• 한국지능시스템학회논문지
• /
• 제16권2호
• /
• pp.234-239
• /
• 2006

In this paper, we propose an interacting multiple model (IMM) method using intelligent tracking filter with fuzzy gain to reduce tracking errors for maneuvering targets. In the proposed filter, the unknown acceleration input for each sub-model is determined by mismatches between the modelled target dynamics and the actual target dynamics. After a acceleration input is detected, the state estimates for each sub-filter are modified. To modify the accurate estimation, we propose the fuzzy gain based on the relation between the filter residual and its variation. To optimize each fuzzy system, we utilize the genetic algorithm (GA). The tracking performance of the proposed method is compared with those of the adaptive interacting multiple model(AIMM) method and input estimation (IE) method through computer simulations.

• Journal of Astronomy and Space Sciences
• /
• 제29권4호
• /
• pp.363-374
• /
• 2012

This paper studies the problem of tracking a re-entry vehicle (RV) in order to predict its impact point on the ground. Re-entry target dynamics combined with super-high speed has a complex non-linearity due to ballistic coefficient variations. However, it is difficult to construct a database for the ballistic coefficient of a unknown vehicle for a wide range of variations, thus the reliability of target tracking performance cannot be guaranteed if accurate ballistic coefficient estimation is not achieved. Various techniques for ballistic coefficient estimation have been previously proposed, but limitations exist for the estimation of non-linear parts accurately without obtaining prior information. In this paper we propose the ballistic coefficient ${\beta}$ model-based interacting multiple model-extended Kalman filter (${\beta}$-IMM-EKF) for precise tracking of an RV. To evaluate the performance, other ballistic coefficient model based filters, which are gamma augmented filter, gamma bootstrapped filter were compared and assessed with the proposed ${\beta}$-IMM-EKF for precise tracking of an RV.

• 한국산학기술학회논문지
• /
• 제18권5호
• /
• pp.99-110
• /
• 2017

레이다를 이용한 다수 표적의 상태 추정을 통해 추적 성능을 향상시키는 문제는 중요하다. 클러터 환경에서 추적 필터를 이용하여 다수 표적 추적 시 트랙과 측정치 간의 결합사건이 발생하며 개수가 증가함에 따라 결합사건은 기하급수적으로 증가한다. 이러한 환경에서 다수 표적 추적 필터 설계 시 고려해야할 문제는 첫째, 신속한 거짓트랙 제거 및 표적트랙 확정을 통하여 오경보율 최소화하고, 이를 통해 FTD(False Track Discrimination) 성능을 높인다. 둘째, 다수의 트랙이 측정치를 공유하는 결합사건 발생시 효율적으로 각각의 측정치를 트랙에 할당함으로써 트랙 유지성능을 향상시키는 것이다. 두 가지 고려사항을 통해 단일 표적 추적 자료결합 기법을 다수 표적 추적 필터로 확장하여 사용하며, 대표적인 알고리듬으로 JIPDAF(Joint Integrated Probabilistic Data Association Filter)와 LM-IPDAF(Linear Multi-target IPDAF)가 있다. 본 논문에서는 측정치 할당 시 생기는 수 많은 가설들에 대한 확률적 평가를 하지 않음으로써 측정치와 트랙의 개수에 따라 비선형으로 연산량이 증가하지 않으며, 클러터밀도 추정을 통해 트랙을 쇄신하는 트랙존재확률 기반의 LM-IPDAF 알고리듬을 소개한다. 그리고 LM-IPDAF의 트랙존재확률 산출 시 필요한 클러터밀도 추정 방법을 개선함으로써 연산량을 효과적으로 감소시킬 수 있는 방법을 제안하고 시뮬레이션을 통해 기존의 알고리듬과 비교, 분석하여 성능을 검증하였다. 그 결과, 위치 RMSE, Confirmed True Track 측면에서는 동일한 성능을 내면서 시뮬레이션 처리 시간을 약 20% 감소시킬 수 있었다.

• International Journal of Control, Automation, and Systems
• /
• 제6권1호
• /
• pp.44-53
• /
• 2008

An interacting multiple model (IMM) estimation algorithm based on the mixing of the predicted state estimates is proposed in this paper for a right continuous jump-linear system model different from the left-continuous system model used to develop the existing IMM algorithm. The difference lies in the modeling of the mode switching time. Performance of the proposed algorithm is compared numerically with that of the existing IMM algorithm for noisy system identification. Based on the numerical analysis, the proposed algorithm is applied to target tracking with a large sampling period for performance comparison with the existing IMM.

