• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 지반공학 공동 학술발표회
• /
• pp.3-14
• /
• 2005

Reliable predictions of the movement of earth retaining structures and the ground adjacent to braced walls in urban excavation are often difficult due to many variable factors. The ground settlement and the damage of adjacent structures in urban excavation has been an important issue. Therefore, the stability of the adjacent structures must be secured with the excavation support and research on the protection of adjacent structure is necessary. This study showed an urban excavation case and introduce observation method for case of damage behavior in urban excavation.

• 한국지반공학회논문집
• /
• 제22권2호
• /
• pp.19-28
• /
• 2006

굴착 공정에 따른 주변지반의 거동 특성을 파악하기 위하여 굴착 깊이가 15m$\∼$29m인 3개 굴착현장에서 장기간에 걸쳐 계측을 실시하고 그 결과를 분석하였다. 이 논문에서는 본 굴착뿐만 아니라 토류벽 설치 및 지보 해체 작업이 굴착 주변지반의 거동에 미치는 영향을 정량적으로 평가하기 위하여 전체 굴착 공정을 굴토 전 준비 공정, 본 굴착 공정, 지보 해체의 세 공정으로 구분하여 계측을 수행하였다. 3개 굴착현장에서 이루어진 계측결과에 의하면, 지보 해체로 인하여 추가적으로 발생한 벽체 수평변위는 본 굴착단계에서 발생한 변위의 약 40$\%$ 내외였으며, 지표침하의 경우에는 본 굴착 시 발생한 침하체적의 $18\%\∼33\%$가 발생하였다. 이와 같은 현장계측 결과를 통하여, 굴착 전 및 지보 해체 공정 중에도 무시할 수 없을 정도의 지반 변위가 발생할 수 있음을 정량적으로 확인하였다.

• Geomechanics and Engineering
• /
• 제35권2호
• /
• pp.109-119
• /
• 2023

Ground subsidence in urban areas due to excessive development and degraded underground facilities is a serious problem. Geophysical surveys have been conducted to estimate the distribution and scale of cavities and subsidence. In this study, electrical resistivity tomography (ERT) was performed near an area of road subsidence in an urban area. The subsidence arose due to groundwater leakage that carried soil into a neighboring excavation site. The ERT survey line was located between the main subsidence area and an excavation site. Because ERT data are affected by rapid topographic changes and surrounding structures, the influence of the excavation site on the data was analyzed through field-scale numerical modeling. The effect of an excavation should be considered when interpreting ERT data because it can lead to wrong anomalous results. A method for performing 2D inversion after correcting resistivity data for the effect of the excavation site was proposed. This method was initially tested using a field-scale numerical model that included the excavation site and subsurface anomaly, which was a loosened zone, and was then applied to field data. In addition, ERT data were interpreted using an existing in-house 3D algorithm, which considered the effect of excavation sites. The inversion results demonstrated that conductive anomalies in the loosened zone were greater compared to the inversion that did not consider the effects of excavation.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회
• /
• pp.1087-1094
• /
• 2010

With recent growth of population and industry, urban development grows into grand scheme of excavation and construction in urban area. As the development progress advanced, the developments get large and deepen. With a progress of technology development in geotechnical engineering in Korea, most our grand scheme of projects follows great progress. On the other hand, some excavation in construction site caused direct or indirect event that affects the adjacent or surrounding structures by excavation from time to time. This event usually happens around residential and commercial area where underground tunnel, subway station, commercial building, and high-rises excavation site is, could lead great damage on economy as well as personal injury or human casualties. In order to prevent this event, the study has to be done with analysis on various events of excavation and its cause. In this paper, the research has collected the various excavation events and their causes to analyze on each site and event to define emphasis on surrounding environment.

• 국제학술발표논문집
• /
• The 7th International Conference on Construction Engineering and Project Management Summit Forum on Sustainable Construction and Management
• /
• pp.242-244
• /
• 2017

Excavation for construction is implemented in natural geographical terrain using a variety of construction equipment. Therefore, 3D excavation simulation requires integration of geographical and equipment modeling. This paper proposes a technique that integrates geographical and equipment modeling for 3D simulations of construction excavation. The geographical model uses a digital map to show ground surface changes during excavation and the equipment model shows equipment movement and placement. This combination produced a state of the art 3D simulation environment that can be used for machine guidance. An equipment operator can use the 3D excavation simulation to help construction equipment operators with decisions during excavation work and consequently improve productivity.

• 한국지반공학회논문집
• /
• 제36권12호
• /
• pp.57-68
• /
• 2020

흙막이 벽체의 해석 시 일반적으로 적용되는 2차원 해석의 경우 굴착 폭이 작으면 토압에 의한 상호간섭이 발생하며, 그 영향으로 굴착 폭이 작은 구간에서는 2차원 해석 시 흙막이 벽체의 수평변위에 대한 신뢰성 확보가 어렵다. 따라서 본 연구에서는 2차원 해석 시 토압에 의한 상호간섭 발생의 범위가 되는 굴착 폭의 경계를 확인하기 위하여 H-pile 토류벽체에 대하여 점성토, 사질토, 사질토 및 풍화암의 지층조건에서 다양한 조건의 굴착 깊이(H)와 굴착 폭(B)에 대하여 2차원 및 3차원 유한요소해석을 수행하여 각 조건에 따른 굴착 폭과 수평변위의 관계를 연구하였다. 연구결과 수평 변위가 비교적 크게 발생하는 점성토에서만 굴착 폭에 따른 해석적 경계를 뚜렷하게 구분할 수 있었고, 그 내용은 굴착규모(B/H) 2.0 이하, 굴착 깊이 10m 이하에서 굴착 폭이 12m보다 작은 경우와 굴착 깊이 10m 이상에서 굴착 폭이 24m보다 작은 경우는 실제 거동과 유사한 3차원 유한요소해석을 하는 것이 합리적이며, 굴착규모(B/H) 2.0 이상, 굴착 깊이 10m 이하에서 굴착 폭이 12m보다 큰 경우와 굴착 깊이 10m 이상에서 굴착 폭이 24m보다 큰 경우는 2차원 유한요소해석을 하여도 무방하다는 결론을 얻었다.

