• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2008.11a
• /
• pp.744-747
• /
• 2008

Quantity information focused on a design drawing plays a critical role in a decision making related to cost for project participants during project life cycles. Related participants absolutely depend on quantity take-off working which produces the quantity information by hand, and then a worker's mistake often causes many errors. The difference of quantity by the know-how of the person in charge of the estimation also occurs. In addition, the worker passes through the whole quantity take-off processes again in case of re-working for quantity take-off produced by a change order. The requirements about the automated estimation increase because of the needs for the accurate quantity take-off and dealing with the change order and recently, the studies about the automated estimation working process based on 34 cad model from 3d cad modeler are attempted in various viewpoints. However, the existing studies reach the limits such as common quantity data type framework for getting Quantity information. Focused on a certain 34 cad modeler and BIM based automation of estimation using it Therefore, the objective of this study is to develop the a series of system which can extract, analyze, and verify Quantity Data Type in modeler to automate quantity take-off originated from various 3d cad modelers as a foundation study for BIM based automation of estimation framework.

• Journal of the Korean Society of Radiology
• /
• v.12 no.3
• /
• pp.343-349
• /
• 2018

Dose rate regulated tracking is known to be an efficient method which adaptively delivers tracking treatments when patient breathing is irregular. The Motion Management Interface (MMI, Varian Medical System, CA), which provides beam on/off switching during treatment is available for clinic. Study is to test if delivering the adaptive tumor tracking is feasible for irregular breathing using beam switching with MMI. 55 free breathing RPM traces acquired from lung cancer patients are used. The first day RPM traces of the patients are utilized to design preprogrammed tracking MLC patterns, of which periods are intentionally reduced by 20% in order to catch up the variation of patient breathing irregularity in the treatment day. Eligibility criteria for this technique are the variation of amplitude and period less than 20%. An algorithm which determines beam on/off every 100 ms by considering the preprogrammed (MLC) positions and current breathing positions is developed. Tracking error and delivery efficacy are calculated by simulating the beam-switching adaptive tracking from the RPM traces. Breathing patterns of 38 patients (70%) met the eligibility criteria. Tracking errors of all of the cases who meet the criteria are less than 2 mm (average 1.4 mm) and the average delivery efficacy was 71%. Those of rest of the cases are 1.9 mm and 48%. Adaptive tracking with beam switching is feasible if patient selection is based on the eligibility criteria.

• Korean Journal of Construction Engineering and Management
• /
• v.18 no.6
• /
• pp.78-88
• /
• 2017

With the growing use of BIM in the AEC industry, various new applications are being developed to meet these specific needs. Such developments have increased the importance of Industry Foundation Classes, which is the international standard for sharing BIM data and thus ensuring interoperability. However, mapping individual BIM objects to IFC entities is still a manual task, and is a main cause for errors or omissions during data transfers. This research focused on addressing this issue by applying novelty detection, which is a technique for detecting anomalies in data. By training the algorithm to learn the geometry of IFC entities, misclassifications (i.e., outliers) can be detected automatically. Two IFC classes (ifcWall, ifcDoor) were trained using objects from three BIM models. The results showed that the algorithm was able to correctly identify 141 of 160 outliers. Novelty detection is thus suggested as a competent solution to resolve the mapping issue, mainly due to its ability to create multiple inlier boundaries and ex ante training of element geometry.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.4
• /
• pp.86-98
• /
• 2018

Since 2015, the Korea Expressway Corporation has provided predicted travel time information, which is reproduced from DSRC systems over the extended expressway network in Korea. When it is open for public information, it helps travelers decide optimal routes while minimizing traffic congestions and travel cost. Although, sutiable evaluations to investigate the reliability of travel time forecast information have not been conducted so far. First of all, this study seeks to find out a measure of effectiveness to evaluate the reliability of travel time forecast via various literatures. Secondly, using the performance measurement, this study evaluates concurrent travel time forecast information in highway quantitatively and examines the forecast error by exploratory data analysis. It appears that most of highway lines provided reliable forecast information. However, we found significant over/under-forecast on a few links within several long lines and it turns out that such minor errors reduce overall reliability in travel time forecast of the corresponding highway lines. This study would help to build a priority for quality control of the travel time forecast information system, and highlight the importance of performing periodic and sustainable management for travel time forecast information.

