• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.5
• /
• pp.103-109
• /
• 2014

This paper related with the CR-MMA which is possible to improving the equalization performance by applying the concept of constellation reduction in the MMA adaptive equalization alogorithm in order to reduce the intersymbol interference that is occurred in the nonlinear communication channel. In the updating process of MMA adaptive equalizer, the error signal is being obtained by using the equalizer output, and the performance will be degraded by the increase the error signal in the high order QAM constellation. But by using the constellation reduction, the high order QAM signal will be changed to the 4-QAM signal constellation and then the error signal will be obtained. By doing so, the error signal will be minimized and it is possible to improve the equalization performance in the high order QAM transmitted signal. The Computer simulation was performed in order to compare the performance of the proposed CR-MMA algorithm and original MMA algorithm in the same communication channel and noise environment. For this, the recoverd signal constellation which is the output of equalizer, residual isi and MD (Maximum Distortion) learning curve which is represents the convergence performance and SER which is represents the roburstness of noise were used. As a result of simulation, the CR-MMA has more superior to the MMA. And it was confirmed that the CR-MMA has roburstness to the noise in the SER performance.

• Journal of Korean Society on Water Environment
• /
• v.36 no.2
• /
• pp.98-108
• /
• 2020

The purpose of this study was to evaluate water quality in Hapcheon dam via using the Hydrological Simulation Program-Fortran (HSPF) model and applied livestock reduction scenarios. Hapcheon dam watershed input data for the HSPF model were established using the stream, land use, digital elevation map and meteorological data and others. The HSPF model was calibrated and validated using the observed water quality data from 2000 to 2016. For water quality simulation, we calculated the generated and discharge loads of the population, livestock, industry and land use following the guideline provided by the Ministry of Environment. The pollutant data were obtained from National Institute of Environmental Research (NIER). The monthly discharge load were estimated by applying the delivery rate. The calibration and validation results showed that the annual mean BOD had a difference of 0.22 mg/L and an error of ±13 %, T-N had a difference of 0.66 mg/L and an error of ±16 % and T-P had a difference of 0.027 mg/L and an error of ±13 %. In order to evaluate the nonpoint pollutants management effects, we applied livestock reduction scenarios because livestock consists of the largest portion of pollutants. As a result of the 20 % of livestock reduction, BOD, T-N and T-P decreased by 3 %, 1 % and 3 %, respectively. When 40 % of livestock reduction was applied, BOD, T-N and T-P decreased by 5 %, 3 % and 4 %, respectively. Based on the results of this study, effective pollutant management methods can be applied to improve the water quality and achieve the target water quality of Hapcheon dam watershed.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.1205-1208
• /
• 1996

This paper proposes balanced model reduction of non-minimum phase plant. The algorithm presented in this paper is to convert high-order non-minimum phase plant into low-oder minimum phase plant using balanced model reduction. Balanced model reduction requires the error bound that Hankel singular value produces. This algorithm shows the tolerance that admits the method of this paper.

• International Journal of Control, Automation, and Systems
• /
• v.6 no.2
• /
• pp.180-185
• /
• 2008

A new method for relative error continuous and discrete time model order reduction is proposed. The reduction technique is based on two recently developed methods, namely frequency domain balanced truncation within a frequency bound and inner-outer factorization techniques. The proposed method is of interest for practical model order reduction because in this context it shows to keep the accuracy of the approximation as high as possible without sacrificing the computational efficiency. Numerical results show the accuracy and efficiency enhancement of the method.

• Journal of the Korean Society of Safety
• /
• v.16 no.3
• /
• pp.117-124
• /
• 2001

This paper introduces m analysis framework and procedure for the support of the cognitive error analysis of emergency tasks in nuclear poler plants. The framework provides a new perspective in the utilization of influencing factors into error prediction. The framework can be characterized by two features. First, influencing factors that affect the occurrence of human error me classified into three groups, i.e., task characteristic factors(TCF), situation factors(SF), and performance assisting factors(PAF). This classification aims to support error prediction from the viewpoint of assessing the adequacy of PAF under given TCF and SF. Second, the assessment of influencing factors is made by each cognitive function. Through this, influencing factors assessment and error prediction can be made in an integrative way according to each cognitive function. In addition, it helps analysts identify vulnerable cognitive functions and error factors, and obtain specific nor reduction strategies. The proposed framework was applied to the error analysis of the bleed and feed operation of nuclear emergency tasks.

