• Journal of Dental Rehabilitation and Applied Science
• /
• v.19 no.3
• /
• pp.247-256
• /
• 2003

The patient had bruxism and epilepsy tendency. Inadequate or unstable posterior support was identified due to severe anterior attrition and decreased occlusal vertical dimension. Prematurities of posterior occlusal and wear facets increased the function of anterior teeth, resulting in severe wear. Wear facets displayed sharply defined peripheries, which are matched on articulated diagnostic casts. Also the patient showed C III malocclusion tendency, and lost some facial contour with drooping corners on the mouth. In this case, the alteration of OVD (Occlusal Vertical Dimention) may provide a biologically compatible adjunct to the treatment such as dentofacial esthetics, improved visual proportion in facial heightand mechanical solutions to the force-management of the masticatory system. The patient requires extensive restorative treatment to regain appropriate function, esthetics and comfort. According to the report by Farhad Fays, the average vertical distance from the maxillary to the mandibular mucolabial reflection in the region of the central incisors is approximately 34mm. However, the vertical distance of this patient was found to be 32mm, which was necessary to add gauge 20-sheets to apply vertical dimension. A removable occlusal overlay splint, which restores OVD to the estimated optimalposition, is the general first trial. The patient was observed periodically for 6 weeks, while appropriate adjustments were made vertical dimension to function. When patient felt comfortable with the splint, the teeth were prepared, and provisional restorations are placed for 3 months. The provisional restoration was fabricated by a diagnostic wax-up. When the patient felt comfortable with the provisional restoration, the final restoration mimics OVD, function, and esthetics that have been developed in the treatment restorations. Restoration of the extremely worn dentition presents a substantial challenge to thedentists. Therefore, careful evaluation of the etiology, history, and factors associated with occlusal vertical dimension should be preceded prior to the appropriate treatment planning.

• Restorative Dentistry and Endodontics
• /
• v.41 no.3
• /
• pp.225-230
• /
• 2016

Enamel microabrasion has become accepted as a conservative, nonrestorative method of removing intrinsic and superficial dysmineralization defects from dental fluorosis, restoring esthetics with minimal loss of enamel. However, it can be difficult to determine if restoration is necessary in dental fluorosis, because the lesion depth is often not easily recognized. This case report presents a method for analysis of enamel hypoplasia that uses quantitative light-induced fluorescence (QLF) followed by a combination of enamel microabrasion with carbamide peroxide home bleaching. We describe the utility of QLF when selecting a conservative treatment plan and confirming treatment efficacy. In this case, the treatment plan was based on QLF analysis, and the selected combination treatment of microabrasion and bleaching had good results.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.12 no.2
• /
• pp.69-81
• /
• 1990

Classification of facial asymmetry has not been yet well-organized because of their variety on etiologic factors, involved sites and clinical expressions. And surgical treatments are also variable and depend upon their causes and clinical abnormalities. This is a case report on surgical experiences of two patients who had severe facial asymmetry and could not treated pre-surgical orthodontics before surgery. One patient was belong to hemifacial microsomia and another was a very unusual complex type related to unilateral condylar hyperplasia, unilateral macrognathia and unilateral mandibular hypoplasia. The authors used a simultaneous two-jaw surgery, bone shaving and onlay-type bone graft in former case, and a simultaneous two-jaw surgery, condylectomy, bone shaving and only-type bone graft in latter case. In two cases, immediate post-operative results in function and esthetics were excellent, however, progressive resorption of onlay-type bone grafts have been noticed.

• Archives of Craniofacial Surgery
• /
• v.25 no.5
• /
• pp.240-246
• /
• 2024

The severe gummy smile and a skeletal class II profile pose challenges in treatment. This case report outlines an effective alternative for addressing these problems in a patient with skeletal class II division 2, class II molar relationship, retroclination of upper incisors, and lip protrusion. Treatment objectives included normalizing the overjet and overbite, improving the gummy smile, and establishing a satisfactory occlusion. A three-dimensional simulation was performed to consult with the patient, assess possible results, and predict treatment biomechanics. The treatment involved the use of two zygomatic and one inter-radicular temporary anchorage devices, along with botulinum toxin. After the 2-year follow-up, a satisfactory dental occlusion, aesthetic improvement, and adequate function were achieved. This approach offers a viable alternative to orthognathic surgery for adults with skeletal class II malocclusion and a severe gummy smile due to hypermobile lip.

