• Journal of the Korean Solar Energy Society
• /
• v.32 no.2
• /
• pp.95-104
• /
• 2012

This study purposed to predict wind energy for small size wind power generators at 50m above the ground in each area using mean wind speed data for 10 minutes collected from 2001 to 2011 by meteorological data in large cities having over 60% of 15 story (50m) or higher apartments including Seoul, Daejeon, Gwangju and Daegu representing the inland region, and Busan, Incheon and Ulsan representing the coastal region. In the results of analysis, we confirmed close agree ment between observatory weather data and probability density distribution obtained using Weibull's parameters, and this suggests that Weibull's parameter is applicable to the estimation of wind energy. Hourly output energy using the mean wind speed for 10 minutes and output energy obtained from Weibull's parameter showed an error less than 5%, and thus it was found that wind energy can be evaluated using Weibull's modulus.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.19 no.3
• /
• pp.130-139
• /
• 2017

The crop damage caused by strong wind was predicted using the wind speed data available from Korean Meteorological Administration (KMA). Wind speed data measured at 19 automatic weather stations in 2012 were compared with wind data available from the KMA's digital forecast. Linear regression equations were derived using the maximum value of wind speed measurements for the three-hour period prior to a given hour and the digital forecasts at the three-hour interval. Estimates of daily maximum wind speed were obtained from the regression equation finding the greatest value among the maximum wind speed at the three-hour interval. The estimation error for the daily maximum wind speed was expressed using normal distribution and Weibull distribution probability density function. The daily maximum wind speed was compared with the critical wind speed that could cause crop damage to determine the level of stages for wind damage, e.g., "watch" or "warning." Spatial interpolation of the regression coefficient for the maximum wind speed, the standard deviation of the estimation error at the automated weather stations, the parameters of Weibull distribution was performed. These interpolated values at the four synoptic weather stations including Suncheon, Namwon, Imsil, and Jangsu were used to estimate the daily maximum wind speed in 2012. The wind damage risk was determined using the critical wind speed of 10m/s under the assumption that the fruit of a pear variety Mansamgil would begin to drop at 10 m/s. The results indicated that the Weibull distribution was more effective than the normal distribution for the estimation error probability distribution for assessing wind damage risk.

• Journal of Korea Society of Industrial Information Systems
• /
• v.4 no.2
• /
• pp.51-56
• /
• 1999

In this paper, we study the estimation of system reliability for the parallel system based on Spurrier and Weier 〔9〕 bivariate Weibull distribution. We assume that when one component fails, the workload of the remaining component becomes proportional to ψλ, where ψ〉0. We obtain the maximum likelihood estimators for the parameters of system reliability, and by using the numerical method, study the effects of reliability for the parallel system.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 1997.11a
• /
• pp.521-533
• /
• 1997

와이블분포에서 척도모수와 형상모수를 베이지안 방법을 이용하여 추정한다. 깁스표본법을 사용하여 모수들에 대한 추정, 결합사후확률분포 와 주변사후확률분포를 구한다. 9개의 열 전달기기자료와 10개의 인위적인 자료를 이용하여 제안된 방법을 적용하여 사례를 연구한다.

• Communications for Statistical Applications and Methods
• /
• v.24 no.4
• /
• pp.325-337
• /
• 2017

In this paper, we proposed a new long-term lifetime distribution with four parameters inserted in a risk competitive scenario with decreasing, increasing and unimodal hazard rate functions, namely the Weibull-Poisson long-term distribution. This new distribution arises from a scenario of competitive latent risk, in which the lifetime associated to the particular risk is not observable, and where only the minimum lifetime value among all risks is noticed in a long-term context. However, it can also be used in any other situation as long as it fits the data well. The Weibull-Poisson long-term distribution is presented as a particular case for the new exponential-Poisson long-term distribution and Weibull long-term distribution. The properties of the proposed distribution were discussed, including its probability density, survival and hazard functions and explicit algebraic formulas for its order statistics. Assuming censored data, we considered the maximum likelihood approach for parameter estimation. For different parameter settings, sample sizes, and censoring percentages various simulation studies were performed to study the mean square error of the maximum likelihood estimative, and compare the performance of the model proposed with the particular cases. The selection criteria Akaike information criterion, Bayesian information criterion, and likelihood ratio test were used for the model selection. The relevance of the approach was illustrated on two real datasets of where the new model was compared with its particular cases observing its potential and competitiveness.

