have shown the same interest and have conducted similar studies, however, the importance of the following basic issues must be recognized to guide in future activites : First, improvement of sesame quality must be done to raise the contents of not only the fat and fatty acid but also sesamin, sesamolin and sesaminol glucoside. For the use of these components it is necessary to study the gentic pattern and individual selections developed from minimum sample size and fast lipid analysis techniques. Second, sesaminol of sesame has a remarkable function in preventing acidification and so sesame can be utilized as a food that prevents or delays aging caused by automatic acidification of fat. Therefore, for maximum medicinal benefit from sesame oil there is a need to develop food materials having new medicinal functions. Third, the sesamin and sesamolin content of sesame germplasms collected in Korea showed lower ranges of $0.04\~0.68$ percent and $0.08\~0.68$ percent respectively, while Japanese germ-plasm showed 1.9 percent maximum content of seasmin. Thus, germplasm collection and analysis of worldwide genetic resources are urgently needed.

• Journal of Biosystems Engineering
• /
• v.37 no.3
• /
• pp.166-176
• /
• 2012

Purpose: This study was conducted to investigate the potential of interactance mode of NIR spectroscopy technology for the estimation of soluble solids content (SSC) and firmness of muskmelons. Methods: Melon samples were taken from local greenhouses in three different harvesting seasons (experiments 1, 2, and 3). The fruit attributes were measured at the 6 points on an equator of each sample where the spectral data were collected. The prediction models were developed using the original spectral data and the spectral data sets preprocessed by 20 methods. The performance of the models was compared. Results: In the prediction of SSC, the highest coefficient of determination ($R_{cv}{^2}$) values of the cross-validation was 0.755 (standard error of prediction, SEP=$0.89^{\circ}Brix$) with the preprocessing of normalization with range in experiment 1. The highest coefficient of determination in the robustness tests, $R_{rt}{^2}$=0.650 (SEP=$1.03^{\circ}Brix$), was found when the best model of experiment 3 was evaluated with the data set of experiment 2. The best $R_{cv}{^2}$ for the prediction of firmness was 0.715 (SEP=3.63 N) when no preprocessing was applied in experiment 1. The highest $R_{rt}{^2}$ was 0.404 (SEP=5.30 N) when the best model of experiment 3 was applied to the data set of experiment 1. Conclusions: From the test results, it can be concluded that the interactance mode of VIS/NIR spectroscopy technology has a great potential to measure SSC and firmness of thick-skinned muskmelons.

• The Journal of Korean Medicine
• /
• v.27 no.1 s.65
• /
• pp.57-77
• /
• 2006

Objectives : The purpose of this study is to review research papers published by Korean research groups on biophoton of human beings based on experiment subject and methodology. Methods : In order to review human biophoton research executed in Korea, all the papers published in Korean and international journals by Korean research groups were selected. Several key foreign papers were also reviewed for clarification of this study. Based on experiment subjects, experiment methodology, and interpretation of experiment results were analyzed. On each experiment, its original interpretation was directly quoted. Issues on the experiment methodology and interpretation were expressed at the end of each subject. Results and Conclusions : We found that experiments on human biophoton were compelling. However it seemed that more experiments, especially on their sample sizes, are needed to demonstrate its clinical application. Interpretations based on Korean traditional medicine also need to be elaborated more. In order to do accomplish clinical application of biophoton, interdisciplinary works are required. Some suggestions on biophoton experiments were made.

• Journal of Oral Medicine and Pain
• /
• v.35 no.1
• /
• pp.75-81
• /
• 2010

By repeating nocturnal bruxism occlusal appliance's wearing condition that is used to cure temporomandibular disorders into the vitro experiment, research aims to find out how moisture infiltrated and drying cycle process affects on the surface microhardness of the resin for occlusal appliance and flexural strength. By utilizing resin for occlusal appliance which is the main component of poly methyl methacrylate, bar shaped sample was produced. For the resin sample utilized as the controlled group 1, the sample was infiltrated in the moisture for 7 days in the temperature of 37C. Then, the resin sample of the controlled group 2 was maintained in a dry condition for 7 days in the normal temperature. After that, each sample's surface microhardness and flexural strength were measured. For the resin sample that is utilized as the experimental sample, the sample was infiltrated in the moisture for 7 days in the temperature of 37C. Then, it was inundated for 8 hours a day and dried in the normal temperature for 16 hours with the continuous process of moisture infiltration and dry cycle process for 30 days. During this cycle process, sample's surface and flexural strength were measured in the 1st day, 7th day, and 30th day. Then, it was statistically analyzed to find out the difference of controlled and experiment group's surface microhardness and flexural strength. Results are 1. For the experimental and controlled group's surface microhardness of the resin for the occlusal appliance, it did not show any significant differences after moisture infiltration and dry cycle process repetition. 2. In case of the flexural strength for resin for the occlusal appliance, experimental group with moisture infiltration and dry cycle for 30 day process had greater effect than the experimental group at the 1st day and controlled group These results can be considered to be utilized from the patients of the temporomandibular disorders towards occlusal appliance used and maintained method.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.11a
• /
• pp.9-10
• /
• 2015

