• Journal of Surface Science and Engineering
• /
• v.52 no.6
• /
• pp.298-305
• /
• 2019

We investigated a correlation between morphology and photoelectrochemical properties of TiO₂ nanotubes fabricated by well-controlled anodization processes. Anodization in an ethylene-glycol-based electrolyte solution accelerated the rapid grow rate of TiO₂ nanotubes, but also cause problems such as delamination at the interface between TiO₂ nanotubes and a Ti substrate, and debris on the top of the nanotube. The applied voltages for the anodization of TiO₂ were adjusted to avoid the interface delamination. The heat treatment and the anodizing time were also controlled to enhance the crystallinity of the as-prepared TiO₂ nanotubes and to increase the surface area with the varied length of the anodized TiO₂ nanotubes. Additionally, a 2-step anodization process was utilized to remove the debris on the tube top. The photoelectrochemical properties of TiO₂ nanotubes prepared with the carefully tailored conditions were investigated. By removing the debris on TiO₂ nanotubes, applied bias photon-to-current efficiency (ABPE) of TiO₂ nanotubes increased up to 0.33%.

• Journal of Conservation Science
• /
• v.6 no.2 s.8
• /
• pp.126-140
• /
• 1997

There were some cases in the past that waterlogged wooden finds were neglected and damaged severely because adequate methods of conservation processing could not be found. However, since a wooden ship unearthed in Anapji of Kyongju was processed by poly(ethylene glycol) (PEG) impregnation method in 1975, most of waterlogged wooden finds have been processed by diverse scientific methods. Most commonly-used conservation processing methods of waterlogged wooden finds in Korea are PEG impregnation method, alcohol-ether-resin method and vacuum freeze-drying method. New methods developed recently in Europe and Japan such as sucrose method, sugar-alcohol method and higher alcohol method are also being studied here. The most important task in conservation processing of waterlogged wood is to find good impregnation materials suitable to Korean climate and environments and develop their application methods. For efficient conservation processing, it is important to know the natures of finds and impregnation materials and relation between impregnation and drying condition. To achieve it, many experiments and studies are needed.

• Journal of Embryo Transfer
• /
• v.12 no.1
• /
• pp.67-74
• /
• 1997

This study was carried out to increase the viability of bovine frozen4hawed in vitro produced (IVP) embryos and pregnancy rate by direct transfer method. Cumulus-oocyte complexes were aspirated from excised Hanwoo ovaries and matured in TGM 199 for 20~22 hours at 38.5$^{\circ}C$ in 2% $CO_2$ in air. Matured oocytes were fertilized with capacitated sperm for 6 hours and then co-cultured with cumulus cells for 9 days. 63% of the oocytes cultured was deaved and 29% out of them developed into blastocysts. Good or excellent grade of blastocysts on D 7 or 8 were frozen with 1.8M ethylene glycol as a cryoprotectant for direct transfer. Frozen embryos were thawed at 2$0^{\circ}C$ water for 10 sec following 4~5 second in air. For the survival assay of frozen4hawed lVP blastocysts, they were cultured in TCM 199 supplemented with 100$\mu$M $\beta$-mercaptoethanol and 20% FCS for 72 hours. The percentage of embryos developed to re-expanded or hatched after 72 hours culture was 95. 5 and 77.3%, respectively. When frozen-thawed Ivp embryos were transferred to 43 synchronized recipients by direct transfer method, eighteen recipients (41.8%) was pregnant. The highest pregnant was in naturafly synchronized recipients (71.4%), but induced estrus by using PRID(29.2%) and PGF$_2$$\alpha$(20.0%) was showed lower pregnancy rate. The pregnancy rate was higher in day 7 blastocysts(56.0%) than day 8 blastocysts(22.2%). (Key words: in vitro produced, blastocyst, frozen-thawed, direct transfer)

