• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.58 no.3
• /
• pp.193-198
• /
• 2022

In this study, for the purpose of reducing the catch of small giant octopus in a net pot, an escape experiment of octopus was performed on five types of escape rings of different sizes. As a result of the experiment, the smallest giant octopus with a weight of 406 g was found to escape from an escape ring with a diameter of 30 mm or larger, and 592 g octopus, a weight similar to the octopus of the current minimum landing weight (600 g), escaped from an escape ring with a diameter of larger than 40 mm. An individual weight with 406 g becomes 39 mm when converted from a diameter of 25 mm circular escape vent; that is, the circumference to the inner diameter of the mesh. It can be inferred that the converted mesh size of 39 mm cannot escape. Logistic regression analysis was performed using a generalized linear model (GLM) to investigate the correlation between the ratio of escape ring size/Mantle diameter (R/MD) and the escape rate. As a result, it was found that there was a significant correlation between the R/MD ratio and the escape rate and that the higher the R/MD ratio, the greater the escape rate. As a result of logistic regression analysis, the R/MD value was denoted 0.520 with the 50% escape rate. In addition, it can be estimated to be about 50 mm when converted to the mesh size. Therefore, in this study, the diameter of the escape ring and the size of the escape possible of the octopus were experimentally considered. It was found that there was a significant correlation.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.9 no.4
• /
• pp.89-95
• /
• 2005

Thrust cut off(TCO) system is installed at the port of a rocket motor case forward dome. The snap ring and the closure are escaped sequentially by pulling out a wedge under internal pressure. The hydraulic structural tests of TCO and numerical simulations were performed, and both results were compared to understand the deformation behavior of TCO. By increasing splines symmetrically, the sealing capacity of TCO can be improved significantly. The escape pressure of TCO increases according to the increase of friction coefficient and there is a critical friction coefficient beyond which the snap ring can not be nearly escaped even after forced escape of wedge. Under low friction coefficient the snap ring is contracted to radial direction and easily escaped. But, under high friction coefficient, the snap ring can not be escaped from the port even after severe plastic deformation.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.44 no.1
• /
• pp.1-9
• /
• 2008

This study aims to reduce the bycatch of young fishes and other species in the octopus(Octopus vulagris, Octopus dolfleini) trap fishery on the East Sea, Korea. We carried out field experiments and tank experiments to verify the fishing efficiency and bycatch with the different 8 types of trap. 4 of them had mesh size 20, 35, 55 respectively and 75mm, 2 of them with escape ring of diameter 30mm and 50mm and 2 of them with escape device. The gap was 20 and 40mm respectively. The mesh sizes of the traps with ring and frame were 20mm. The traps with mesh size 20 and 35mm were not reasonable because it could fish under 300g octopus as bycatch which is not permitted by the Korean fisheries regulations. The catch number of octopus over 300g by traps with escape ring of diameter 30mm was 53. The catch of trap with mesh size 20mm was 54. The catch of trap with mesh size 35mm was 53. There is no significant difference among them. The catch number of octopus over 500g that is fishermen's favorite one was 46 in the trap with escap ring. The diameter of was 30 mm and the catch of trap with mesh size 20mm was more 3 catch and the catch of trap with mesh size 35mm had 6 more catch. Fishermen wanted to catch over 500g octopus because the octopuses had commercial value. The traps with escape ring can be replaceable with he traps with mesh size 20 or 35mm because the trap is suitable to conserve the octopus resources and keep the fishermen's fishing substantiality.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.9
• /
• pp.798-802
• /
• 2005

The plating shape in the opening of photoresist becomes gradated shape in the fountain plating system, because bubbles from the wafer surface are difficult to escape from the deep openings, vias. In this paper, the bubble flow from the wafer surface during plating process was studied and we designed the tilted electrode ring to get uniform bump height on all over the wafer and evaluated the film uniformity by SEM and $\alpha-step$. In a-step measurement, film uniformities in the fountain plating system and the tilted electrode ring contact system were $\pm16.6\%,\;\pm4\%$ respectively.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07a
• /
• pp.323-327
• /
• 2004

The bubble flow from the wafer surface during plating process was studied in this paper. The plating shape in the opening of photoresist becomes gradated shape in the fountain plating system, because bubbles from the wafer surface are difficult to escape from the deep openings, vias. So, we designed the tilted electrode ring contact to get uniform bump height on all over the wafer and evaluated the film uniformity by SEM and ${\alpha}-step$. In ${\alpha}-step$ measurement, film uniformities in the fountain plating system and the tilted electrode ring contact system were ${\pm}16.6%,\;{\pm}4%$ respectively.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07a
• /
• pp.366-369
• /
• 2003

