• Applied Chemistry for Engineering
• /
• v.16 no.2
• /
• pp.194-199
• /
• 2005

The principle of vortex cyclone was applied to enhance the treatment efficiency of waste air streams containing particulate matters, phenol, and others. Adsorption, condensation, and/or coagulation could be induced at low temperature zone formed by Joule-Thomson expansion as the pressurized air and pulverized activated carbon were introduced at the tangential direction into the cyclone system applied with the coaxial funnel tube of vortex cyclone. Easily condensible vapors were adsorbed and/or condensed forcibly on coagulated or condensed materials which were formed as cores for coagulation or condensation by themselves or on pulverized activated carbons. These types of coagulation or condensation rates were rapidly promoted by increase in their diameter. The maximum removal efficiency obtained from this experiment for the removal of carbon dioxide and phenol was about 87.3 and 93.8 percent, respectively. Phenol removal efficiency was increased with the relative humidities and enhanced by pulverized activated carbon added. The Joule-Thomson coefficients were increased with the pressure of air injected in the range of the relative humidities between 10% and 50%. It is believed that the moisture, particulate matters, and the pressure of the process air introduced could control the removal efficiency of VOCs.

• Journal of Distribution Science
• /
• v.13 no.1
• /
• pp.27-33
• /
• 2015

Purpose - The ICT market in the EU is lagging behind that of the US; however, algorithm and software development within the EU have grown steadily, and they involve focusing on the creative cultural convergence conceptualized as part of Horizon 2020 and connecting neighboring markets in the EE and the Mediterranean region. It is essential to study the requirements to market the EU's creative ICT development in emerging industrial countries after examining its applicability in these countries. Research design, data, and methodology - This study deals with data pertaining to the EU's creative industry and competitive edge. The global cultural expansion of the EU facilitates a new concept involving not only low-cost IT products to enhance local cultural artifacts through R&D and the construction of efficient infrastructure services, but also information exchange with a realistic commercialization of the technology that can be applied for creative cultural localization. In the European industry, research on algorithms has been applied for the benefit of consumers. We investigated how the process is conducted in the EU. Results - Europe needs to adjust its economic structure to the local culture as part of IT distribution convergence. The convergence has been converted into a production algorithm with IT in the form of low-cost production. This is because there is an attempt to improve the quality of transport infrastructure, workforce availability, and the distribution of the distance to the local industries and consumers, using IT algorithms. Integrated into the manufacturing industry, based on the ICT infrastructure and solutions, smart localized regional clusters are formed with the help of grafting. Europe has own strategy to increase the number of hub-and-spoke cities. Europe is now becoming integrated, with an EPC system for regional cooperation rather than national competition in ICT technology. Europe has also been recognized in this study as changing the step-by-step paradigm for global competitiveness through new creative culture industries. Conclusions - As a result, there are several ways of converging with others through EU R&D intensity; therefore, the EU can be seen as successfully increasing marginal value, which is useful in developing a special industrial cluster or local cultural cities that create converged development by connecting people and objects with IT. In fact, when compared to the US, Europe has a strong culture and the car industries have a tendency to overshadow the IT industries with integration of services in IT distribution. Considering the rapid environmental changes, the convergence of IT services is likely to take place in Europe, similar to the pharmaceutical industry and the automotive industry. This requires a focus on human resources and automated systems management. The trend is to move away from low-wage industries, switched to key personnel centers of the local university-industry. EU emphasizes the creation of IT market demand in Europe involving local cultural convergence for marketing as the second step to strengthen the economic hub-and-spoke areas.

• Journal of Welding and Joining
• /
• v.28 no.3
• /
• pp.92-98
• /
• 2010

Ferritic stainless steels, which have relatively small thermal expansion coefficient and excellent corrosion resistance, are increasingly being used in vehicle manufacturing, in order to increase the lifetime of exhaust manifold parts. But, there are limits on use because of the problem related to cosmetic resistance, corrosions of condensation and high temperature salt etc. So, Aluminum-coated stainless steel instead of ferritic stainless steel are utilized in these parts due to the improved properties. In this investigation, Al-8wt% Si alloy coated 409L ferritic stainless steel was used as the base metal during Gas Tungsten Arc(GTA) welding. The effects of coated layer on the microstructure and hardness were investigated. Full penetration was obtained, when the welding current was higher than 90A and the welding speed was lower than 0.52m/min. Grain size was the largest in fusion zone and decreased from near HAZ to base metal. As welding speed increased, grain size of fusion zone decreased, and there was no big change in HAZ. Hardness had a peak value in the fusion zone and decreased from the bond line to the base metal. The highest hardness in the fusion zone resulted from the fine re-precipitation of the coarse TiN and Ti(C, N) existed in the base metal during melting and solidification process and the presence of fine $Al_2O_3$ and $SiO_2$ formed by the migration of the elements, Al and Si, from the melted coating layer into the fusion zone.