• Journal of Embryo Transfer
• /
• v.18 no.3
• /
• pp.179-186
• /
• 2003

Human embryonic stem (hES) cell lines have been derived from human blastocysts and are expected to have far-reaching applications in regenerative medicine. The objective of this study is to improve freezing method with less cryo-injuries and best survival rates in hES cells by comparing various vitrification conditions. For the vitrifications, ES cells are exposed to the 4 different cryoprotectants, ethylene glycol (EG), 1,2-propanediol (PROH), EG with dime-thylsulfoxide (DMSO) and EG with PROH. We compared to types of vehicles, such as open pulled straw (OPS) or electron microscopic cooper grids (EM grids). Thawed hES cells were dipped into sequentially holding media with 0.2 M sucrose for 1 min, 0.1 M sucrose for 5 min and holding media for 5 min twice and plated onto a fresh feeder layer. Survival rates of vitrified hES cells were assessed by counting of undifferentiated colonies. It shows high survival rates of hES cells frozen with EG and DMSO (60.8％), or EG and PROH(65.8％) on EM grids better than those of OPS, compared to those frozen with EG alone (2.4％) or PROH alone (0％) alone. The hES cells vitrified with EM grid showed relatively constant colony forming efficiency and survival rates, compared to those of unverified hES cells. The vitrified hES cells retained the normal morphology, alkaline phosphates activity, and the expression of SSEA-3 and 4. Through RT-PCR analysis showed Oct-4 gene expression was down-regulated and embryonic germ layer markers were up-regulated in the vitrified hES cells during spontaneous differentiation. These results show that vitrification method by using EM grid supplemented with EG and PROH in hES cells may be most efficient at present to minimize cyto-toxicity and cellular damage derived by ice crystal formation and furthermore may be employed for clinical application.

• Environmental Engineering Research
• /
• v.23 no.3
• /
• pp.294-300
• /
• 2018

Cometabolism technology was employed to degrade lignin wastewater in Sequencing Batch Biofilm Reactor. Cometabolic system (with glucose and lignin in inflow) and the control group (only lignin in inflow) were established to do a comparative study. In contrast with the control group, the average removal rates of lignin increased by 14.7% and total oarganic carbon increased by 32% in the cometabolic system with glucose as growth substrate, under the condition of 5 mg/L DO, $0.2kgCOD/(m^3{\cdot}d)$ lignin and glucose $1.0kgCOD/(m^3{\cdot}d)$. Functional groups of lignin are degraded effectively in cometabolic system proved by fourier transform infrared spectroscopy and Gas Chromatography-Mass Spectrometer, and the degradation products were amides (mainly including acetamide, N-ethylacetamide and N, N-diethylacetamide), alcohols (mainly including glycerol and ethylene glycol) and acids. Meanwhile, results of Polymerase Chain Reaction-Denaturing Gradient Gel Electrophoresis showed great differences in microbial population richness between cometabolic system and the control group. The Margalef's richness index and Shannon-Wiener's diversity index of microorganism in cometabolic system were 3.075 and 2.61, respectively. The results showed that extra addition of glucose, with a concentration of 943 mg/L, was beneficial to lignin biodegradation in cometabolic system.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.286-287
• /
• 2006

Barium titanate ($BaTiO_3$) glycolate particles were synthesized at temperature as low as $100^{\circ}C$ through glycothermal reaction by using $Ba(OH)_2{\cdot}8H_2O$ and amorphous titanium hydrous gel as precursors and ethylene glycol as solvent. The particle size and morphology of $BaTiO_3$ glycolate powders can be controlled by varying the reaction conditions such as the reaction temperature and Ba:Ti molar ratio of starting precursors. After glycothermal treatment at $220^{\circ}C$ for 24 h in 1.25:1(Ba:Ti), the average particle size of the $BaTiO_3$ glycolate powder was about 200-400 nm and low agglomeration. $BaTiO_3$ powders were formed by heat-treating the glycolate powder in air at $500-1000^{\circ}C$. As a result, the size of $BaTiO_3$ crystallites changed from around 50-300 nm. It is also demonstrated that the size and shape of $BaTiO_3$ particles investigated as a function of calcination temperature. The $BaTiO_3$ particles obtained from optimum synthesis condition were pressed, sintered and measured for the dielectric property. The $BaTiO_3$ ceramics sintered at $1250^{\circ}C$ for 2 h had 98 % of theoretical density. The ceramics have an average grain size of about $1\;{\mu}m$ and displays the high dielectric constant (~3100) and low dielectric loss (<0.1) at room temperature.