• 한국터널지하공간학회 논문집
• /
• 제25권2호
• /
• pp.87-99
• /
• 2023

지반굴착은 필연적으로 인접지반의 지반변위를 유발시키며, 지반변위에 노출된 구조물 및 시설물들은 다양한 피해를 입을 수 있다. 따라서 굴착유발 인접구조물 및 시설물의 손상 및 피해를 최소화하기 위해서는 우선적으로 굴착으로 인해 발생하는 인접지반에서의 지반변위(침하 및 수평변위)를 예측하여야 한다. 흙막이 굴착 유발 지반변위 정보는 상대적으로 많이 존재하지만 원형 형태의 수직구 굴착에 대한 지반변위 정보는 충분치 않다. 본 연구에서는 수직구 굴착에 대한 사례분석 및 흙막이 굴착과의 비교를 통해서 수직구 굴착유발 인접지반 침하예측에 대한 정보를 제공하고자 한다. 본 연구를 통해서 수직구 굴착 시 침하관리 기준으로서 흙막이 굴착의 침하기준을 사용하는 것은 안전성 측면에서 보수적인 접근방법으로 판단되나 경제성 측면을 고려할 때 벽체의 과다설계를 초래할 수 있어 수직구 굴착에 대해 보다 합리적인 침하기준이 필요한 것으로 나타났다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.248-259
• /
• 2010

In the case of relatively good ground and construction condition in the deep excavation for the construction of subway, railway, building etc., flexible earth retaining systems are often used in an economical point of view. It is generally known that the mechanism of behavior in the flexible earth retaining system is relatively more complicated than the rigid earth retaining system. Moreover in the case of long span strut supporting system the analysis of strut axial force change becomes more difficult when the differences of ground condition and excavation work progress on both sides of excavation section are added. When deeper excavation than the specification or installation delay of supporting system is done or change of ground condition is faced due to the construction conditions during construction process, lots of axial force can be induced in some struts and that can threaten the safety of construction. This paper introduces one example of long span deep excavation where struts and rock bolts were used as a supporting system with flexible wall structure. The characteristics of ground deformation and strut axial force change, the measured data obtained during construction process, were analysed, the effects of relatively deeper excavation than the specification on one excavation side and rapid drawdown of ground water level on the other excavation side were deeply investigated from the viewpoint of mutual influences between ground deformations of both excavation sides and strut axial force changes. The effort of this article aims to improve and develop the technique of design and construction in the coming projects having similar ground condition and supporting method.

• 한국환경과학회지
• /
• 제33권4호
• /
• pp.269-277
• /
• 2024

Scientific forensic techniques are used to verify environmental impact of groundwater pollution, surface water pollution, air pollution, noise, and vibration according to residents' complaints in connection with construction and civil engineering works. In this study, we investigated the contamination of groundwater and the lowering of the groundwater level in an area surrounding a tunnel excavation site for the Andong-Yeongdeok national road, using a forensic hydrogeological technique. We reviewed the groundwater level and water quality of well GW1 in the area surrounding the tunnel excavation site as well as tunnel construction information and then we analyzed the correlations among the obtained data. Before tunnel excavation, the water level of well GW1 was lower than the tunnel elevation. Considering the relationship between the precipitation, tunnel discharge, tunnel depth, and groundwater level of well GW1, the groundwater flowed from the tunnel to well GW1. Moreover, the tunnel discharge and groundwater levels were not related to each other. The pH of well GW1 was 8.4 before tunnel excavation. During excavation, the pH declined to 8.1-8.2 at the beginning, and increased to 8.8 at the end of the excavation. The fluorine concentration in well GW1 was 2.49 mg/L, 1.91-3.22 mg/L, and 1.7-2.67 mg/L, respectively, before, during, and after the excavation. The sulfate ion concentration was very high, over 2,000 mg/L, before and during the excavation; after the excavation, it was between 200 and 323 mg/L. Turbidity was 1.47, 10.5, and 4.51 NTU before, during, and after tunnel excavation, respectively. Therefore, the excavation of this tunnel is not related to the groundwater quality of well GW1.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1992년도 봄 학술발표회 논문집
• /
• pp.111-117
• /
• 1992

In order to design and construct a safe and economic underground structure, it is essential to understand the structural behavior of underground openings considering the effect of the sequential excavation. Therefore, this paper includes the study of initial stress distribution before excavation and stress redistribution due to the sequential excavation. And discussion on numerical simulation techniques for the sequential excavation is also included. Then, the underground structure is analyzed using the finite element and distinct element methods of analysis considering the effect of the sequential excavation. Based on the results of the analysis, the followings are discussed: shape of the openings, effect and timing of structural reinforcements. methods and sequence of excavation.