• Journal of Korean Society for Quality Management
• /
• v.9 no.1
• /
• pp.3-11
• /
• 1981

A stress-strength model is formulated for s of k systems consisting of identical components. We consider minimum variance unbiased (MVU) estimation of system reliability for data consisting of a random sample from the stress distribution and one from the strength distribution when the two distirubtions are Weibull with unknown scale parameters and same known shape parameter. The asymptotic distribution of MVU estimate of system reliability in the model is obtained by using the standard asymptotic properties of the maximum likelihood estimate of system reliability and establishing their equivalence. Uniformly most accurate unbiased confidence intervals are also obtained for system reliability. Empirical comparison of the two estimates for small samples is studies by Monte Carlo simulation.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.05a
• /
• pp.311-314
• /
• 2003

Concrete structures such as bridge, pavement, airfield, and offshore structure are normally subjected to repeated load. This paper proposes a failure probability models of concrete subjected to split tension repeated-loads, based on experimental results. The fatigue tests were performed at the stress ratio of 0.1, the loading shape of sine, the frequency of 20Hz, and the stress levels of 90, 80 and 70%. The fatigue test specimen was 150mm in diameter and 75mm in thickness. The fatigue analysis did not include which exceeded 0.9 of statistical coefficient of determination values or did not failure at 2$\times$$10^6$ cycles. The graphical method, the moment method, and maximum likelihood estimation method were used to obtain Weibull distribution parameters. The goodness-of-fit test by Kolmogorov-Smirnov test was acceptable 5% level of significance. As a result, the proposed failure probability model based on the two-parameter($\alpha and \mu$) Weibull distribution was good enough to estimate accurately the fatigue life subjected to tension mode.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.2
• /
• pp.112-118
• /
• 2014

The depth effect on bending strength of Japanese larch structural lumber was investigated by using the published data of two different depth lumbers with the same length. Depth effect parameters were derived from Weibull's weakest link theory and compared to the results from other researches. Depth effect on bending strength was significant for No.1 and No.3 lumber, but not insignificant for No.2 lumber. Calculated value of the depth effect adjustment factors was 0.21, 0.11 and 0.22 by lumber grade, respectively. These results were similar to those results from previous researches and supported depth effect on bending strength of lumber. An apparent depth adjustment factor has been proposed to 0.2 in the literatures. Based on this study, depth adjustment factor was considered to 0.2 as a conservative optimum design value that should be incorporated in domestic building code (KBC) for structural lumber.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.3C no.1
• /
• pp.1-4
• /
• 2003

This paper presents an attempt to develop probabilistic multistress life models to evaluate the lifetime characteristics of epoxy-encapsulated magnet wire with heavy build polyurethane enamel. A set of accelerated life tests were conducted over a wide range of pulsating voltages, temperatures, and frequencies. Samples of fine gauge twisted pairs of the encapsulated magnet wire were tested us-ing a pulse endurance dielectric test system. An electrical-thermal lifetime function was combined with the Weibull distribution of lifetimes. The parameters of the combined Weibull-electrical-thermal model were estimated using maximum likelihood estimation. Likewise, a generalized electrical-thermal-frequency life model was also developed. The parameters of this new model were estimated using multiple linear regression technique. It was found in this paper that lifetime estimates of the two proposed probabilistic multistress life models are good enough. This suggests the suitability of using the general electrical-thermal-frequency model to estimate the lifetime of the encapsulated magnet wire over a wide range of voltages, temperatures and pulsating frequencies.

• Transactions on Electrical and Electronic Materials
• /
• v.7 no.5
• /
• pp.217-223
• /
• 2006

When only partial information is available about equipment failures (installation date and amount, as well as failure and replacement rates), data on sufficiently large number of yearly populations of the components can be combined, and estimation of model parameters may be possible. The parametric models may then be used for forecasting of the system's short term future failure and for formulation of replacement strategies. We employ the Weibull distribution and show how we estimate its parameters from past failure data. Using Monte Carlo simulations, it is possible to assess confidence ranges of the forecasted component performance data.