• Journal of Electrical Engineering and Technology
• /
• v.12 no.5
• /
• pp.1934-1944
• /
• 2017

As a key component of high-voltage power conversion system for electric vehicles (EVs), bidirectional DC/DC (Bi-DC/DC) is required to have high efficiency and light weight. Conventional design methods optimize the Bi-DC/DC at the maximum power dissipation point (MPDP). For EVs application, the work condition of the Bi-DC/DC is not strict as the MPDP, where the design method using MPDP may not be optimal during travel of EVs. This paper optimizes the Bi-DC/DC converter targeting efficiency and weight based on the driving cycle. By analyzing the two-phase interleaved Bi-DC/DC for hybrid energy storage systems (HESS) of EVs, its power dissipation is calculated, and an efficiency model is derived. On this basis, weight models of capacitor, inductor and heat sink are built, as well as a dynamic temperature model of heat sink. Based on these models, a method using New European Driving Cycle (NEDC) for optimal design of Bi-DC/DC which simultaneously considered efficiency and weight is proposed. The simulation result shows that compare with conventional optimization methods revealed that the optimization approach based on driving cycle allowed significant weight reduction while meeting the efficiency requirements.

• Journal of the Korean Solar Energy Society
• /
• v.34 no.6
• /
• pp.1-10
• /
• 2014

The efficiency of the maximum power point tracking(MPPT) of inverter which is used in grid-connected photovoltaic systems is changed according to dynamic environment conditions. Hence, this paper evaluates the performance of the proposed method and other MPPT algorithm on the basis of European Efficiency Test(EN50530). The modeling of MPPT algorithm is made by the Matlab & Simulink. In the result of simulation, the more control period is shorter, the more MPPT efficiency is higher. Also, the Proposed MPPT algorithm has higher performance than other MPPT algorithm with no regard to control period.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.08a
• /
• pp.228-229
• /
• 2000

Buried channel JET-X CCDs (Joint European X-ray Telescope Charge Coupled Devices: EEV CCD12) with a deep depletion have been analyzed to provide an optimized condition for a charge storage and transfer. A maximum charge capacity has been found for the supplementary narrow channel by considering the potential distribution as a function of a mobile charge. Analysis for the depletion edges of JET-X CCDs have been successfully performed, showing good agreement with the depths estimated from X-ray detection efficiency measurements [1]. (omitted)

• Journal of Power Electronics
• /
• v.15 no.6
• /
• pp.1640-1653
• /
• 2015

This study presents a model of a drivetrain for an integrated design of a light electric vehicle (EV). For the drivetrain of each front wheel of the single-person, battery-powered EV tricycle consists of a battery, an inverter, and an outer rotor permanent magnet synchronous motor (PMSM), which is connected to an in-wheel gearbox. The efficiency of the inverter, motor, and gearbox is analyzed over the New European Driving Cycle. To calculate the losses and efficiency of the PMSM, the power electronics in the inverter and gearbox are used. The analytical models provide a fast, but less accurate result, useful for optimization purposes. To accurately predict the efficiency of the PMSM, a finite element model is used. The models are validated by test setups. Correspondingly, a good agreement between the measurements and the calculated results is achieved. A parameter study is performed to investigate the influence of the detailed component parameters (i.e., outer rotor radius, gear ratio, and number of pole pairs and stator slots) on the average efficiency of the drivetrain.

• Journal of Dairy Science and Biotechnology
• /
• v.33 no.3
• /
• pp.171-177
• /
• 2015

In March 2015, the milk quota system in Europe that had lasted for more than 30 years was abolished to improve the competitiveness of the European dairy sector in the international market. Despite an increase in the consumption of dairy products in Europe, the milk price is expected to stabilize in the next decade after a decrease between 2015 and 2016. This stabilization of prices will be caused by a significant increase in production, with the proportion exceeding domestic demand to be exported. In the international market, the price of milk will reduce in the next decade, leading to a restructuring of the milk sector with a lower number of farms, but with higher production and efficiency. Mountain farms will follow the same trend, although these farms play an important social role by providing ecosystem services such as maintaining cultural services, reducing greenhouse gas emissions, promoting soil stability, and improving the aesthetic value of the landscape. Nevertheless, they remain at a disadvantage compared with lowland farms. To prevent the loss of mountain farms, there is thus a need to valorize the ecosystem services that they provide and promote the processing of milk into certified products of high quality.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.11a
• /
• pp.680-685
• /
• 2006