Waste Concrete Powder will be generated during the manufacture of construction waste as recycled aggregate Waste concrete. The main component of the waste concrete Powder is a silica-based composition 51% SiO₂, waste concrete cement-based composition Al₂O₃ 10%, CaO 26% component are contained. The material is silica sand of PHC piles should experiment by replacing the Waste Concrete Powder. The compressive strength results are as follows. 25% when the Silica was replaced 32.5Mpa, when 50% have replaced 43.4Mpa, when 75% have replaced 45.3Mpa was measured. Compared with the non-replaced test sample it appears that the strength increases. Therefore, it is determined that the practical use of the PHC piles by replacing silica via this experiment is possible.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.10 no.1
• /
• pp.107-116
• /
• 1981

This experiment was attempted to establish the optimal condition, e.g., the effects of pH, interferences of other elements, for the determination of the inorganic elements in the paddy soils by atomic absorption spectrophotometry. Inorganic elements of 100 paddy soils which were sampled in Jeon bug provincial farm land were determined by atomic absorption spectrophotometer in that condition. The results obtained in this experiment are summarized as follows: 1) The optimal pH for determination of inorganic elements in paddy soils is about 7.0. 2) It was investigated that the absorbance of potassium was increased, and that of calcium, magnesium and zinc was decreased by adding of $Fe^{++}$ and $Cu^{++}$ in the sample. 3) It was shown that paddy soils in Jeonbug provincial farm land contain the normal amounts of inorganic elements (K, Ca, Mg, Zn,). But comparing to the results of 1976 year, it was known that the contents of inorganic elements in paddy soils considerably was changed.

• Journal of Korean Society for Atmospheric Environment
• /
• v.12 no.5
• /
• pp.587-591
• /
• 1996

An intercomparison experiment was implemented to assess the uncertainties and precisions om atmospheric SO$_{2}$ measurement techiques including a pulsed fluorescence (P-F), a diffusion-scrubber /ion chromatography (D-I), and a mist-chamber/ion chromatography (M-I). Each of those three techniques was investigated by researchers at Seoul National University, Yonsei University, and Hankuk University of Foreign Studies, respectively. The concentrations of atmospheric SO$_{2}$ were determined concurrently using three independent measurement techniques at the Seoul National University campus, Korea during Nov.22 to Dec.2, 1995. While the results from the P-F and D-I techinques showed the very close agreements (within +-5%) throughout the experiment period, M-I technique showed systematically smaller values (up to 30%) than the other two techniques. Although sources of larger discrepancy between different techniques were mot identified, the lower SO$_{2}$ values of the M-I method may be related to the errors associated with sample collection effciency, mass flow rate measurements, and standardization of ion chromatography.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.3 no.3
• /
• pp.172-176
• /
• 1970

This research dealt with the nutrient value of the seaweed, Sargessum horneri (Turner) C. Ag. which showed the highest nutrient value in the previous exporiment (Park 1968). Its objective was to find the most effective mixing ratio of ordinary chicken feed used for pullet. In order to investigate the most effective mixing ratio, seven kinds of sample feed with vary-ing amounts of the seaweed as shown in table 2 were prepared and were fed to seven groups of chickens, each group consisting of twenty, four week old, pullets. In addition, the effect of sodium glutaminate mixed in the feed was also investigated, and the following result was obtained. The average increase in body weight of each group during the experiment period was determined. The group fed with the feed containing $10\%$ powdered Sargassum horneri (Turner) C. Ag. showed the highest body weight increase. In this experiment the body weight increase was accelerated by mixing $0.5\%$ sodium glutaminate In the above feed.