• Aerospace Engineering and Technology
• /
• v.11 no.2
• /
• pp.96-102
• /
• 2012

Recently, interests about frame error reduction method, using multiple PCM data which are received at several ground stations, are increasing. Simple data merge method is already applied to data processing system at Naro Space Center and have been used in the first and the second flight test analysis of KSLV-I. This paper is focused on error reduction with error correcting merge algorithm and time-delayed data correction algorithm. Result of applying the proposed algorithms to the flight test data shows 1.32% improvement in error rate, compared to simple-data-merge method. It is considered that presented algorithms could be very useful in generating various telemetry merge data.

• Journal of the Semiconductor & Display Technology
• /
• v.21 no.4
• /
• pp.132-137
• /
• 2022

In this paper, we have studied the quadrature error reduction for the single drive 3-axis MEMS Gyroscope. There was a limitation of the previous study which is the z-axis quadrature error was large. To reduce this value, design methodologies were presented. And the methodologies included a different mesh application, z-rate spring structure change, and mass compensation for balancing of the structure. We conducted the modal analysis, drive mode analysis and sense mode analysis using COMSOL Multiphysics. As a result, a drive resonant frequency was 26003 Hz, with the x-sense, y-sense, z-sense being 26749 Hz, 26858 Hz, 26920 Hz, respectively. And the Mechanical sensitivity was computed at 2000 degrees per second(dps) input angular rate while the sensitivity for roll, pitch, and yaw was computed 0.011, 0.012, and 0.011 nm/dps respectively. And z-axis quadrature error was successfully improved, 2.78 nm to 0.95 nm, which the improvement rate was about 66 %.

• International Journal of Computer Science & Network Security
• /
• v.24 no.3
• /
• pp.182-188
• /
• 2024

Hardware components are an integral part of Hardware Define Radio (HDR) for seamless operations and optimal performance. On the other hand, Software Define Radio (SDR) is a program that does not rely on any hardware components for its performance. Both of the latter radio programmers utilize modulation functions to make their core components from signal processing viewpoint. The following paper concentrates on SDR based modulation and their performance under different modulations. The bit error rate (BER) of modulations such as PSK, QAM, and PSAM were used as indicators to test channel quality estimation in planar Rayleigh fading. Though it is not commonly used for channel fading, the method of the adder determines the regionally segmented channel fading. Thus, the estimation error of the channel change substantially reduces the performance of the signal, hence, proving to be an effective option. Moreover, this paper also elaborates that BER is calculated as a function of the sample size (signal length) with an average of 20 decibels. Consequently, the size of the results for different modulation schemes has been explored. The analytical results through derivations have been verified through computer simulation. The results focused on parameters of amplitude estimation error for 1dB reduction in the average signal-to-noise ratio, while the combined amplitude deviation estimation error results are obtained for a 3.5 dB reduction

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.41 no.3
• /
• pp.111-120
• /
• 2004

This paper proposes a vector error diffusion method for smear artifact reduction in the boundary region. This artifact mainly results from a large accumulation of quantization errors. In particular, color bands with a smear artifact, the width of a few pixels appear along the edges. Accordingly, to reduce this artifact, the proposed halftoning process excludes the large accumulated Quantization error by comparing the vector norms and vector angles between the error-corrected vector and eight primary color patches. When the vector norm of the error corrected vector is larger than those of eight primary color patches, the quantization error vector is excluded from the quantization error distribution process. In addition, the quantization error is also excluded when the angle between eight primary color patches and error corrected vector is large. As a result, the proposed method enables a visually pleasing halftone pattern to be generated by all three color separations into account in a device- independent color space and reduces smear artifact in the boundary regions.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.04a
• /
• pp.64-69
• /
• 2004

The work presented here deals with controller design using error model constructed with proportional control ramp response. The design aims at the improvement of transient response, steady-state error reduction with stability preservation, generation of the consistent contour error through the proportional gain regulation of a mismatched system. The first step is to generate tracking-error curve with proportional control only and decide the added error signal shape on the error curve. The next is to construct a table for the steady-state loop gain with step input. The table is used for selecting the proportional gain. The effectiveness of the proposed controller is confirmed through the simulation and experiment.