• 국제학술발표논문집
• /
• The 6th International Conference on Construction Engineering and Project Management
• /
• pp.101-103
• /
• 2015

Scientific methods that measure the physical demand requirements of a construction operation have not been arrived at maturity in construction community. It is attributed to the difficulty involved in performing controlled experiments on the operation and its' volatile jobsite environment. This paper presents a method that measures the physical demand requirement of the waterproofing activity and verifies the differences between various operations (e.g., a primer painting and a polyurethane coating) consisting of the activity. Two hypotheses, which are involved in the operations, are summarized as follows: [Hypothesis 1] when one performs the same amount of work; the one's average heart rate required for the polyurethane coating operation is higher than that required for the primer painting operation. [Hypothesis 2] when one performs the same amount of work, the one's break time required for the polyurethane coating operation is longer than that required for the primer painting operation.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 1998년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.138-148
• /
• 1998

The aim of the work described in this paper is to develop a complex underground acoustic system which detects and localizes the origin of an underground hammering sound using an array of hydrophones located about loom underground. Three different methods for the sound localization will be presented, a time-delay method, a power-attenuation method and a hybrid method. In the time-delay method, the cross correlation of the signals received from the way of sensors is used to calculate the time delays between those signals. In the power-attenuation method, the powers of the received signals provide a measure of the distances of the source from the sensors. A new hybrid method has been developed for estimating the origin of the underground acoustic source by coupling both methods. The Nelder-Meade simplex search algorithm is then used to numerically estimate the position of the source in those methods. For each method the sound localization is carried out in three dimensions underground. The distance between the true and estimated origins of the source is in some cases less than 6m for a search area of radius 250m.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 추계 학술논문 발표대회
• /
• pp.81-82
• /
• 2019

In this study, the Proctor penetration resistance test value and the hardness value of the improved Durometer were compared and analyzed for the change in the FA replacement rate of the concrete using CGS fine aggregate. The results are summarized as follows. It is. 1) The Proctor penetration resistance test value and the hardness value of the improved Durometer showed a high correlation in the form of a curve. 2) About surface finish Super-resolution with the improved Durometer is considered to be useful when using about 50 HD and about 80 HD in the end to determine the surface finishing work time.

• 한국산업보건학회지
• /
• 제18권3호
• /
• pp.204-215
• /
• 2008

Many researches for service-life of chemical cartridges of respirators have been performed in many countries. On the result of these researches a few softwares programs were eventually developed to be used. In spite of that, it is difficult to apply these researches and softwares practically in the work spot because of too many factors that influence on service-life of chemical cartridges. This study was the first of two conducted for the purpose of developing program for estimating exchange period or service-life of chemical cartridges available feasibly in the workplaces. Collecting plan of cartridges discarded after use is in principle that three cartridges from three workers at a time, three steps of 1/2 exchange time due to smelling, just routine exchange time and 1.2 to 1.3 expanded time of routine exchange, total nine cartridges are collected in the same job site. 33 cartridges for organic vapor were collected in paint spray process of ship yard and paint factory, and 6 cartridges for acid were collected in plating process. These cartridges were analysed the remaining breakthrough time in 3M Innovation Center. Challenge vapor and breakthrough concentration were complied with Korean regulation for chemical cartridge respirators. Estimated breakthrough time was determined from previously used time plus breakthrough time for the remaining. Exchange period of cartridge would be the shortest time among three estimated breakthrough times. On the result breakthrough time for organic vapor was found to be relatively easily estimated, but that for acid aerosol or vapor was difficult to be confident. Even though this method was difficult to be precisely predicted exchange period of cartridge, it could be an alternative program practically available in the job site.

• Journal of the Korean Data and Information Science Society
• /
• 제20권2호
• /
• pp.411-423
• /
• 2009

본 논문은 삼각 분할표 자료의 예측문제에 있어 Verrall (1990)의 발생연도효과와 경과년도효과만 있는 베이지안 선형모형을 절대연도효과가 있는 모형으로 확장한 모형을 제시하고 이에 대한 추정 방법으로 마르코프 연쇄 몬테칼로 방법을 제안한다. 제안된 모형과 추정 방법은 세 가지 실제 예를 통하여 기존의 방법들에 비해서 일반적으로 작은 상대 예측오차를 제공함을 보였다.

• 한국건설순환자원학회논문집
• /
• 제7권4호
• /
• pp.358-366
• /
• 2019

본 연구는 현재 작업자의 경험과 감각에만 의존하고있는 표면 마감작업시간 판정을 Durometer 측정치와 Proctor 관입저항 시험치를 비교하여 응결시간 판정에 듀로미터를 활용함으로써 실무 구조체의 과학적이고 정량적인 표면 마감시간의 추정 가능성을 분석하고자 하였다. 연구 결과로 Durometer 측정치와 Proctor 관입저항 시험치는 상관성이 높다고 판단되어 콘크리트의 경우 초결 측정시에는 Durometer C type으로 42HD전후 일 때 표면 마감작업 개시가능 시간결정에, 종결 측정시에는 Durometer D type으로 10HD 전후일때 표면마감 한계시간, 양생개시 시간 등에 유용하게 사용할 수 있을 것으로 사료되었다.

• 한국농공학회논문집
• /
• 제52권2호
• /
• pp.27-34
• /
• 2010

The PERT is one form of probabilistic network and can have many critical paths in the concept of each work has dispersed complete time. Here we propose two operators to estimate the probabilistic complete time about serial and parallel connections, and in each junction node, probability of critical path is estimated by new operator. Then we compare the estimated results with robability of critical path with deterministic CPM and Monte Carlo simulation (MCS). Our results show that all paths in PERT can be critical path, and proposed operators are efficient and accurate probabilistic calculators compare MCS result.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 춘계 학술논문 발표대회
• /
• pp.196-197
• /
• 2014

Low carbon construction is an important operation management goal such as cost, time, and quality in construction community. This paper introduces a system which measures the variability of carbon dioxide amounts. First, this system allows creating construction operation models of which the level of detail is breakdown into the work task level. Second, the system implements sensitivity analysis along with a ranges of resources that are allocated in an operation model. It facilitates to find the optimal resource combination using the operation performances such as the amount of emissions, operation completion time, and cost. Lastly, it identifies the best fit probability distribution functions of performance criteria given a certain resource combination. It allows project manager to query the percentages to complete the operation within a limitation specified by the system users.

• Journal of Information Display
• /
• 제13권3호
• /
• pp.125-130
• /
• 2012

In this paper, a new precharging method without any side effects is proposed to overcome image degradation caused by insufficient charging times. This work explains why the precharging method can compensate for short charging times. However, side effects of the precharging method in the form of horizontal line artifacts are addressed, wherein line artifact-compensating precharging (LCP) is presented to mitigate the side effects. Behavioral modeling is employed to investigate the side effects by estimating transient responses of a liquid crystal display. The LCP proves that it can dramatically reduce line artifacts caused by precharging because the brightness difference of adjacent pixels does not exceed 1.0.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 추계 학술논문 발표대회
• /
• pp.116-117
• /
• 2019

In this research, Proctor insertion resistance test values and Durometer A type hardness values were compared and analyzed between the setting times of the concrete using CGS for Fine Aggregate, and the results are summarized as follows. 1) The Proctor penetration resistance test value and the hardness value of Durometer A type showed a high correlation in the form of a curve. 2) About surface finish The resolution exceeding the hardness value of the Durometer A type uses about 25 HD, and in the case of termination, about 35 HD, and is considered to be effective for determining the surface finishing work time. The possibility to do is expected.