• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.1B
• /
• pp.1-10
• /
• 2007

We propose a new approach to accommodate bidirectional asymmetric traffic demands as well as unexpected dynamic internet traffic variation in the WDM mesh network by using optical networking technologies. In the proposed scheme, an intermediate node determines the optical path based on the switching statistics of IP router of the node which characterizes the Internet traffic variation, which in effect provides a dynamic and distributed traffic control over the network. It is expected to reduce the efficiency deterioration of RWA(Routing and Wavelength Assignment) due to the real-time variation of Internet traffic so that expandability and flexibility of the network can be enhanced. In this paper, we describe a methodology for traffic behavior analysis at a node, and the decision policy of the establishment/release of optical path. In addition, we evaluate the performance of the proposed scheme through the computer simulations.

• Journal of The Korean Association of Information Education
• /
• v.2 no.2
• /
• pp.162-173
• /
• 1998

Writing a CAI program containing Chinese characters requires a common Chinese character code to share information for educational purposes. A Chinese character code setting needs to allow a mixed use of both vowel and stroke order, to represent Chinese characters in simplified Chinese as well as in Japanese version, and to have a conversion process for data exchange among different sets of Chinese codes. Waste in code area is expected when vowel order is used because heteronyms are recognized as different. However, using stroke order facilitates in data recovery preventing duplicate code generation, though it does not comply with the phonetic rule. We claim that the first and second level Chinese code area needs to be expanded as much as academic and industrial circles have demanded. Also, we assert that Unicode can be a temporary measure for an educational code system due to its interoperability, expandability, and expressivity of character sets.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.47 no.2
• /
• pp.1-10
• /
• 2010

Mapping virtual process topology to physical processor topology is one of the most important design issues in parallel programming. However, the mapping problem is complicated due to the topology irregularity and routing complexity. This paper proposes a new process mapping scheme called adjacency-based mapping (AM) for irregular cluster systems assuming that the two-dimensional mesh process topology is specified as an interprocess communication pattern. The cluster systems have been studied and developed for many years since they provide high interconnection flexibility, scalability, and expandability which are not attainable in traditional regular networks. The proposed AM tries to map neighboring processes in virtual process topology to adjacent processors in physical processor topology. Simulation study shows that the proposed AM results in better mapping quality and shorter interprocess latency compared to the conventional approaches.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.19 no.2 s.72
• /
• pp.161-169
• /
• 2006

The study proposes component models in developing an efficient platform for internet-based structural analysis. Since a structural analysis requires an operation of complicated algorithms, a client-side computation using X-Internet is preferred to a server-side computation to provide a flexible service for multi-users. To compete with the user-friendly interfaces of available commercial analysis programs, a window-based interface using Smart Client was applied. Also, component-based programming was performed with the considerations on reusability and expandability so that active Preparation for future change or modification could be feasible. The components describe the whole system by subdivision and simplification. In the relationship between upper-and lower-level components and also in the relationship between components and objects, a unified interface was used to clearly classify the connection between the libraries. By performing data communication between different types of platforms using XML WebService, a conner-stone of data transfer is proposed for the future integrated CAE. The efficiency of the developed platform has been examined through a sample structural analysis and design on planar truss structures.

• Journal of the Korea Convergence Society
• /
• v.11 no.11
• /
• pp.293-300
• /
• 2020

With constant relaxation of regulations by the government in the 4th industrial innovation era, it has brought huge changes to the education environment as it has created solutions to hindrance factors against introduction of the cloud. Universities are getting more interested in the introduction of the cloud Computing but they still remain at the level of recognition diffusion and creating ambience. The study has analyzed empirical factors of the effect of introduction of the successful case "K Cyber University's Construction of Cloud-Based Remote Education System" through the previous studies on trait factors affecting the introduction of the cloud computing and the analysis of factors in terms of expandability, agility, compatibility, economic feasibility, security, stability and institutional support. Factors drawn through this are meaningful for empirical studies on presenting strategies and the directivity to introduce the cloud computing successfully. This study can be used as the background for further studies which will require various factors prior to introducing the cloud computing.

