• Korean Journal of Community Nutrition
• /
• v.20 no.2
• /
• pp.87-95
• /
• 2015

Objectives: Maintaining a balanced diet and thus health is crucial for adolescents, and the first step for balanced diet practice is meal planning. Adolescents, however, find it difficult to plan their meals. This study thus was set out to design an easier way of planning meals for adolescent girls. Methods: A dish-based target pattern for adolescent girls was tabulated, and validity of this was examined. Meal plan applying a dish-based target pattern was prepared by 150 female middle school students, and nutritional adequacies of those meal plans were examined. Validity and adequacy were tested by energy content, energy contribution ratio, nutrient adequacy ratio (NAR), probability of nutrient inadequacy, index of nutritional quality (INQ) calculation. Results: A dish-based target pattern with 11 dish groups was validated for nutritional adequacy. Though the NAR of calcium was 0.96, the INQ of calcium was 1.00. The average energy supply from the meal plans was 2,379 kcal, higher than the estimated energy requirement of a female middle school student, but the energy contribution ratio of carbohydrates, proteins, and fats were all adequate according to the acceptable macronutrient distribution range (AMDR). NAR of all nutrients examined were 1.0, except for calcium. The NAR and INQ of calcium were 0.87 and 0.75, respectively, and the meal plans at risk for calcium inadequacy was 19.30%. Conclusions: A dish-based target pattern proposed for adolescent girls was valid, but the meal plan prepared by female middle school students using this approach was high in energy and low in calcium supply. To cut down the energy supply from the meal plan, it is necessary to recommend dishes low in fat and use low fat cooking methods. To increase the calcium supply, it is important to recommend seaweed and legume group dishes with higher Ca INQ food items.

• Journal of Animal Science and Technology
• /
• v.45 no.1
• /
• pp.113-122
• /
• 2003

Net and metabolizable energy requirements for maintenance of Hanwoo (Korean native cattle) bulls were estimated in twenty-eight fasting metabolism trials using seven different feeds at four stages of body weight(100, 200, 300 and 400kg). Three cattle for each of twenty-eight trials fed at a level of maintenance energy requirement were housed in metabolic stalls during the 5 days of collection period. Thereafter, during the 2 days of respiration period the heat production was measured by indirect calorimetry using respiratory chamber. After finishing the respiratory metabolism trials under the maintenance level, experimental animals were fasted for 5 days and were measured heat production by indirect calorimetry using respiratory chamber. Seven different feeds were: 1) mixed ration of concentrate and rice straw, 2) mixed ration of concentrate and mixed grass hay, 3) mixed ration of concentrate and corn silage, 4) rice straw alone, 5) mixed grass hay alone, 6) corn silage alone, 7) concentrate alone. Fasting heat production were 66.05/$W^{0.75}$ at 100kg of body weight and 60~63kcal/$W^{0.75}$ at 200~400kg of body weight. When subtracting heat loss by muscular work from the fasting heat production, basal metabolic rate was 55.92kcal/$W^{0.75}$. The average values of NEm requirements were obtained by adding urinary energy excretion to the basal metabolic rates were 69.1, 62.1, 65.8 and 64.4kcal/$W^{0.75}$ for the four stages of body weight, respectively. The ME requirement for maintenance could be calculated using retained energy and the efficiency of utilization of ME for net energy. The ME requirement for maintenance thus obtained was 102.69kcal/$W^{0.75}$.

• Asian-Australasian Journal of Animal Sciences
• /
• v.6 no.2
• /
• pp.275-279
• /
• 1993

A study using dairy heifers was conducted to determine the effect of environmental temperature on heat production differing in feed intake level. The design consisted of three levels of feed intake (low, medium and high) and two environmental chamber temperature (15 and $30^{\circ}C$) with four replications in each treatment. Rectal temperature (RT), respiration rate (RR), heart rate (HR) and heat production (HP) were then measured. At the both environmental temperature, RT, RR and HR increased with the increase in feed intake level. The RT and RR also increased with the elevation of environmental temperature. The HP of $30^{\circ}C$ was significantly higher (4.8-8.9%) than $15^{\circ}C$. The estimated metabolizable energy requirement for maintenance (MEm) was higher (p<0.05) at $30^{\circ}C$ ($554.7kJ/kg^{0.75}$ d) than $15^{\circ}C$ (464.9 kJ/kgd). It was suggested that the decreasing in productive efficiency under hot environmental conditions partly associated with the increase in HP, which associated with the change in heat loss mechanism from sensible path to evaporative path.

