• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.12C
• /
• pp.1014-1020
• /
• 2008

Storage devices such as memories are widely used in various electronic products. They require high-density memory and currently the data has been stored in multi-level format, that results in high error rate. In this paper, we apply error correction schemes that are widely used in communication system to the storage devices for satisfying low bit error rate and high code rate. In A WGN channel with average BER $10^{-5}$ and $5{\times}10^{-6}$, we study error correction schemes for 4-1evel cell to achieve target code rate 0.99 and target BER $10^{-11}$ and $10^{-13}$, respectively. Since block codes may perform better than the concatenated codes for high code rate, and it is important to use less degraded inner code even when many bits are punctured. The performance of concatenated codes using general feedforward systematic convolutional codes are worse than the block code only scheme. The simulation results show that RSC codes must be used as inner codes to achieve good performance of punctured convolutional codes for high code rate.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.4
• /
• pp.1504-1514
• /
• 2018

The objective of this study is to compare the suitability of a non-parametric and 3 parametric distributions in the characterization of prediction intervals of photovoltaic power forecasts with high confidence levels. The prediction intervals of the forecasts are calculated using a method based on recent past data similar to the target forecast input data, and on a distribution assumption for the forecast error. To compare the suitability of the distributions, prediction intervals were calculated using the proposed method and each of the 4 distributions. The calculations were done for one year of day-ahead forecasts of hourly power generation of 432 PV systems. The systems have different sizes and specifications, and are installed in different locations in Japan. The results show that, in general, the non-parametric distribution assumption for the forecast error yielded the best prediction intervals. For example, with a confidence level of 85% the use of the non-parametric distribution assumption yielded a median annual forecast error coverage of 86.9%. This result was close to the one obtained with the Laplacian distribution assumption (87.8% of coverage for the same confidence level). Contrasting with that, using a Gaussian and Hyperbolic distributions yielded median annual forecast error coverage of 89.5% and 90.5%.

• Journal of the Korean Institute of Navigation
• /
• v.5 no.2
• /
• pp.1-39
• /
• 1981

A doppler log is the typical device which can measure the ship's speed over the ground directly, by means of doppler effect of the underwater ultrasonic wave, which involves the error due to the sea bottom inclination, the trim and the incorrect transducer installation etc. The present doppler log adopts a single transducer, faced in the direction of themain beam, and therefore it is unable to correct the beam direction to eliminate the above mentioned error. Moreover, the frequencyis also limitted in a comparatively high range for getting a sharp beam with single transducer, and the speed over the ground can not be detectable at the deep sea, for an instance, over 200 meters. This paper describes a theoretical consideration for the doppler log error and an analysis by a computer on the observed speed data by a full size model ship. The result is verified that the most of doppler log error is caused by the ultrasonic beam angle of transducer. To eliminate the doppler log error due to the incorrect transducer installation and also to sharpen the beam for lower frequency range to expand measurable sea depth, this paper proposes a method of controlling the directivity adopting a linear transducer array and of controlling the directivity by the control of exciting current, and investigates by the computer simulation and make experiment with magnetostrictive ferrite transducer of 28, 50 and 75KHz. The experimental results are shown well coincide with the measured ones, and they are revealed that in case where the transducer interval is greater than 1 wavelength, the effective control of the beam direction is hardly performed with keeping adequate beam width and side lobe level. It is concluded that 6-elements array with inter element space of a half wavelength can make comparatively sharp beam and low side lobe level. The results obtained here will contribute very much to the improvement of the performance of doppler log.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.6 no.2
• /
• pp.1-9
• /
• 1988

The main objective of the study is to execute the simultaneous adjustment of the secondary level net on the basis of the 1st order level net adjustment carried in 1987. Moreover, the basic raw field data obtained during last 21-years(’67~’87) is to be analyzed, corrected and edited in order to carry out a reasonable adjustment of the End order level net. As the result of the study, we obtained mean random error η＝1.99$^{mm}$ /√km, mean systematic error ξ＝2.09$^{mm}$ /√km, square root of the posterior reference variance $\sigma$$_{0}$ ＝9.12$^{mm}$ /√km and concluded that the accuracy obtained is good enough for the category of precision levelling.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.2 no.1
• /
• pp.59-64
• /
• 2009

In this paper, a novel low complexity linear receiver is proposed that is used at the receiver of MIMO systems. Zero-forcing (ZF) and minimum mean squared error (MMSE) receivers are common linear receivers. ZF receiver is simpler than MMSE receiver from the hardware implementation perspective, howerver, MMSE shows better performance than ZF. In general, MCS level changes according to channel condition. This paper shows the benefit of choosing between MMSE and ZF according to the selected MCS level. We implement the MCS-adaptive linear receiver as hardware, and show that its complexity is comparable to the conventional MMSE receiver.