• Journal of Soil and Groundwater Environment
• /
• v.21 no.2
• /
• pp.8-14
• /
• 2016

We compared the plausible reaction mechanism and quantitative efficiency of highly self-organized TiO₂ nanotube (ntTiO₂) film with TiO₂ powder. Film was fabricated by electrochemical potentiostatic anodization of titanium thin film in an ethylene-glycol electrolyte solution containing 0.3 wt% NH₄F and 2 vol% deionized water. Nanotubes with a pore size of 80-100 nm were formed by anodization at 60 V for 3 h. Humic acid (HA) was degraded through photocatalytic degradation using the ntTiO₂ film. Pseudo first-order rate constants for 0.3 g of ntTiO₂, 0.3 g TiO₂ powder, and 1 g TiO₂ powder were 0.081 min⁻¹, 0.003 min⁻¹, and 0.044 min⁻¹, respectively. HA adsorption on the ntTiO₂ film was minimal while adsorption on the TiO₂ powder was about 20% based on thermogravimetric analysis. Approximately five-fold more normalized OH radicals were generated by the ntTiO₂ film than the TiO₂ powder. These quantitative findings explain why ntTiO₂ film showed superior photocatalytic performance to TiO₂ powder.

• Macromolecular Research
• /
• v.15 no.5
• /
• pp.437-442
• /
• 2007

Poly(ethylene glycol) methyl ether (PEG)-poly(${\beta}$-amino ester) (PAE) block copolymers were synthesized using a Michael-type step polymerization, and the construction of pH-sensitive polymeric micelles (PM) investigated. The ${\beta}$-amino ester block of the block copolymers functioned as a pH-sensitive moiety as well as a hydrophobic block in relation to the ionization of PAE, while PEG acted as a hydrophilic block, regardless of ionization. The synthesized polymers were characterized using $^1H-NMR$, with their molecular weights measured using gel permeation chromatography. The $pK_b$ values of the pH-sensitive polymers were measured using a titration method. The pH-sensitivity and critical micelle concentration (CMC) of the block copolymers in PBS solution were estimated using fluorescence spectroscopy. The pH dependent micellization behaviors with various bisacrylate esters varied within a narrow pH range. The critical micelle concentration at pH 7.4 decreased from 0.032 to 0.004 mg/mL on increasing the number of methyl group in the bisacrylate from 4 to 10. Also, the particle size of the block copolymer micelles was determined using dynamic light scattering (DLS). The DLS results revealed the micelles had an average size below 100 nm. These pH-sensitive polymeric micelles may be good carriers for the delivery of an anticancer drug.

• Korean Journal of Food Science and Technology
• /
• v.19 no.4
• /
• pp.285-289
• /
• 1987

The partition behavior or proteins in an aqueous two-phase system of poly (ethyleneglycol)-potassium phosphate buffer (PEG/PPB) was investigated. The proteins of different surface hydrophobicity, i.e. Bovine serum albumin (BSA), ${\beta}-lactoglobulin$, ovalbumin. moved to the PPB-rich bottom phase in a PEG(12%)/PPB (12%) two-phase system resulting in very low partition coefficients. When the concentration of PPB increased to 15% level. the electric potential of bottom phase changed from +50 mV to zero and the partition coefficient tended to increase. The change In the molar ratio of $K_2HPO_4/KH_2PO_4$ in PPB from 1.43 to 9.55 caused the volume ratio of top to bottom phase $(V_t/V_b)$ to be decreased and protein partition coefficient increased. When the concentration of PPB was elevated from 14% to 26%, the $V_t/V_b$ decreased from 1.5 to 0.39 and the partition coefficient of proteins increased drastically; ${\beta}-lactoglobulin$ 74 fold. BSA 32 fold, ovalbumin 12 fold and lysozyme 5 fold.

• Journal of Radiation Industry
• /
• v.4 no.1
• /
• pp.73-77
• /
• 2010

In recent day, there is much interest in the biocidal activity of silver since silver is known to be safe and effective as disinifectant and biocidal material against coliforms and viruses. In this study, hydrogels containing silver acetate as antibacterial agent have been prepared using gamma rays irradiation. The hydrogels are composed of poly(vinyl pyrrolidone) (PVP), poly(ethylene glycol) (PEG), carrageenan and silver acetate. The concentration of solution was 9 wt%. The ratio of PVP : PEG : carrageenan was 6 : 1 : 2. The concentration of the silver acetate were 0, 0.01, 0.03, 0.05 and 0.07% and Gamma irradiation dose was 25 kGy. The Gamma irradiation dose in hydrogels with 0.01% silver acetate were 20 kGy, 35 kGy, 50 kGy, 65 kGy, and 80 kGy. The results showed that 0.01% silver acetate concentration of hydrogels by 25 kGy irradiation dose showed the highest antibacterial activity against E. coli and Staphylococcus aureus. Moreover, antibacterial activity of various Gamma irradiation dose in hydrogels treated 0.01% silver acetate showed highest 35 kGy irradiation dose against Staphylococcus aureus.