• The Korean Journal of Food And Nutrition
• /
• v.31 no.1
• /
• pp.33-42
• /
• 2018

The aim of this study was to examine the association between egg consumption and the risk of chronic disease in Korean adult females using the 2013 Korea National Health and Nutrition Examination Survey. A total of 1,230 subjects aged 40~64 were classified into the 4 groups according to the number of egg consumed per week: <1, 1~2.9, 3~5, ${\geq}5.1$ As egg consumption increased, the intake of energy, protein, fiber, cholesterol, calcium, potassium, riboflavin, and vitamin C increased. The percentage of the subjects with lower intake of energy, protein, calcium, iron, vitamin A, riboflavin, niacin, and vitamin C than the estimated average requirement in the <1 group were the highest among the groups. The blood lipid profile including total cholesterol and LDL-cholesterol was not significantly different among the 4 egg groups. The higher egg consumption was inversely related to a lower odds ratio of metabolic syndrome, hypertriglycemia, hyperglycemia, hypoHDL-cholesterolemia, and hypertension. This result indicates that egg consumption does not elevate the plasma cholesterol level and has a beneficial effect of decreasing the risk of chronic disease. (175)

• Journal of the Korean Society of Food Culture
• /
• v.22 no.6
• /
• pp.841-847
• /
• 2007

This study was conducted to investigate on bone density and nutrient intake of university students in Seoul area. Nutrient intake data were obtained by using the 24-hour recall method to evaluate the usual diet of the subjects. BQI(bone quality index) of the subjects was measured by an Quantitative Ultrasound (QUS). The results are summarized as follows: The average height, weight, BMI of the male and female student were 173.3 cm, 68.5 kg, 22.7; 161.4 cm, 54.2 kg, 20.8, respectively. The BQI and Z-score of the subjects were 99.50, -0.69 in male student group, and 82.6, -1.15 in female student group, respectively. Normal, osteopenia and osteoporosis percentage by bone status were 73.8%, 24.9%, 1.3% in male student group, and 39.8%, 57.6%, 2.6% in female student group, respectively. Energy intake of male and female group were 71.7%, 79.1% of EER(estimated energy requirement) respectively. Fiber, Ca, Vit $B_2$, niacin, folic acid, Vit C intake were less than RI(recommended intake) and protein, phosphorus intake were higher than RI in subjects. Nutrient intake were not significantly related with BQI in male and female groups generally.

• Journal of Nutrition and Health
• /
• v.54 no.2
• /
• pp.129-138
• /
• 2021

To set the estimated energy requirement (EER) in Dietary Reference Intakes for Koreans (KDRI), we need the coefficient by physical activity stage, as determined by the physical activity level(PAL). Thus, there has been demand for a tool to calculate PAL based on the physical activity diary. This study was undertaken to develop a physical activity (PA) classification table for Koreans, using the 2011 Compendium of physical activities in the United States. The PA classification table for Koreans contains 262 codes, and values of the metabolic equivalent of task (MET) for specific activities. Of these, 243 PAs which do not have Korean specific data or information, were selected from the 2011 Compendium of PAs that originated in the United States; another 19 PAs were selected from the previous research data of Koreans. The PA classification table is codified to facilitate the selection of energy values corresponding to each PA. The code for each PA consists of a single letter alphabet (activity category) and four numeric codes that display the activity type (2 digit number), activity intensity (1 digit number), and specific activities (1 digit number). In addition, the intensity (sedentary behavior, low, middle and high) of specific PA and its rate of energy expenditure in MET are presented together. The activity categories are divided into 4 areas: Daily Activity (A), Movement (B), Occupation (C), and Exercise and Sports (D). The developed PA classification table can be applied to quantify the energy cost of PA for adults in research or practice, and to assess energy expenditure and physical activity levels based on self-reported PA.