• 제어로봇시스템학회논문지
• /
• 제21권9호
• /
• pp.843-848
• /
• 2015

In this paper, The ARR-TSE (Automatic Range Restore - Triangulation based target Size Estimator) algorithm is presented for IIR (Imaging Infrared) seeker. The target size is important information for the IIR target tracking. The TSE (Triangulation based target Size Estimator) algorithm has suitable performance to estimate target size for static IIR target. but, the performance of the algorithm can be decreased by noise. In order to decrease influence of noise, we propose the ARR-TSE algorithm. The performance of proposed method is tested at target intercept scenario. The simulation results show that the proposed algorithm has the accurate target size estimating performance.

• 대한기계학회논문집A
• /
• 제29권1호
• /
• pp.139-144
• /
• 2005

A vehicle cruise control algorithm using an Interacting Multiple Model (IMM)-based Multi-Target Tracking (MTT) method has been presented in this paper. The vehicle cruise control algorithm consists of three parts; track estimator using IMM-Probabilistic Data Association Filter (PDAF), a primary target vehicle determination algorithm and a single-target adaptive cruise control algorithm. Three motion models; uniform motion, lane-change motion and acceleration motion. have been adopted to distinguish large lateral motions from longitudinal motions. The models have been validated using simulated and experimental data. The improvement in the state estimation performance when using three models is verified in target tracking simulations. The performance and safety benefits of a multi-model-based MTT-ACC system is investigated via simulations using real driving radar sensor data. These simulations show system response that is more realistic and reflective of actual human driving behavior.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1278-1282
• /
• 2003

A new interacting multiple model (IMM) method using intelligent input estimation (IIE) is proposed to track a maneuvering target. In the proposed method, the acceleration level for each sub-model is determined by IIE-the estimation of the unknown acceleration input by a fuzzy system using the relation between maneuvering filter residual and non-maneuvering one. The genetic algorithm (GA) is utilized to optimize a fuzzy system for a sub-model within a fixed range of acceleration input. Then, multiple models are composed of these fuzzy systems, which are optimized for different ranges of acceleration input. In computer simulation for an incoming ballistic missile, the tracking performance of the proposed method is compared with those of the input estimation (IE) technique and the adaptive interacting multiple model (AIMM) method.

• 제어로봇시스템학회논문지
• /
• 제7권5호
• /
• pp.445-453
• /
• 2001

The multiple targets tracking problem has been one of the main issues in the radar applications area in the last decade. Besides the standard Kalman filtering, various methods including the variable dimen-sion filter, input estimation filter, interacting multiple model(IMM) filter, dederated variable dimension filter with input estimation, etc., have proposed to address the tracking and sensor fusion issues. In this pa- per, two existing tracking algorithm, i.e, the IMM filter and the variable dimension filter with input estima-tion(VDIE), are combined for the purpose of improving the tracking performance for maneuvering targets. To evaluate the tracking performance of the proposed algorithm, three typical maneuvering patterns, i.e., waver, pop-up, and high-diver motions, are defined and are applied to the modified IMM filter as well as the standard IMM filter. The smaller RMS tracking errors, in position and velocity, of the modified IMM filter than the standard IMM filter are demonstrated though computer simulations.

• 대한전기학회논문지
• /
• 제45권1호
• /
• pp.139-145
• /
• 1996

The input estimation method estimates maneuvering input acceleration in order to track a maneuvering target. In this paper, the optimal input estimator is derived by choosing the MAP hypothesis among maneuvering input transition hypotheses under the assumption that a maneuvering input acceleration is a semi-Markov process. The optimal input estimation method cannot be realized because the optimal filter should consider every maneuver onset time hypothesis from filter starting time to current time which increase rapidly. Hence the suboptimal filter using a sliding window is proposed. Since the proposed method can consider all hypotheses of input transitions inside the window, it is general enough to include Bogler's input estimation method. Simulation results show, however, that we can obtain a good performance even when the filter considering just one input transition in the window is used. (author). 9 refs., 3 figs., 1 tab.

• 전기학회논문지
• /
• 제67권2호
• /
• pp.314-324
• /
• 2018

This paper proposes a linear distributed target tracking filter for multiple unmanned aerial vehicles(UAVs) sharing their passive sensor measurements through communication channels. Different from the conventional nonlinear filtering schemes, the distributed passive target tracking problem is newly formulated within the framework of a linear robust state estimation theory incorporated with a linear uncertain measurement equation including the coordinate transform uncertainty. To effectively cope with the performance degradation due to the coordinate transform uncertainty, a linear consistent robust Kalman filter(CRKF) theory is devised and applied for designing a distributed passive target tracking filter. Through the simulations for typical UAV surveillance mission, the superior performance of the proposed method over the existing schemes of distributed passive target tracking are demonstrated.