• Journal of Periodontal and Implant Science
• /
• v.36 no.4
• /
• pp.817-827
• /
• 2006

Purpose : This study was designed 1) to compare the perception of dental professionals and lay people with respect to minor variations in maxillary anterior tooth size and alignment and their relation to the surrounding soft tissues, and 2) to evaluate the normal tooth-gingiva topographical relationships in periodontally healthy young subjects, Materials and methods : Maxillary anterior teeth were intentionally diagrammed in varying degree of deviation with respect to one of three common anterior esthetic discrepancies including variations in crown length, shape of gingival margin, and length of interproximal contact, 17 images were generated to be preferentially selected by 2 groups consisting of dental professionals and lay people (total of 740). Smiling photographs of 120 dental students who had healthy periodontium were taken and the photographic images were analyzed to be classified as 17 kinds of altered image groups. Results : The results demonstrated noticeable difference between the varying levels of discrepancy. Both group preferred gingival margin of lateral incisor to be 0.5mm lower than that of central incisor. Lay people preferred the gingival margin shape that has 2/9 horizontal component of the crown width, while dental professionals preferred the gingival margin shape that has 1/9 horizontal component of the crown width. Lay people preferred longer length of the interproximal contact (two thirds of the crown length), whereas dental professionals preferred shorter length of the interproximal contact (half of the crown length). Photographic analysis of normal esthetic gingival topography revealed 2/9 horizontal component and short length of the interproximal contact which was of the hybrid nature of the preferences shared by lay people and dental professionals. Conclusion: The results of this study show that dental professionals and lay people demonstrated significant difference in their preference of dental esthetic components, which may then influence the decision making process by dental professionals with respect to designing the anterior esthetic gingival line.

• The korean journal of orthodontics
• /
• v.47 no.1
• /
• pp.31-38
• /
• 2017

Objective: This study aimed to quantitatively assess the relationship of smile esthetic variables with various types of malocclusion, and identify the cephalometric factors affecting smile measurements. Methods: This retrospective study included 106 patients who were treated with retention at the orthodontic department of Taipei Medical University Hospital. Hard-tissue variables were measured using lateral cephalographic tracings, and nine smile esthetic variables were measured using facial photographs. The patients were divided into three groups according to their overjet (< 0, 0-4, and > 4 mm). An analysis of variance was conducted to compare the pretreatment cephalometric variables and smile esthetic variables among the three groups. Multiple linear regression analysis was performed to identify the cephalometric factors affecting the smile measurements in each group. Results: Except the upper midline and buccal corridor ratio, all of the smile measurements differed significantly among the three groups before orthodontic treatment. Some of the smile characteristics were correlated with the cephalometric measurements in different types of malocclusion. The overjet was the major factor influencing the smile pattern in all three types of malocclusion. Conclusions: Smile characteristics differ between different types of malocclusion; the smile may be influenced by skeletal pattern, dental procumbency, or facial type. These findings indicate that establishment of an optimal horizontal anterior teeth relationship is the key to improving the smile characteristics in different types of malocclusion.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.18 no.3
• /
• pp.185-195
• /
• 2002

