• 한국전기전자재료학회논문지
• /
• 제15권9호
• /
• pp.764-769
• /
• 2002

The effect of excess Bi contents on the ferroelectric properties of B $i_{3.25}$ L $a_{0.75}$ $Ti_3$ $O_{12}$ (BLT) thin films has been investigated. Bismuth lanthanum titanate thin films with excess Bi contents were prepared onto Pt/Ti/ $SiO_2$/Si substrate by metalorganic decomposition (MOD) technique. The structure and morphology of the films were analyzed using X-ray diffraction (XRD) and atomic force microscopy (AFM), respectively. From the XRD analysis, BLT thin films show polycrystalline structure and the layered-perovskite phase was obtained over 10% excess of Bi contents. As a result of ferroelectric characteristics related to the Bi content of the BLT thin film, the remanent polarization and dielectric constant decreased with increasing over Bi content of 10% excess. The BLT film with Bi content of 10% excess was measured to have a dielectric constant of 326 and dielectric loss of 0.024. The BLT thin films showed little polarization fatigue test up to 3.5$\times$10$^{9}$ bipolar switching cycling.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.844-847
• /
• 2001

In this work, transient characteristics of the Non-Punch Through(NPT) Insulated Gate Bipolar Transistor(IGBT) has been studied. we has analyzed with lifetimes excess minority carrier injected into N-dirft, base region of IGBT's BJT part and accumulated charge of on-state which affected swiching characteristic. In this paper, excess minority carrier and charge distribution in active base region is expressed analytically. This analysis proposed optical trade-off between lifetimes and accumulated charge for decreasing switching losses because charge result in switching loss when device was tuned off.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.371-374
• /
• 2002

Bismuth lanthanum titanate thin films with excess Bi contents were prepared onto Pt/Ti/$SiO_2$/Si substrate by metalorganic decomposition (MOD) technique. The structure and morphology of the films were analyzed using X-ray diffraction (XRD) and atomic force microscopy (AFM), respectively. From the XRD analysis, BLT thin films show polycrystalline structure and the layered-perovskite phase was obtained over 10% excess of Bi contents. As a result of ferroelectric characteristics related to the Bi content of the BLT thin film, the remanent polarization and dielectric constant decreased with increasing over Bi content of 10 % excess. The BLT film with Bi content of 10% excess was measured to have a dielectric constant of n9 and dielectric loss of 1.85[%]. The BLT thin films showed little polarization fatigue test up to 3.5 x $10^{9}$ bipolar switching cycling.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.888-892
• /
• 2008

If gas hydrate dissociates due to natural and/or human activities, it generates large amount of gas and water. Upon gas hydrate dissociation, a generated pore water pressure between soil particles increases and results in the loss of an effective stress and degradation of soil stiffness and strength. In order to predict the generated excess pore water pressure due to gas hydrate dissociation, two methods based on small hydrate concept (SHC) and large hydrate concept (LHC) are proposed. An excess pore water pressure generated by the gas hydrate dissociation in the Storegga Slide was calculated using two proposed methods.

• 대한전자공학회논문지TC
• /
• 제42권9호
• /
• pp.19-28
• /
• 2005

본 논문에서는 실제 아파트 환경에서 2000번의 주파수 응답에 의한 통계적 UWB 실내 채널 모델을 연구하였다. 측정은 서로 다른 방, 서로 다른 위치에서 이루어 졌으며, 실험 결과를 통해 채널의 전파특성을 이론적으로 설명하였다. Time-domain상에서 측정할 수 있는 channel impulse response (CIR)와 frequency-domain상에서 측정할 수 있는 channel transfer function (CTF) 측정방법을 제안하였다. 측정데이터를 통해서 CIR과 CTF를 비교하여 분석하였고, 통계적 경로손실 모델 또한 제안하였다. 신호 대역은 10MHz에서 8.010Hz까지 사용하였다. 측정결과를 통해 time-domain상에서 확인할 수 있는 maximum excess delay, mean excess delay, ms delay spread를 나타내었다. 송신기와 수신기에는 전방향의 biconical 안테나를 사용하였다. 또한 제안된 아파트 환경에서의 채널 모델은 UMB용 안테나 특성이 포함된 결과이다.