• The Journal of Korean Academy of Prosthodontics
• /
• v.44 no.6
• /
• pp.712-721
• /
• 2006

Statement of problem. Acrylic resin is most commonly used for denture bases. However, acrylic resin has week points of volumetric shrinkage during polymerization that reduces denture fit. The expandability of POSS (Polyhedral Oligomeric Silsesquioxane) containing polymer could be expected to reduce the polymerization shrinkage of denture bases and would increase the adaptability of the denture to the tissue. Purpose. The purpose of this study was to compare the dimensional stability in the conventional acrylic resin base, POSS-containing acrylic resin base, and metal bases. Materials and methods. Thirty six maxillary edentulous casts and dentures of different base were fabricated. Tooth movement and tissue contour change of denture after processing (resin curing, deflasking, decasting and finishing without polishing) and immersion in artificial saliva at $37^{\circ}C$ for 1 week and 4 weeks were measured using digital measuring microscope and threedimensional laser scanner. Results. The results were as follows: 1. The conventional resin group showed significant (p<0.01) dimensional change throughout the procedure (processing and immersion in artificial saliva). 2. After processing, the metal group and POSS resin group showed lower linear and 3-dimensional change than conventional resin group (p<0.01). 3. There was no statistically significant linear and 3-dimensional change after immersion for 1 week and 4 weeks in metal and POSS resin group. 4. In all groups, the midline and alveolar ridge crest area presented smaller 3-dimensional change compared with vestibule and posterior palatal seal area after processing and soaking in artificial saliva for 1 week and 4 weeks (p<0.01). Conclusion. In this study, a reinforced acrylic-based resin with POSS showed good dimensional stability.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.43 no.4 s.310
• /
• pp.103-112
• /
• 2006

In this paper, we propose a PC based immersive virtual environment system with expandability and compatibility in contrary to existing immersive virtual environment(IVE) systems which have been implemented by supercomputer or special computing system. The application based on commercial personal compute may have two major advantage: one is variety of resources, the other is user-friendly interface. This system intends to offer easy contact to IVE system, realistic images, and convenience. Also, the system can handle various virtual reality at real-time and make it easier to interface existing complicated haptic device. Geometric techniques are adopted to calculate and visualize the physical phenomenon to speed up the computing time. The proposed implementation method of PC based immersive virtual environment system is implemented to the example in which user move around inside of and interact with virtual office environment wearing data glove, behavior recognition devices, and HMD.

• Journal of Korea Game Society
• /
• v.15 no.5
• /
• pp.119-130
• /
• 2015

In the recent gaming industry, the paradigm has been changed with upcoming core-platform as time goes by. Arcade, console, PC online and smart device platforms are representative ones. In recently, the platform is changed to multi-platform which connecting to smart device and other platforms. Besides, the multi-platform without PC is up-coming. This paper suggests that a kind of multi-platform which connecting from smart devices to arcade devices be aware of lack of continuous. It provides a new arcade gaming condition connecting to smart devices, then supplies online network conditions to the arcade gaming machine. The original arcade game was lack of continuous and the game platform was so simple, but now, it could be focused from players by connecting to smart devices to increase the gaming machines' continuity. Furthermore, Bluetooth communication module and wireless Wi-Fi communication module are used to adapt various communication environments. The Unity3D engine would make contents' expandability.

• The Journal of Society for e-Business Studies
• /
• v.10 no.1
• /
• pp.121-134
• /
• 2005

The MANET has many problems in security despite of its many advantages such as supporting the mobility of nodes, independence of the fixed infrastructure, and quick network establishment. In particular, in establishing security, the traditional certification service has many difficult problems in applying to the MANET because of its safety, expandability, and availability. In this paper, a secure and effective distributed certification service method was proposed using the Secret Sharing scheme and the Threshold Digital Signature scheme in providing certification services in the MANET. In the proposed distributed certification service, certain nodes of relatively high safety among the mobile nodes consisting of the MANET, were set as privileged nodes, from which the process of issuing a certification started. The proposed scheme solved problem that the whole network security would be damaged by the intrusion to one node in the Centralized Architecture and the Hierarchical Architecture. And it decreased the risk of the exposure of the personal keys also in the Fully Distributed Architecture as the number of the nodes containing the partial confidential information of personal keys decreased. By the network simulation, the features and availability of the proposed scheme was evaluated and the relation between the system parameters was analyzed.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.3
• /
• pp.1-6
• /
• 2014

Companies almost don't use an integrated control system using expensive network system in multimedia like TV and DID, despite IP-Broadcasting and communication equipment have expanded rapidly. The proposed integrated TCU(terminal control unit) is a control device that supports TV power On/Off check and remote control, power control reservation function, TV channel change, a variety of interface supports of input/output AC power & Lan port, RS-232C and IR using existing IP network after there is installed the Wake-on -Lan in the set-top box. The TCU can control and monitor 24 hours unlike existing low-cost control system RF method. In existing control equipment markets without expandability and low price, the TCU development including 24 hours monitoring and automatic control functions is expected to secure a wide range of companies.