The vertical fountain plating system with the point contact has been used in semiconductor industry. But the plating shape in the opening of photoresist becomes gradated shape, because bubbles from the wafer surface are difficult to escape from the deep openings, vias. So, we designed the tilted electrode ring contact to get uniform bump height on all over the wafer and evaluated the film uniformity by SEM and $\alpha$-step. A photoresist was coated to a thickness of $60{\mu}m$ and vias were patterned by a contact aligner After via opening, solder layer was electroplated using the fountain plating system and the tilted electrode ring contact system. In $\alpha$-step measurement, film uniformities in the fountain plating system and the tilted electrode ring contact system were ${\pm}16%,\;{\pm}3.7%$ respectively. In this study, we could get high uniformity bumps by the tilted electrode ring contact system. So, tilted electrode ring contact system is expected to improve workability and yield in module process.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2019.10a
• /
• pp.34-37
• /
• 2019

The drone uses a Microwave Doppler Radar Sensor which operates at 10.525GHz to recognize harmful animal which intruded into the arable land. Moreover provide user with notification services on risk factors. Subsequently, the user the drone's camera and a camera-only app to watch the farmland in real-time, steer the drone directly, and use the NeoPixel LED ring and the speaker to stimulate the harmful animal's sight and hearing to induce escape.

• Journal of Microbiology and Biotechnology
• /
• v.32 no.1
• /
• pp.15-26
• /
• 2022

Luteolin is a common dietary flavone possessing potent anti-inflammatory activities. However, when administrated in vivo, luteolin becomes methylated by catechol-O-methyltransferases (COMT) owing to the catechol ring in the chemical structure, which largely diminishes its anti-inflammatory effect. In this study, we made a modification on luteolin, named LUA, which was generated by the chemical reaction between luteolin and 2,2'-azobis(2-amidinopropane) dihydrochloride (AAPH). Without a catechol ring in the chemical structure, this new flavone could escape from the COMT-catalyzed methylation, thus affording the potential to exert its functions in the original form when administrated in the organism. Moreover, an LPS-stimulated RAW cell model was applied to detect the anti-inflammatory properties. LUA showed much more superior inhibitory effect on LPS-induced production of NO than diosmetin (a major methylated form of luteolin) and significantly suppressed upregulation of iNOS and COX-2 in macrophages. LUA treatment dramatically reduced LPS-stimulated reactive oxygen species (ROS) and mRNA levels of pro-inflammatory mediators such as IL-1β, IL-6, IL-8 and IFN-β. Furthermore, LUA significantly reduced the phosphorylation of JNK and p38 without affecting that of ERK. LUA also inhibited the activation of NF-κB through suppression of p65 phosphorylation and nuclear translocation.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.21 no.1
• /
• pp.91-96
• /
• 2015

In this study, we performed a study on prevention of the escape hoist heavy objects on the basis of the case of a disaster occurring during crane operations. A safety hook of the automatic fastening and coupling method by the conventional coupling method, the weight of the outside consisting of a combination of a safety ring structure was designed and manufactured. The main mechanism three-dimensional detail design and structural analysis confirmed the structure and stability of small strain than the allowable stress of the Safety Hook with X-jog through. Safety factor was confirmed to represent the average 1.5 to 1.2 higher than the safety factor to be considered in the general design structure. Therefore, Safety Hook and X-jog in the present study is to be operated upon structural stability is a structure attached to the hoist and crane are considered sufficient.

• 한국벤처창업학회:학술대회논문집
• /
• 2007.11a
• /
• pp.143-174
• /
• 2007

The objective of Starts-up education rears leading company that minimize a risk & connect them with successful idea. Internet Starts-up education is serviced in public & civil parts, it is insufficient to reach successful Starts-up support. This study is targeting on review the present condition of the Internet Starts-up education, research which it sees Internet Starts-up education actual condition investigation through investigation student of education satisfactorily and education contents and the plan to grope an Starts-up education progress coat problem and developmental plan it did. The current events point which has become research result escape first, age of the students of education, followed in educational background and, education motive and education experience presence education satisfactory boat song it appeared in these demand different, base grudge the form which is various it fixed and the education was demanded. Second, currently the department of pedagogy joining in establishment leader against the technical element which is advanced swip, the education reinforcement against an enterprise accomplishment ability back human factor, an enterprise propulsion environment and an enterprise item back enterprise environment element was demanded. Time after support and consulting, completion lifestyle community construction, completion lifestyle for item connection support and the trade name net after third, establishing an enterprise we the king, after toe ring back educating which carries on shoulder the importance of the civil official was embossed. The study which it sees led and like this investigation analysis the education progress for the successful support of the Internet Starts-up and time after connection setup construction it led and the plan which it will put out advancement of Starts-up education and it groped.