• Asian-Australasian Journal of Animal Sciences
• /
• v.10 no.5
• /
• pp.445-454
• /
• 1997

Rice bran commonly available in Bangladesh is a mixture of rice hulls (60%), bran (35%) and polishing (5%), referred here as rice mill feed (RMF). Dose response effect of RMF supplementation to a straw diet including a zero level was measured on the intake, digestibility, nitrogen balance, microbial N yield and growth rate of growing native (Bos indicus) bulls. Twelve bulls of 33 months old and $272{\pm}31.5kg$ weight were randomly allocated to diets having 0 (T1), 1 (T2) and 2 (T3) kg RMF in addition to 200 g wheat bran, 200 g molasses, 60 g salt and 30 g oyestershe\l powder. Concentrate intake was 5.5, 19.2 and 29.5% of the dietary intake for the T1, T2 and T3 treatment respectively. RMF supplementation had no significant effect on the straw DM intake. However, with the increasing levels of RMF supplementation, total DM & digestible OM intake and the whole gut digestibilities of DM, OM, N & ADF increased but in deminishig return. Total microbial N yield estimated from the urinary purine excretion were 15.35, 26.56 and 38.44 g/d for the treatment T1, T2 and T3 respectively. Both the N intake and the N balance increased linearly in response to increasing level of RMF. Supplementation of RMF linearly increased the energy intake and dietary energy concentration. Growth rate in the T1, T2 and T3 treatments were 112, 125 and 250 g/d respctively. The basal N excretion and the maintenance energy requirement of the experimental animals were estimated to be 615 mg/kg $W^{0.75}/d$ and 447 kJ/kg $W^{0.75}/d$ respectively. The estimated efficiency on N utilization was 0.83 mg/mg of N intake ($r^2=0.997$) while the efficiency of metabolizable energy utilization for growth was 0.15. Since animal refused higher levels of RMF, inclusion up to 2 kg level (about 25% of the total DM intake) appears to have no depressing effect on the performances of animal. However, RMF itself fail to meet the critical nutrient need of the rumen microbes. Therefore response of supplementing RMF after correcting the critical nutrient deficiency need to be studied.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.5
• /
• pp.605-612
• /
• 2000

Four young swamp buffalo cows of similar age ranging in weight between 280 to 380 kg and trained to do physical work were used in a study to determine energy and protein requirements for draught using a $4{\times}4$ Latin square designed experiment. The experiment consisted of field trials employing 4 levels of work load, e.g. no work as control, and loads amounting 450 to 500 Newton (N) pulled continuously for 1, 2 and 3 h daily for 14 consecutive days. Cows were fed king grass (Penisetum purpuroides) ad libitum and were subjected to materials balance trials. Body composition was estimated in vivo by the body density method and daily energy expenditure (EE) was calculated from ME minus retained energy (RE). The results show that EE while not working ($EE_{resting}$) was $0.42kgW^{0.75}MJ/d$ and maintenance ME ($ME_m$) was $0.37kgW^{0.75}MJ/d$. ME requirement increased to 1.65 times maintenance for the work of 3 hours. The energy expended for doing exercise ($E_{exercise}$) was 9.56, 20.0 and 25.86 MJ/cow for treatments 1, 2 and 3 II, respectively. Fat retention was absent in all groups of working cows, but protein retention was only negative for cows undertaking 3 h work. The relationship between $E_{exercise}$ (MJ), work load (F, kN), work duration (t, h) and body mass (W, kg) was found to be: $E_{exercise}=(0.003F^{1.43}t^{0.93})/W^{0.09}MJ$. The maintenance requirement for digestible protein was $2.51kgW^{0.75}g/d$, whereas digestible protein for growth ($DP_{growth}$) and for work ($DP_{work}$) followed the equations: $DP_{growth}=[(258+1.25W^{0.75}){\Delta}Wkg/d]g$ and $DP_{work}=[12.59e^{0.95t}]g$, respectively The coefficients a, b and c for the calculation of $E_{exercise}$ components according to the Lawrence equation were found to be 2.56 J/kgW.m, 5.2 J/kg load carried.m and 0.29, respectively, thus efficiencies to convert ME into work were 0, 16.09, 27.3 and 32.44% for control, 1, 2 and 3 h/d work, respectively. ME and DP requirements for a 250 to 400 kg working buffalo cow allowing to growth up to 0.5 kg/d are presented.