Purpose This article describes the historic and clinical aspects of the determination of the vertical dimension of occlusion and the synoptic procedure of the determination of the vertical dimension of occlusion in complete denture. The determining procedure of the susceptible vertical dimension of occlusion is one of the most important steps in construction of complete denture and prosthodontic treatment. It is considered essential for the improvement and the recovery of facial esthetics and stomatognathic functions. Results Several methods have been suggested for measurement of the vertical dimension of occlusion in the construction of complete denture and the prosthodontic rehabilitation. These range from pre-extraction records to the use of physiologic rest position, swallowing, phonetics, esthetics and facial proportion, etc. But, there is no universally accepted or completely accurate method. There seems to be no significant advantages of one technique other than those of cost, time and equipment requirements, and seems to be in controversial in determining the vertical dimension. Conclusion The vertical dimension of occlusion should be determined and reinspected carefully by dentist for a successful prosthesis with several methods. The more investigations are necessary for more objective and scientific techniques in determining the vertical dimension of occlusion.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.19 no.4
• /
• pp.317-323
• /
• 2003

When making crown and bridges on anterior regions, many practitioners consider the esthetics the most. For this reason functional aspect are not considered as much as the esthetics. If the occlusion on the anterior region are not formed correctly, movement of the temporomandibular joint can be disturbed and excessive stress can be occur that pathologic condition can be under lied. On this case presentation will show the importance of the anterior guidance and suggest the appropriate protocol of using customized anterior guide table. A 45years old male had to remake both of the upper central and lateral PFM because of the porcelain fracture. The new PFM crowns were made conventional methods without considering the anterior guidance. After the temporary setting, the patient complained of discomfort and short looking upper anteriors. To solve these problems we had to restore the palatal contour and length of the new crowns by making customized anterior guide table using temporary crowns that contains patient's old anterior guidance. This procedure which is copying the pt's comfortable anterior guidance to the final prosthesis made them to be esthetic and patients to feel comfortable.

• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.25 no.1
• /
• pp.4-14
• /
• 2016

Although CAD/CAM technology has been used in dentistry for more than decades, the present CAD/CAM dentistry is still quite inefficient or unesthetic. Zirconia restoration has faced with two contradictory words, 'Efficiency' and 'Esthetics'. One can consider monolithic zirconia restoration to be efficient with CAD/CAM. The monolithic zirconia restoration, however, is rarely esthetic due to the current limitations with zirconia. On the contrary, porcelain build-up is almost indispensible in fabricating esthetic restoration, especially in anterior region. In this article, the current status of monolithic zirconia restoration and clinical cases will be presented.

• The Journal of the Korean dental association
• /
• v.50 no.3
• /
• pp.126-139
• /
• 2012

Loss of dentition can lead to not only compromised esthetics and functions of the patient, but also alveolar bone resorption. Bone grafting with prosthetic reconstruction of the gingiva can be selected for the treatment, and it provides many benefits as prosthetic gingival reconstruction does not require a complicated surgical process and is available within a short period of time, with stable clinical results. However, conventional porcelain fused to metal prosthesis has certain limits due to its size, and deformation after several firing procedures. In this clinical report, the author would like to introduce a patient with severe alveolar resorption who was treated with gingiva-shaped zirconia/titanium CAD/CAM implant fixed prosthesis for esthetic and functional rehabilitation. Clinical reports Clinical report 1, 2 : A case of loss of anterior dentition with atrophied alveolar bone. Implant retained zirconia bridge applied with Procera implant bridge system to simulate the gingiva. Upper structure was fabricated with zirconia all ceramic crown. Clinical report 3, 4 : A case of atrophied maxillary alveolus was reconstructed with fixed implant prosthesis, a CAD/CAM designed titanium structure covered wi th resin on its surface. Anterior dentition was reconstructed with zirconia crown. Conclusion and clinical uses. All patients were satisfied with the outcome, and maintained good oral hygiene. Zirconia/titanium implant fixed prosthesis fabricated by CAD/CAM system was highly accurate and showed adequate histological response. No critical failure was seen on the implant fixture and abutment overall. Sites of severe alveolar bone loss can be rehabilitated by implant fixed prosthesis with CAD/CAM system. This type of prosthesis can offer artificial gingival structure and can give more satisfying esthetics and functions, and as a result the patients were able to accept the outcome more fondly, which makes us less than hard to think that it can be a more convenient treatment for the practitioners.