• (The)Study of the Eastern Classic
• /
• no.71
• /
• pp.259-304
• /
• 2018

In this paper, we analyzed and analyzed the entry path and the capacity of translation competent personnel who participated in the translation project for the last 5 years. For this purpose, the entry path of the translation workforce is classified as 'employee', 'research course', 'vt', and 'external expert'. And the number of manpower and the amount of translated manuscripts were examined by year. In addition, the average amount of manpower for one translator was also examined. As a result of the research and analysis, the proportion of the total translation companies in the translation business was in the order of external experts - from the research course - from the qualification examination - from the staff. The proportion of manuscripts is in the order of from the research course - external expert - from the qualification examination - from the staff. In addition, we surveyed and analyzed the present status of each of the translators and discussed the characteristics and problems of each business sector. In the translation of historical documents, the proportion of manpower is the largest in the research process, but the proportion of manuscripts is the highest in the qualification test, and that of the experts in the translation and special classics is significant. In addition, it was judged that translation work of translator was proceeding inefficiently by analyzing average manpower quantity of translation worker. In order to solve these problems, three plans were proposed: 'Need to plan the use of translation personnel based on business plan', 'Improvement of qualification examination for cross-country and translation committee members', 'Training of translation experts in specialized fields and expansion of entry routes'. Each of these measures must be validated and validated through detailed analysis and research. However, it is hoped that the translator will help the translation project by establishing a more systematic and planned business plan and a plan to utilize the translation workforce.

• International Area Studies Review
• /
• v.20 no.2
• /
• pp.113-140
• /
• 2016

This paper first extracts the main basis for the Middle-Income Trap(MIT) to apply these grounds to reality of the Chinese economy. And then confirmed crisis factors of China economy. Also discussed then the economic reforms of China in order to not fall into the MIT. After reviewing previous research extracted six factors the results will correspond to comply with the Chinese economy. Those are 'Over-investment', 'excess capacity' 'reduction of TFP continued,' 'disappearance and the aging of the population bonus', 'excessive debt and structural adjustment and financial instability of the company', 'income unequal expansion', 'low financial and information infrastructure accessibility', and 'low transparency index'. China's policy direction to avoid the MIT generally set properly, but proof that implementation process not easy, was appearing everywhere. After all, China economy should be modified now to a reforms of 'government failure' and promotion of function for ongoing restructuring system in the market. Because of the SDR incorporation from 2015, it is inevitable to face major constraints in the external aspects.

• The Journal of the Korea Contents Association
• /
• v.19 no.10
• /
• pp.217-225
• /
• 2019

National research and development(R&D) information is information generated in the process of performing R&D based on programs and projects issued by national government departments, and includes information from various research fields as ordered by various departments. Therefore, for efficient R&D information retrieval, it is necessary to build a national R&D terminology dictionary that can reflect the characteristics of such national R&D information. In this study, we propose a method for constructing a national R&D terminology dictionary by applying the classification of science and technology standards used to specify the research field in national R&D information. We will discuss the structural characteristics of national R&D project information and the usefulness of the project keyword, and explain the status of national R&D information by the National Standard Science and Technology Classification(NSSTC) Codes and the characteristics of the national R&D terminologies. Based on this, a method for building a national R&D terminology dictionary is defined in terms of the type and structure of the terminology dictionary, preliminary construction procedures, and refining rules. The national R&D terminology dictionary built on the basis of this study can be used in various ways such as expansion of search terms using Korean-English equivalent words and synonyms when searching national R&D information, clarifying the scope of search using NSSTC, and providing user convenience functions using term explanation information.