• Journal of Nutrition and Health
• /
• v.39 no.5
• /
• pp.451-459
• /
• 2006

The purpose of our study was to evaluate an association between milk consumption and bone mineral density (BMD) of female college students in Korea. The dietary data of 1,410 Korean college students living in the vicinity of Seoul area were collected through the Food Frequency Questionnaire. The mean age, height, weight and 8MI of the subjects were 20.4 years, 162.1 cm, 52.7 kg, and $20.0\;kg/m^2$ respectively. The mean intakes of energy, protein, and phosphorus were 2,398.7 kcal, 95.2 g, and 1,302.9 mg respectively, which were above their EER or Recommended Intake (RI), but the mean intake of calcium was 657.8 mg which was below its RI, and 44.0% of the subjects did not meet Estimated Average Requirement (EAR) of calcium. The daily milk consumption was 131.1 g, and the total consumption of milk and dairy product was 228.7 g. Forty five percent of the subjects consumed $50{\sim}200\;g$ of milk or dairy products. After the analysis of their dietary intakes, the subjects were divided into quintiles of total consumption of milk and dairy product, which were considered as major source of dietary calcium. Ninety two subjects from the upper quintile (UQ) and 85 subjects from the lower quintile (LQ) were selected and their bone mineral densities (BMD) of lumbar spine (L1-L4) and the femur were examined by the dual energy X-ray absorptiometry. The BMD $(g/cm^2)$of L1, L2, L3, and average of femur were 1.065, 1.150, 1.187, and 0.988 for the UQ subjects, which were significantly higher than those of the LQ subjects, 1.010, 1.090, 1.146, and 0.942 respectively. Moreover, the T-scores of the UQ were significantly higher than those of the LQ. The prevalence rates of osteopenia classified according to WHO's criterion were 12.0% in the UQ. and 20.0% in the LQ group which showed non significant. Blood levels of calcium, and phosphorus of UQ and LQ group were both within the normal range, and were not significantly different. Our results showed that UQ group presented the better status of bone mineral density and bone health. Therfore our results suggest that continuous consumption of more than one and a half cups of milk per day, which corresponds to the least amount of UQ group's consumption, would affect positively on the bone health of Korean adults.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2002.11a
• /
• pp.43-49
• /
• 2002

A7003 alloy has characteristics of their excellent weldability, high corrosion resistance and superior plastic working however the broadening of application for the alloy has been hampered by the lower extrudability associated by Mg content. For improvement of extrudability and enhanced recovery efficiency during Al scrap recyeling, it has been generally practiced to reduce Mg content in A7003 alloy. Therefore, it is necessary to investigate the influence of Mg content on mechanical strength and extrudability of A7003 alloy. For efficient material processing which has small amounts, life cycle assessment in material processing(MLCA) is evaluated. The quantitative analysis of energy requirements and $CO_2$ emission for production of A7003 extruded bar are estimated with different Mg content and billet pre-heating process (heating source by light oil or LPG). In particular, the estimation of energy requirements was performed within shipping and gating range (except the mining and extraction stages)to investigate the influence of the variables on energy requirements and $CO_2$ emission in detail. As Mg content increased, the flow stress and the extrusion pressure for A7003 alloy increased. It has been thought that an increment in extrusion pressure with increasing Mg content is caused by the solid solution hardening of Mg atoms in the matrix and increment in volume fraction of intermetallic compound, $Mg_2Si$. The extrudability and the tensile strength are equal to, or above that of conventional A 7003 alloy even the content of Mg varied from $1.1wt.\%\;to\;0.5wt.\%$ alloy. This means that minimizing the content of Mg in A7003 alloy can enhance recovery efficiency during Al scrap recycling. It can be quoted that rather than Mg content energy source for billet heating is a prime factor to determine the atmospheric $CO_2$ emission.