• Korean Journal of Construction Engineering and Management
• /
• v.16 no.5
• /
• pp.77-85
• /
• 2015

The Hedonic Pricing model is the predominant approach used today to model the effect of relevant factors on real estate prices. These factors include intrinsic elements of a property such as floor areas, number of rooms, and parking spaces. Also, The model also accounts for the impact of amenities or undesirable facilities of a property's value. In the latter case, euclidean distances are typically used as the parameter to represent the proximity and its impact on prices. However, in situations where multiple facilities exist, multi-colinearity may exist between these parameters, which can result in multi-regression models with erroneous coefficients. This research uses Variance Inflation Factors(VIF) and Ridge Regression to identify these errors and thus create more accurate and stable models. The techniques were applied to apartments in Guro-gu of Seoul, whose prices are impacted by subway stations as well as a public prison, a railway terminal and a digital complex. The VIF identified colinearity between variables representing the terminal and the digital complex as well as the latitudinal coordinates. The ridge regression showed the need to remove two of these variables. The case study demonstrated that the application of these techniques were critical in developing accurate and robust Hedonic Pricing models.

• The KIPS Transactions:PartD
• /
• v.13D no.2 s.105
• /
• pp.271-278
• /
• 2006

This paper presents industry feedback and a case of improvement trial on enabling reuse driven software development which is one of several activities to improve software quality and productivity in a company which develops software that are embedded into consumer electronic products. Several case studies will be introduced that are related to software reuse strategies and practices to show how to establish environment for reuse basis in a company, how to apply it to development team and project and how to improve that through trials and errors. To enable reuse-oriented software development in a huge company, integrated and focused approach is needed among technical, management and environmental point of view. We tried to solve that problem in technical field with reuse method, in management filed with reuse metric and in environment field with reuse repository. The characteristics of our software development environment could be summarized as below. The first, embedded software which would not independent to hardware devices and the second, it is very huge company which develops extremely various products by many different organization with different domain characteristics and the third, development lead time is extremely short and many variation models are stems from basic models. We expect that our study would give contribution to industry struggling to solve similar problem for presenting our experience and could be a reference model for enabling software reuse in a real world practically.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.10 no.4
• /
• pp.87-96
• /
• 2007

In this study, a Ridge Distinction Program was developed to improve the elevation standard, which is one of standards for mountainous districts conversion permission regulated by the Management of Mountainous Districts Act. To distinguish mountainous districts from other land types, this program assumed that the lower end of the mountainous districts is the outlet points where catchment size is 30ha. Also the program used the halfway line between the ridge and the lower end of the mountainous districts to recognize the upper slope areas. To prevent potential errors within the classification process, the areas that were classified as non-mountainous districts by the current forest type map were removed. According to the classification results by using the developed program, the 58% of the mountainous districts ($696,300m^2$) was classified into the upper slope area, while the only 3% of the mountainous districts ($30,956m^2$) were classified by adopting the current standards for the mountainous districts conversion permission. This result shows that the size of the upper slope areas tends to be altered by the standards defining the area. Therefore, for better acceptance of the Ridge Distinction Program in the associated fields, it is necessary to prove the effectiveness of the program and to revise the current standards for the mountainous districts conversion permission.

• Journal of Biosystems Engineering
• /
• v.38 no.4
• /
• pp.228-239
• /
• 2013

Purpose: The objectives of this study were to develop an automated disinfectant dilution system, and an automated data management system for spraying amount for resolving uncertainty problem. Methods: Proper diluting rate was made by a controlled volume pump for liquid disinfectant and a screw conveyer pump for solid disinfectant. The water capacity of disinfecting system of 400 L was controlled by two water level sensors. The water quantity of water tank was controlled by the signals which were produced by the water level sensors. Signals were processed by Labview Programming, and ON/OFF of solenoid valve that was used for controlling water supplying to water tank, was controlled by SSR. The operating time of pumps for disinfectant was controlled quantitatively. A turbine flowmeter was used for development of automated measurement system for spraying amount of disinfectant. In order to save the flowmeter data and to control the spraying system, a multi-function data logger was used, and it was processed and saved in Excel file by a program developed in this study. Results: Labview 2010 was used for programming to control the automated measurement system for spraying amount of disinfectant. Results showed that the relationship between flowmeter value and time had a significant linear relationship such as 0.99 of $R^2$. Generally, 6.74 L/s of diluted disinfectant is sprayed for a vehicle passing through the disinfection system (about 15 seconds). Test results showed that average error between the measured spraying amount and the flowmeter data was 50 mL, and the range of error was 1.3%. Since the amount and time of spraying could be saved in real-time by using the spreadsheet files which could not be modified arbitrarily, it made possible to judge objectively whether the disinfection spraying was performed or not. Test results of spraying liquid and solid disinfectant showed that the errors between the measured discharge rate and the theoretical one were ranged within 3-4% for various dilution rates. Conclusions: The disinfection system developed would be working accurately. The automated spraying data base management system satisfied the purpose of this study. The automated dilution process system developed in this study could discharge liquid and solid disinfectant with accurate dilution rate, relatively.