• Archives of Plastic Surgery
• /
• 제37권5호
• /
• pp.681-686
• /
• 2010

Purpose: Obese proportion is increasing universally, estimating more than a billion. So reducing the weight became one of the topic in medical market. Not only diet, exercise, medication, but also many surgical procedures are being developed, such as sleeve gastrectomy, gastric bypass surgery. After massive weight loss, skin excess and laxity occurs, leading to unsatisfying body contour. Body contouring surgery including abdominoplasty, breast reduction is performed when skin excess is present in abdomen and breast. When skin excess is present circumferentially, belt dermolipectomy is the treatment of choice. Methods: A 23-year-old man had weight gain since he was 12 of age. A year before visiting to our department, his height was 168 cm, weight was 150 kg and body mass index (BMI) was 53.15 kg/$m^2$. The patient lost 55 kg of his weight through exercise and diet control. When he visited again, his weight was 95 kg and BMI was 33.66 kg/$m^2$. In physical examination, skin excess and laxity was seen in both breast and abdomen circumferentially and lateral folds were seen in the back. Abdominal contour deformity (Pitman classification type 6) and pseudogynecomastia (grade 3) were present in both breast. Belt dermolipectomy of abdomen, both breast and lateral folds was performed, resecting 6,400 g of tissue and additive 1,200 g through revisional operation. Results: The patient lost 6,500g of his weight and BMI reduced by 2.3 kg/$m^2$. The patient's hospital course was uneventful during 5 weeks of hospitalization and he was satisfied with his final body contour. Conclusion: Body contouring with belt dermolipectomy in patient who has circumferential skin excess and laxity after massive weight loss can be a treatment of choice.

• Journal of the Optical Society of Korea
• /
• 제9권3호
• /
• pp.99-102
• /
• 2005

Directional couplers of gradient-index plastic optical fibers were fabricated and characterized. In particular, we have employed a core-facet technique to make the directional couplers, which require mechanical side polishing and linkage. We have measured insertion loss, excess loss, and coupling ratio of the fabricated couplers as a function of polishing depth and coupling length. We found that polishing depth of $\~300{\mu}m$ and coupling length of $\~35mm$ are optimum conditions for minimizing the insertion and excess losses and for achieving 1: 1 coupling ratio.

• Bulletin of the Korean Chemical Society
• /
• 제15권3호
• /
• pp.241-245
• /
• 1994

A method has been developed to estimate the kinetic energy release originating from the reverse critical energy in unimolecular ion dissociation. Contribution from the excess energy was estimated by RRKM theory, the statistical adiabatic model and the modified phase space calculation. This was subtracted from the experimental kinetic energy release distribution (KERD) via deconvolution. The present method has been applied to the KERDs in $H_2$, loss from $C_6H_6^+$ and HF loss from ${CH_2CF_2}^+$. In the present formalism, not only the energy in the reaction coordinate but also the energy in some transitional vibrational degrees of freedom at the transition state is thought to contribute to the experimental kinetic energy release. Details of the methods for treating the transitional modes are found not to be critical to the final outcome. For a reaction with small excess energy and large reverse critical energy. KERD is shown to be mainly governed by the reverse critical energy.

• 플랜트 저널
• /
• 제14권2호
• /
• pp.39-44
• /
• 2018

본 연구에서는 870 MW 대형 석탄화력 발전소에서 출력을 고정시키고 과잉공기비 조정만으로 통풍계통 안정 및 보일러 효율에 어떠한 변화가 있는지를 분석하였으며 이에 따른 적정 과잉공기비를 선정하였다. 과잉공기비 조정에 따라 공기예열기 압력강하, 유인송풍기 실속여유 등이 변하므로 통풍계통 안정화를 위해 적정 과잉공기비 선정은 반드시 필요하다. 따라서 본 연구에서는 과잉공기비를 통상 운전 값인 1.153에서 운전지침서상의 하한 값인 1.127까지 단계적으로 조정하여 공기예열기 압력강하, 유인송풍기 1차 실속여유, 보일러 효율, 각종 손실 등을 측정하였고 보일러 효율도 동등수준이상으로 유지하면서 통풍계통도 위험수준에서 안전하게 이격시켜 안정화에 기여할 수 있는 적정 과잉공기비를 선정하였다. 적정 과잉공기비는 운전지침서 상의 하한 값인 1.127까지 낮추어 운전하는 것이 바람직하다고 판단된다.

• 한국자동차공학회논문집
• /
• 제12권2호
• /
• pp.24-31
• /
• 2004

A cylindrical constant volume combustion bomb is used to investigate the combustion characteristics and to analyzer the heat quantity of inhomogeneous charge methane-air mixture. To analyze the heat quantity, some definitions including the CHR ratio, the UHC ratio and the HL ratio are needed and are calculated. It is shown that the effect of stratification is not significant in case of the overall excess air ratio of 1.1, mainly due to the higher heat loss and lower thermal efficiency compared to those of homogeneous condition. In the case of the overall excess air ratio of 1.4, as the initial charge pressure decreases, the CHR ratio has been decreased while the HL ratio has been increased, Generally, as the initial charge pressure increases, the amount of injection mixture has been decreased and has resulted in lower mean velocity and turbulence intensity for injection mixture. Also, the injected mixture is too rich to result in mixing deficiency in combustion chamber. From these results, it could be possible to acquire the improvement of thermal efficiency and the reduction of heat loss simultaneously through the 2-stage injection in CNG direct injection engine.