• International Journal of Highway Engineering
• /
• v.15 no.4
• /
• pp.21-29
• /
• 2013

PURPOSES : The objective of this study is to provide for the overall SPL (Sound Pressure Level) prediction model by using the NCPX (Noble Close Proximity) measurement method in terms of regression equations. METHODS: Many methods can be used to measure the traffic noise. However, NCPX measurement can powerfully measure the friction noise originated somewhere between tire and pavement by attaching the microphone at the proximity location of tire. The overall SPL(Sound Pressure Level) calculated by NCPX method depends on the vehicle speed, and the basic equation form of the prediction model for overall SPL was used, according to the previous studies (Bloemhof, 1986; Cho and Mun, 2008a; Cho and Mun, 2008b; Cho and Mun, 2008c). RESULTS : After developing the prediction model, the prediction model was verified by the correlation analysis and RMSE (Root Mean Squared Error). Furthermore, the correlation was resulted in good agreement. CONCLUSIONS: If the polynomial overall SPL prediction model can be used, the special cautions are required in terms of considering the interpolation points between vehicle speeds as well as overall SPLs.

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2192-2195
• /
• 2002

Even though, tanks are used at the many industry plants, it is very difficult to control the tank level without any overflow and shortage; moreover, cause of its complication of dynamics and nonlinearity, it's impossible to realize the accurate control using the mathematical model which can be applied to the various operation modes. However, the sliding mode controller(SMC) is known as having the robust variable structures for the nonlinear control systems with the parametric perturbations and with the sudden disturbances. It's difficult to find SMC's parameters, and SMC is bring chattering which injures actuator and increases error. In this paper, Genetic Aloglism based Fuzzy Sliding Mode Controller(GA-FSMC) for the precise control of the coupled tank level was proposed. Genetic Algolism and Fuzzy logic are adapted to find SMC's parameters and reduce the chattering. The simulation result is shown that the tank level could be satisfactorily controlled with less overshoot and steady-state error by the proposed GA-FSMC.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.9
• /
• pp.287-300
• /
• 2021

The study is conducted to find out the impact of the country- and corporate-level governance and firm internationalization on stock liquidity of 120 listed firms in Japan, Hong Kong, Pakistan, and India. Panel data is used in the current study. The annual time span covered in the current study is 10 years. The current study explores results based on secondary data. The findings of the 'robust panel corrected standard error' estimator shows that the internationalization strategy of firms positively influences the stock liquidity. The internationalization strategy of multinational corporations proves to be an effective methodology for improving stock liquidity in the home market as well as abroad. The study also shows that a stronger relationship exists between stock liquidity and internationalization in those countries where the regulatory settings are effective, the judiciary system is efficient and shareholders' rights are protected. Corporate governance and stock liquidity are negatively associated. The study also finds a negative relationship between country-level governance mechanisms and stock liquidity. Whereas the 'robust panel corrected error' estimator shows a positive association between corporate governance mechanisms and firm internationalization. The study depicts that effective corporate governance motivates multinational companies to expand their business abroad.

• Proceedings of the KIEE Conference
• /
• 2002.07b
• /
• pp.1084-1087
• /
• 2002

This paper presents an improved fuzzy logic-based adaptive PWM technique. A fuzzy logic- based adaptive PWM technique determines the optimal output voltage vector which takes into account both direction of back-emf and direction of current error vector. This technique has a simple structure and a good level of stability, but it has disadvantages. The longer sampling period, the larger current error. Because there is no considerations of the current error magnitude of each phases. The proposed method improves the control performance by selecting the optimum switching pattern in which the magnitudes of current errors are considered introducing space vector concept. Simulation results using Matlab/Simulink show that the proposed control method reduces current error keeping the merit of previous one.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1998.04a
• /
• pp.670-677
• /
• 1998

Many of the adaptive noise control systems utilize a form of the least mean square (LMS) algorithm. In the active control of noise, it is common practice to locate an error microphone far from the control source to avoid the near-field effects by evanescent waves. Such a distance between the control source and the error microphone makes a certain level of time-delay inevitable and, hence, may yield undesirable effects on the convergence properties of control algorithms such as filtered-x LMS. This paper discusses the dependence of the convergence rate on the acoustic error path in these popular algorithms and introduces new algorithms which increase the convergence region regardless of the time-delay in the acoustic error path. Performances of the new LMS algorithms are presented in comparison with those by the conventional algorithms based on computer stimulations and experiments.