The latest trend in the automotive industry demands the development of high stiffness car bodies and the securement of inter-system performance for low vibration and noise vehicles. This demand, however, conflicts with need for light weight design and greater fuel efficiency, thus raising the importance of optimization design to satisfy both developmental goals. We chose two European medium sedans, which has gasoline engine and diesel one, to elucidate the noise characteristics of diesel passenger cars, whose sales have been increasing in both Korea and Europe. In the present study a systematic experiment was conducted to analyze the noise characteristics in diesel cars. we made it possible for differentiating car management according to customer demand while allowing for improved commercial feasibility. it was possible to improve interior noise by 2 dB(A) on average sound pressure level. As a result, by 4% higher on articulation index(AI).

• Korean Journal of Organic Agriculture
• /
• v.11 no.4
• /
• pp.75-92
• /
• 2003

Organic livestock farming in northern European regions has been expanded with the major animals of large ruminants using pastures and grass silages. Organic livestock farming in some European countries has been in rather short of productivity compared to the conventional livestock farming, however since the gap of productivity between organic and conventional livestock farming has been reported to be reduced when the efficiency of management would improve, organic livestock farming has a potential to develop as a clean livestock farming in the future. We expect that organic livestock farming be propelled to a future model of livestock farming in Korea too. As the schemes for realization of organic livestock farming in Korea, firstly a system for the consistent supply of organic feed should be established. Mountainous areas that represents 63 % of total area of Korea could be utilized for the production of organic forages. Uncultivated rice paddy and upland agricultural field could also be used for this purpose. The active application of organic agricultural by-products such as organic rice straw, organic rice bran and SO forth can be considered for organic livestock farming. Secondly, the replacement of anti-biotics for the management of animal diseases should be developed using natural products. Plants and microbes would be good sources of natural products. Thirdly, the realization of organic livestock farming may require a system for certification of the organic farms and consequently the experts to work on.

• 한국태양에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.356-360
• /
• 2009

Recent global environmental pollution and contamination and depletion of limited fossil energy prices surge as an energy source to replace it depending on wind, fuel cells and solar power and other renewable and pollution free renewable energy is of interest in increase. The photovoltaic systems are pollution-free, unlimited energy source, and easy to install because it is rated as the most valuable renewable energy sector and the prevalence is spreading throughout the world. Photovoltaic systems at one end of the stable development of the role that solar power inverter applications can be the most important. No matter how much power the solar arrays, even if the inverter output in the normally if he's no use. These photovoltaic inverters to evaluate the performance of the inverter efficiency measures that can be called directly. This way of measuring the efficiency of solar inverters in Europe efficiency and CEC efficiency is currently being used. In this paper, until now about how to measure the efficiency of solar power inverter technology and the new Korean Meteorological Solar Insolation data analysis to derive weights based on this inverter efficiency for Korea is to offer.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.1668-1673
• /
• 2007

In light of the growing traffic congestion problem and congestion cost, the container transport by railway has to be increased. The freight transport by railway can have decided advantages over trucks in terms of energy efficiency, emissions and cost for certain freight movements, just as transportation in the metropolitan region can have great advantages over driving truck. But the freight transport by truck should gain significant mobility benefits from a freight railway system. Thus, the DMT(Dual Mode Trailer) transport system which is coupled railway transport advantages with load transport advantages has been developed and used in the european countries. The DMT transport will therefore serve the areas required by transport organizers. This paper describes the various DMT transport systems and its strength and weakness.

• Proceedings of the SAREK Conference
• /
• 2006.06a
• /
• pp.436-441
• /
• 2006

In recent European telecommunication base transceiver stations(BTS) a membrane laminated air filter is reported to replace a heat exchanger in order to cool internal digital units of BTS. The concept of using the air filter is for the direct ambient cooling(DAC) of BTSs without heat loss generally found ill the heat exchanger type BTS. In the present study, a performance evaluation experiment was conducted to investigate the pressure drop characteristics with dust loading and the particle collection efficiency of the air filter for the DAC of BTS.