• Health Policy and Management
• /
• v.21 no.1
• /
• pp.93-114
• /
• 2011

This study was conducted to identify college students' supportive attitude toward the elderly and their awareness of the socialization of care for the elderly, since they will have the responsibility for and the support of the aged society in the near future. This study was also conducted to analyze the factors which affect the socialization of elderly care, and to contribute to building a care system which promotes ahealthy and happy lifestyle for the elderly. After conducting a survey of 1,100 students from13 universities around the entire country, I have analyzed 1,089 data forms, and omitted 11 data entries which had errors or were not answered. 1. Those surveyed are 1,089 students from 13 universities around the entire country. Regional distributions are as follows : 263 students from 4 universities in Daegu and Kyongsangbuk Do(24.2%), 291 students from 3 universities in Busan and Kyongsangnam Do(26.7%), 272 students from 2 universities in Jeolla Do(25.0%), 263 students from 4 universities in Seoul and Gyeonggi Do. Males are 51.7% and females are 48.3% of these students. 2. Instrumental supportive sense level is high in men and emotional supportive sense level is higher in women. Also emotional supportive sense is higher in groups of those having more family members and coming from agricultural regions. 3. The sense of living with aged parents is higher in those living with grandparents than those living separate. The sense of living with sons and daughters after aging is stronger in the students from the Science and Engineering Departments than in the Social and Human Sciences Departments; also higher for men than women. 4. Recognition of elderly care socialization is higher in those from Social and Human Sciences Departments than from Science and Engineering Departments; higher in the case of upper classmenand aged groups, groups having fewer family members than more family members, and in the case of living separated from grandparents. 5. The factors affecting the sense of living with grandparents were family cohesion and instrumental supportive sense. The factors affecting the sense of elderly care socialization were family cohesion, instrumental supportive sense, and emotional supportive sense. From the results it is concluded that to insure a healthy and happy lifestyle for aged people, elderly care socialization offered by society and the country must provide desirable, appropriate care services based on the centralized support system of the family. In order to do this, we propose that elderly care needs inter-family and inter-generational fusion programs to improve family cohesion and care recognition. Also, elderly care is in urgent need to build a strong Family and Health Welfare System for care socialization.

• Management & Information Systems Review
• /
• v.37 no.3
• /
• pp.65-81
• /
• 2018

This study estimated the long-run and the short-run price and income elasticity of crude oil demand by using the ARDL model in Korea. First, the long-run cointegration relationship existed between crude oil demand and price or income in the ARDL-bounds tests. Second, the long-run own price, the cross price elasticity and the income elasticity were both statistically significant elastic and sensitive in the ARDL. Third, there was autocorrelation of the residuals, but no misspecification errors and heteroscedasticity, and then the residuals showed a normal distribution. And the CUSUM & CUSUMSQ tests showed that the coefficients were stable. Fourth, the short-run own price, the cross price elasticity and the income elasticity were both statistically significant elastic and sensitive in the ARDL-RECM. The ECM with the short-run dynamics showed rapid adjustments in the long-run equilibrium of oil demand after the economic crisis. In the short-run, the sensitivity of crude oil demand to price and income changes has moved in the same direction as the long-run case. Korea, depending too much on foreign crude oil, is vulnerable to the shocks of oil prices, so rising oil prices can certainly have a negative impact on Korea's trade balance. And the elasticity of long-run oil prices may help to control and manage Korea's oil demand. The government needs to strengthen monitoring of the country's policies and market trends related to crude oil, establish strategies to customize national policies and market conditions, and strengthen active market dominance efforts through pioneering new market and diversification.