• Korean Journal of Construction Engineering and Management
• /
• v.20 no.6
• /
• pp.107-116
• /
• 2019

Korean construction engineering firms want to pave the way for expansion of overseas markets through the World Bank's Official Development Assistance (ODA) projects as a way to improve their overseas project performance. However, since the World Bank project competes with global companies for limited projects, building partnerships with suitable business partners is essential to gain an upper hand in bidding competition and meet the institutional conditions of the recipient country. In this regard, many network studies have been conducted in the past through Social Network Analysis (SNA), but few have been analyzed based on the process of changes in the network. So, This study collected winning data from the three Southeast Asian countries that ended after the World Bank's ODA project performed smoothly, and established a learning-based link prediction model that reflected the dynamic nature of the network. As a result, the 11 main variables acting on building a cooperative relationship between winning companies were derived and the effect of each variables on the probability value of cooperation between individual links was identified.

• Journal of Korea Port Economic Association
• /
• v.23 no.2
• /
• pp.87-107
• /
• 2007

A rapid growth of interregional trade between China and Korea requires new development and expansion of ports. Currently, there is no rail-ferry system between China and Korea, however, a rapid growth of car-ferry industry shows possibilities. Several candidate cities and regions in East part of China and West part of Korea are selected. We identified times in clearance and station-to-station services as major benefits. We compared three transport modes including candidate cities and regions: container ships, car-ferry and rail-ferry. We used AHP (Analytic Hierarchy Process) as an evaluation method to select most competitive rail-ferry routes between two countries. We also used 7-point Likert scales to find out bottlenecks and factors to introduce rail-ferry services as other questionnaires. As a result, Rail Ferry System(RFS) is a little expensive due to wagon loading efficiency in cargo hold of the ship compared to Car Ferry System or Liner Shipping System. But RFS is recommendable in case of Block Train transport between Korea and EU area by may of TCR and TSR comparing Car Ferry System, because it can reduce total transport cost and connecting procedure at border lines of passing countries.

• Journal of Adhesion and Interface
• /
• v.13 no.4
• /
• pp.171-181
• /
• 2012

The demand characteristics of the conventional 12 kinds of epoxy resins which have been used for restoration of the ceramic relics were investigated to provide standards of the effective materials in this study. The result of durability analysis showed that a liquid type is more effective in ceramic relics (low damage, high strength), and a paste type is more effective in earthenware relics (high damage, low strength). The result of workability analysis appears that the liquid type is higher than the paste type, and a slow curing type is higher than a fast curing type in surface hardness. Therefore, in the case of the liquid type which is hard to reprocess due to high surface hardness, it is necessary to conduct a study on improving physical properties by adding filler. The result of the gloss analysis on epoxy resins showed that the liquid type (colorless) has higher gloss than the paste type, and the slow curing type has higher gloss than the fast curing type in liquid types. CDK-520A/520B and Araldite SV 427-2/HV 427-1 showed the most similar gloss to $700^{\circ}C$ earthenware, Devcon 5 minute, EPO-TEK 301-2, and Quik Wood showed the most similar gloss to celadon and whiteware, Quik Wood, EPO-TEK 301-2, and Devcon 5 minute showed the most similar gloss to buncheongware. It is necessary for conservator to decide the range of the restoration surface by predicting the increase and decrease of the restoration surface because most of the epoxy resins caused the volume change in curing process.

• Korean Journal of Optics and Photonics
• /
• v.14 no.3
• /
• pp.331-337
• /
• 2003

This paper represents 50 ㎓ narrow band pass filters for fiber optical communication fabricated by dual ion beam sputtering method. We have analyzed the characteristics of the TA$_2$ $O_{5}$ and $SiO_2$ single layers in order to optimize the process conditions for the 50 ㎓ narrow band pass filters, and controlled the film thickness uniformity to less than 0.1 nm deviation by dual peak spike filter pre-deposition. We designed and fabricated 50 ㎓ narrow band pass filters that consist of 216 layers including 4 cavities based on quarter wave optical thickness. Class substrates with high thermal expansion coefficients were used to reduce the film stress. Anti-reflection coating at the rear side of the substrate was also needed to reduce the optical thickness errors of the Optical Monitoring System caused by multiple beam interference between the front side and the rear side of substrate. The optical characteristics of this 50 ㎓ narrow band pass filters are insertion loss of 0.40 ㏈, pass band ripple of 0.20 ㏈, and pass bandwidth at -0.5 ㏈ of 0.20 nm. and isolation bandwidth at -25 ㏈ of 0.6 nm, which satisfy specifications of dense WDM system in fiber optical communications.tions.